Should subsidies to urban passenger transport be increased? A spatial CGE analysis for a German metropolitan area

In many countries passenger transport is significantly subsidized in a variety of ways for various reasons. The objective of this paper is to examine efficiency, distributional, environmental (CO₂ emissions) and spatial effects of increasing different kinds of passenger transport subsidies discriminating between household types, travel purposes and travel modes. The effects are calculated by applying a numerical spatial general equilibrium approach calibrated to an average German metropolitan area. In extension to most studies focusing on only one kind of subsidy, we compare the effects of different transport subsidies within the same unified framework that allows to account for two features not yet considered simultaneously in studies on transport subsidies: endogenous labor supply and location decisions. Furthermore, congestion, travel mode choice, travel related CO₂ emissions and institutional details regarding the tax system in Germany are taken into account. The results suggest that optimal subsidy levels are either small or even zero. While subsidizing public transport is welfare enhancing, subsidies to urban road traffic reduce aggregate urban welfare. Concerning the latter it is shown that making investments in urban road infrastructure capacity or reducing gasoline taxes may even be harmful to residents using predominantly automobile. In contrast, pure commuting subsidies hardly affect aggregate urban welfare, but distributional effects are substantial. All policies cause suburbanization of city residents and (except for subsidizing public transport) contribute to urban sprawl by raising the spatial imbalance of residences and jobs but the effect is relatively small. In addition, the policies induce a very differentiated pattern regarding distributional effects, benefits of landowners and environmental effects.     

Commuter ride-sharing using topology-based vehicle trajectory clustering: Methodology,application and impact evaluation

This paper illustrates a ride matching method for commuting trips based on clustering trajectories, and a modeling and simulation framework with ride-sharing behaviors to illustrate its potential impact. It proposes data mining solutions to reduce traffic demand and encourage more environment-friendly behaviors. The main contribution is a new data-driven ride-matching method, which tracks personal preferences of road choices and travel patterns to identify potential ride-sharing routes for carpool commuters. Compared with prevalent carpooling algorithms, which allow users to enter departure and destination information for on-demand trips, the proposed method focuses more on regular commuting trips. The potential effectiveness of the approach is evaluated using a traffic simulation-assignment framework with ride-sharing participation using the routes suggested by our algorithm. Two types of ride-sharing participation scenarios, with and without carpooling information, are considered. A case study with the Chicago tested is conducted to demonstrate the proposed framework’s ability to support better decision-making for carpool commuters. The results indicate that with ride-matching recommendations using shared vehicle trajectory data, carpool programs for commuters contribute to a less congested traffic state and environment-friendly travel patterns.     

Metropolitan size and the impacts of telecommuting on personal travel

Telecommuting has been proposed by policy makers as a strategy to reduce travel and emissions. In studying the metropolitan size impact of telecommuting on personal travel, this paper addresses two questions: (1) whether telecommuting is consistently a substitute or complement to travel across different MSA sizes; and (2) whether the impact of telecommuting is higher in larger MSAs where telecommuting programs and policies have been more widely adopted. Data from the 2001 and 2009 National Household Travel Surveys are used. Through a series of tests that address two possible empirical biases, we find that telecommuting consistently had a complementary effect on one-way commute trips, daily total work trips and daily total non-work trips across different MSA sizes in both 2001 and 2009. The findings suggest that policies that promote telecommuting may indeed increase, rather than decrease, people’s travel demand, regardless of the size of the MSA. This seems to contradict what telecommuting policies are designed for. In addition, model results show that the complementary impact of telecommuting on daily travel is lower in larger MSAs, in terms of both daily total work trips and daily total non-work trips.     

Real-world gaseous emission characteristics of Euro 6b light-duty gasoline- and diesel-fueled vehicles

To accurately investigate vehicle emissions that have become major contributors to global air pollutants and greenhouse gases, test conditions have been transferred from laboratory type approval test cycles to real-world driving conditions. In this study, the real-world driving emissions of carbon monoxide (CO), total hydrocarbons (THC), nitrogen oxides (NO_x), and carbon dioxide (CO₂) from one gasoline and two diesel Euro 6b light-duty passenger vehicles were investigated by a portable emission measurement system (PEMS) in Lyon, France. NO_x and CO₂ emission controls remain critical to addressing the real-world driving emissions of Euro 6b vehicles. Notably, the tested gasoline vehicle emitted higher CO₂ emissions than diesel vehicles on all types of roads, especially on the urban road with an excess of 29.3–48.3%. The highest emission factors of gaseous pollutants generally occurred on the motorway for the gasoline vehicle, while on the urban road for diesel vehicles. In particular, for high-speed driving conditions, the gasoline vehicle gaseous emissions, especially NO_x emissions, were more affected by acceleration than diesel vehicle emissions. In addition, the CO emissions, especially THC emissions, for the gasoline vehicle, were more influenced by warm-start, especially cold-start, than those for diesel vehicles.     

Transportation serviceability analysis for metropolitan commuting corridors based on modal choice modeling

Major commuting corridors in metropolitan areas generally comprise multiple transportation modes for commuters, such as transit (subways or buses), private vehicles, or park-and-ride combinations. During the morning peak hour, the commuters would choose one of the available transportation modes to travel through the corridors from rural/suburban living areas to urban working areas. This paper introduces a concept of transportation serviceability to evaluate a transportation mode’s service status in a specific link, route, road, or network during a certain period. The serviceability can be measured by the possibility that travelers choose a specific type of transportation service at a certain travel cost. The commuters’ modal-choice possibilities are calculated using a stochastic equilibrium model based on general travel cost. The modeling results illustrate how transportation serviceability is influenced by background traffic flow in a corridor, value of comfort for railway mode, and parking fee distribution.     

Road pricing for congestion and accident externalities for mixed traffic of motorcycles and automobiles

Motorcycles play an important role in sharing the trip demand with automobiles for commuting, especially in many cities in Asia. However, the accident cost of a trip by motorcycle is higher than that of an automobile. This study analyzes the road pricing for the congestion and accident externalities of mixed traffic of automobiles and motorcycles. A model for equilibrium trips with no taxation and that for optimal trips with taxation are explored. The model is then applied to the Tucheng City–Banciao City–Taipei central business district corridor in Taipei metropolitan area. The findings in this case study show that the tax for accident externality is larger than that for congestion externality.     

A velocity and payload dependent emission model for heavy-duty road freight transportation

The paper develops a forecasting model of emissions from traffic flows embracing the dynamics of driving behavior due to variations in payload. To measure of emissions at the level of individual vehicles under varying payloads a portable emission measurement system is used. This paper reports on a model based on data at the level of individual vehicles for a representative road trajectory. The model aggregates the data to the level of a homogeneous flow dependent of velocity and specific power, which is dependent on payload weight. We find a lean specification for the model that provides emission factors for CO₂, NO_x, HC, CO, and NO₂. The results indicate that, in comparison with earlier models, NO_x emissions in particular tend to be underestimated.     

Car use,commuting and urban form in a rapidly growing city: evidence from Beijing

The links between urban form and travel behaviour have been widely studied in the field of travel demand management. However, the existing literature is dominated by case studies from the developed countries. A study of a city in a developing and industrialising country can add some fresh evidence to the debate on the impacts of urban form on travel patterns. Using household survey data from Beijing, this paper finds that aspects of urban form have significant effects on workers' car use and the duration of travel by car in journeys to work, while controlling for socio-economic factors and households’ preferences related to residential location. The sprawling patterns of land development play a negative role in reducing motorised commuting trips and shortening vehicle hours travelled in the current processes of rapid urban expansion and motorisation. Since urban sprawl is greatly influenced by growing market forces, the findings in this paper reveal the negative effects of regulation–liberation of land development management on travel behaviour modification.     

Comparing air pollution from ferry and landside commuting

Recent and anticipated growth in passenger ferry service has been complicated by concerns about air pollution from marine engines that are only starting to be regulated. While marine engines are known to be a significant and growing source category in some locations, sparse data and analytical difficulties have prevented rigorous comparisons of marine and on-land passenger travel. Using data gathered in the San Francisco Bay Area, we model emissions from three passenger ferries and the matching on-land travel that would be used by commuters if ferry service were not available. The results are analyzed parametrically for levels of ridership and induced travel demand, and for new technologies, including selective catalytic reduction and natural gas fuel. Results indicate that under some conditions, passenger ferries reduce some emissions (including particulate matter emissions) relative to the matching on-land service but increase others. Emissions of NO_X are particularly problematic––all the technologies examined lead to increased NO_X emissions due to ferry commuting. Some of the emissions comparisons are sensitive to mode split, ridership, or induced travel demand. However, NO_X emissions are not––ferry commuting always raises NO_X emissions, even with the most advanced technologies. Implications for local air quality regulators and for technology development are discussed.     

Analyzing spatiotemporal traffic line source emissions based on massive didi online car-hailing service data

Nowadays, the massive car-hailing data has become a popular source for analyzing traffic operation and road congestion status, which unfortunately has seldom been extended to capture detailed on-road traffic emissions. This study aims to investigate the relationship between road traffic emissions and the related built environment factors, as well as land uses. The Computer Program to Calculate Emissions from Road Transport (COPERT) model from European Environment Agency (EEA) was introduced to estimate the 24-h NOx emission pattern of road segments with the parameters extracted from Didi massive trajectory data. Then, the temporal Fuzzy C-Means (FCM) Clustering was used to classify road segments based on the 24-h emission rates, while Geographical Detector and MORAN’s I were introduced to verify the impact of built environment on line source emissions and the similarity of emissions generated from the nearby road segments. As a result, the spatial autoregressive moving average (SARMA) regression model was incorporated to assess the impact of selected built environment factors on the road segment emission rate based on the probabilistic results from FCM. It was found that short road length, being close to city center, high density of bus stations, more ramps nearby and high proportion of residential or commercial land would substantially increase the emission rate. Finally, the 24-h atmospheric NO₂ concentrations were obtained from the environmental monitor stations, to calculate the time variational trend by comparing with the line source traffic emissions, which to some extent explains the contribution of on-road traffic to the overall atmospheric pollution. Result of this study could guide urban planning, so as to avoid transportation related built environment attributes which may contribute to serious atmospheric environment pollutions.     

Assessing the importance of transportation activity data for urban emission inventories

The aim of this research is the implementation of a GPS-based modelling approach for improving the characterization of vehicle speed spatial variation within urban areas, and a comparison of the resulting emissions with a widely used approach to emission inventory compiling. The ultimate goal of this study is to evaluate and understand the importance of activity data for improving the road transport emission inventory in urban areas. For this purpose, three numerical tools, namely, (i) the microsimulation traffic model (VISSIM); (ii) the mesoscopic emissions model (TREM); and (iii) the air quality model (URBAIR), were linked and applied to a medium-sized European city (Aveiro, Portugal). As an alternative, traffic emissions based on a widely used approach are calculated by assuming a vehicle speed value according to driving mode. The detailed GPS-based modelling approach results in lower total road traffic emissions for the urban area (7.9, 5.4, 4.6 and 3.2% of the total PM10, NO_x, CO and VOC daily emissions, respectively). Moreover, an important variation of emissions was observed for all pollutants when analysing the magnitude of the 5th and 95th percentile emission values for the entire urban area, ranging from −15 to 49% for CO, −14 to 31% for VOC, −19 to 46% for NO_x and −22 to 52% for PM10. The proposed GPS-based approach reveals the benefits of addressing the spatial and temporal variability of the vehicle speed within urban areas in comparison with vehicle speed data aggregated by a driving mode, demonstrating its usefulness in quantifying and reducing the uncertainty of road transport inventories.     

Are HOV/eco-lanes a sustainable option to reducing emissions in a medium-sized European city?

Innovative traffic management measures are needed to reduce transportation-related emissions. While in Europe, road lane management has focused mainly on introduction of bus lanes, the conversion to High Occupancy Vehicles (HOV) and eco-lanes (lanes dedicated to vehicles running on alternative fuels) has not been studied comprehensively. The objectives of this research are to: (1) Develop an integrated microscopic modeling platform calibrated with real world data to assess both traffic and emissions impacts of future Traffic Management Strategies (TMS) in an urban area; (2) Evaluate the introduction of HOV/eco-lanes in three different types of roads, freeway, arterial and urban routes, in an European medium-sized city and its effects in terms of emissions and traffic performance. The methodology consists of three distinct phases: (a) Traffic and road inventory data collection; (b) Traffic and emissions simulation using an integrated platform of microscopic simulation; and (c) Evaluation of scenarios. For the baseline scenario, the statistical analysis shows valid results. The results show that HOV and eco-lanes in a medium European city are feasible, and when the Average Occupancy of Vehicles (AOV) increases, on freeways, the majority of vehicles can reduce their travel time (2%) with a positive impact in terms of total emissions (−38% NO_x, −39% HC, −43% CO and −37% CO₂). On urban and arterial corridors, the reduction in emissions could be achieved only if the AOV increases from 1.50 to 1.70 passengers/vehicle. Total emissions of the corridor with an AOV of 1.70 passengers/vehicle can be reduced up to 35–36% for the urban route while the values can be reduced by 36–39% for the arterial road. With the introduction of Hybrid Electric Vehicles (HEV) and Electric Vehicles (EV) it is possible to reduce emissions, although the introduction of eco-lanes did not show significant reductions in emissions. When both policies are simulated together, an emissions improvement is observed for the arterial route and for two of the scenarios.     

Examining the effects of the built environment and residential self-selection on commuting trips and the related CO2 emissions: An empirical study in Guangzhou,China

Numerous studies have established the link between the built environment and travel behavior. However, fewer studies have focused on environmental costs of travel (such as CO₂ emissions) with respect to residential self-selection. Combined with the application of TIQS (Travel Intelligent Query System), this study develops a structural equations model (SEM) to examine the effects of the built environment and residential self-selection on commuting trips and their related CO₂ emissions using data from 2015 in Guangzhou, China. The results demonstrate that the effect of residential self-selection also exists in Chinese cities, influencing residents’ choice of living environments and ultimately affecting their commute trip CO₂ emissions. After controlling for the effect of residential self-selection, built environment variables still have significant effects on CO₂ emissions from commuting although some are indirect effects that work through mediating variables (car ownership and commuting trip distance). Specifically, CO₂ emissions are negatively affected by land-use mix, residential density, metro station density and road network density. Conversely, bus stop density, distance to city centers and parking availability near the workplace have positive effects on CO₂ emissions. To promote low carbon travel, intervention on the built environment would be effective and necessary.     

Does urbanization lead to less energy use on road transport? Evidence from municipalities in Norway

The relationship between urbanization, energy use, and CO₂ emissions has been extensively studied in recent years, however little attention paid to the differences in urban forms. Previous studies implicitly assume that the urban form is homogenous across different urban areas. Such an assumption is questionable as urban form can have many different facets. This paper investigates the effects of urbanization on the road transport energy use by considering different urban forms from a dataset of 386 Norwegian municipalities from 2006 to 2009. Using the Stochastic Impacts by Regression on Population, Affluence, and Technology (STIRPAT) model with an energy use identity equation, the main findings (1) confirm the well-established result that urban density has a negative and significant influence on road transport energy use, and (2) demonstrate that the effect of urbanization partly depends on the level of urban density. These results imply that additional increases in urbanization in dense areas yield greater decreases in road transport energy use per capita. Additional findings posit that (3) there is a non-linear (quadratic) relationship between road energy use per capita and urban population. This implies that an increase in total municipality population over a specific turning point can result in a decrease in road energy use per capita. However, (4) the ratio of urban residential buildings with private gardens has a negative and significant influence on road transport energy use. This implies that there may be a trade-off between compact and sprawl city development strategies, highlighting that sustainable energy use requires further investigation.     

Urban form,commuting patterns and CO2 emissions: What differences between the municipality’s residents and its jobs?

This article investigates the links between urban form and commuting patterns, and the CO₂ emissions associated with them, in the municipalities that comprise the New Town of Marne-la-Vallée (NTMV) located in the Paris Region. The paper distinguishes between the commutes performed by residents and those generated by the jobs located in a municipality. The contribution of the paper is twofold. Firstly, it shows that the CO₂ emissions of commutes differ greatly depending on whether one considers residents or jobs: hence focusing on the travel behaviour of residents can lead to significant errors in the assessment of the CO₂ emissions generated by a municipality, and therefore its environmental sustainability. Secondly, the paper explores the relationship between commuting trips and several indicators of urban form: density, compactness, jobs-to-residents ratio, accessibility to public transport and distance from Paris. We highlight that high jobs-to-residents ratios tend to increase the proportion of jobs held by residents. Density and compactness are associated with more sustainable travel behaviour among residents, but not non-residents. Finally, the shape of the public transport system, which mainly connects the municipalities of the NTMV with Paris, tends to decrease the proportion of jobs held by residents, especially in the municipalities that are close to Paris, and does not allow non-residents, most of whom do not travel from Paris, to use public transport.     

Distributional effects of road pricing: Assessment of nine scenarios for Paris

The starting point of this paper is to consider that there is no general answer to the question of the equity of urban road pricing. We therefore simulate and compare the distributional effects on commuters of nine toll scenarios for Paris, assuming that utility is nonlinear in income. We show that the distributional pattern across income groups depends crucially on the level of traffic reduction induced by tolling. Stringent tolls are more favourable to low-income motorists. Equity effects also vary with toll design. Compared to a reference scenario which uniformly charges all motorists driving within Paris, an inbound cordon toll is detrimental to low-incomes. Conversely, granting a rebate to low CO₂ emission cars slightly improves their situation while an exemption for Paris residents is neutral. Surprisingly, it matters little for social equity whether toll revenues are allocated to all commuters or solely to public transport users.     

Simulating the air quality impacts of traffic calming schemes in a dense urban neighborhood

In this study, the effects of isolated traffic calming measures and area-wide calming schemes on air quality in a dense neighborhood were estimated using a combination of microscopic traffic simulation, emission, and dispersion modeling. Results indicated that traffic calming measures did not have as large an effect on nitrogen dioxide (NO₂) concentrations as the effect observed on nitrogen oxide (NO_x) emissions. Changes in emissions resulted in highly disproportional changes in pollutant levels due to daily meteorological conditions, road geometry and orientation with respect to the wind. Average NO₂ levels increased between 0.1% and 10% with respect to the base-case while changes in NO_x emissions varied between 5% and 160%. Moreover, higher wind speeds decreased NO₂ concentrations on both sides of the roadway. Among the traffic calming measures, speed bumps produced the highest increases in NO₂ levels.     

Network-wide traffic and environmental impacts of acceleration and deceleration among Eco-Driving Vehicles in different road configurations

Eco-Driving, a driver behaviour-based method, has featured in a number of national policy documents as part of CO₂ emission reduction or climate change strategies. This investigation comprises a detailed assessment of acceleration and deceleration in Eco-Driving Vehicles at different penetration levels in the vehicle fleet, under varying traffic composition and volume. The impacts of Eco-Driving on network-wide traffic and environmental performance at a number of speed-restricted road networks (30?km/h) is quantified using microsimulation. The results show that increasing levels of Eco-Driving in certain road networks result in significant environmental and traffic congestion detriments at the road network level in the presence of heavy traffic. Increases in CO₂ emissions of up to 18% were found. However, with the addition of vehicle-to-vehicle or vehicle-to-infrastructure communication technology which facilitates dynamic driving control on speed and acceleration/deceleration in vehicles, improvements in CO₂ emissions and traffic congestion are possible using Eco-Driving.     

Identifying transit deserts for low-income commuters in Wuhan Metropolitan Area,China

The rapid expansion of many Chinese cities has put increasing pressure on existing urban transportation systems. Using Baidu users’ location data, this research analyzes the spatial patterns of the transit systems and commuter flows in Wuhan Metropolitan Area, China, and identifies transit deserts affecting low-income commuters. The results show that, first, most transit demand are generated by trips between neighboring communities, while large transit supply tends to occur between distant communities in the region. Second, about 11.21% of low-income commuters are affected by transit deserts in Wuhan Metropolitan Area. In detail, 61.30% of them commute within the city centers and 36.06% of them commute within the suburbs. Only about 2.64% of them actually travel between city centers and suburbs. Third, for low-income suburban commuters, transit deserts occur when they are surrounded by low-density transit infrastructure and low-frequency transit services, which makes it very difficult for them to connect to rest of the region. However, for low-income commuters residing in the city centers, transit deserts are mainly caused by the large numbers of transit-dependent people competing for limited transit supply in the areas. This research explores the relationship between transit systems and commuting demand in a major Chinese metropolitan area. The findings could help guide future transit system planning in China and beyond.     

Policy packages for modal shift and CO2 reduction in Lille,France

This paper proposes different policy scenarios to cut CO₂ emissions caused by the urban mobility of passengers. More precisely, we compare the effects of the ‘direct tool’ of carbon tax, to a combination of ‘indirect tools’ – not originally aimed at reducing CO₂ (i.e. congestion charging, parking charges and a reduction in public transport travel time) in terms of CO₂ impacts through a change in the modal split. In our model, modal choices depend on individual characteristics, trip features (including the effects of policy tools), and land use at origin and destination zones. Personal “CO₂ emissions budgets” resulting from the trips observed in the metropolitan area of Lille (France) in 2006 are calculated and compared to the situation related to the different policy scenarios. We find that an increase of 50% in parking charges combined with a cordon toll of €1.20 and a 10% travel time decrease in public transport services (made after recycling toll-revenues) is the winning scenario. The combined effects of all the policy scenarios are superior to their separate effects.