道路清障车的制动过程分析

建立了道路清障车拖带车辆制动工况力学模型，绘制了道路清障车拖带车辆行驶时的制动器制动力分配曲线Ｉ，分析了被牵引车结构参数的改变对制动过程的影响，并建议对这种轴荷变化的道路清障车应安装感载阀，以提高制动稳定性。     

Self-tuning control algorithm design for vehicle adaptive cruise control system through real-time estimation of vehicle parameters and road grade

The main purpose of this paper is to design a self-tuning control algorithm for an adaptive cruise control (ACC) system that can adapt its behaviour to variations of vehicle dynamics and uncertain road grade. To this aim, short-time linear quadratic form (STLQF) estimation technique is developed so as to track simultaneously the trend of the time-varying parameters of vehicle longitudinal dynamics with a small delay. These parameters are vehicle mass, road grade and aerodynamic drag-area coefficient. Next, the values of estimated parameters are used to tune the throttle and brake control inputs and to regulate the throttle/brake switching logic that governs the throttle and brake switching. The performance of the designed STLQF-based self-tuning control (STLQF-STC) algorithm for ACC system is compared with the conventional method based on fixed control structure regarding the speed/distance tracking control modes. Simulation results show that the proposed control algorithm improves the performance of throttle and brake controllers, providing more comfort while travelling, enhancing driving safety and giving a satisfactory performance in the presence of different payloads and road grade variations.     

Feedback brake distribution control for minimum pitch

The distribution of brake forces between front and rear axles of a vehicle is typically specified such that the same level of brake force coefficient is imposed at both front and rear wheels. This condition is known as ‘ideal’ distribution and it is required to deliver the maximum vehicle deceleration and minimum braking distance. For subcritical braking conditions, the deceleration demand may be delivered by different distributions between front and rear braking forces. In this research we show how to obtain the optimal distribution which minimises the pitch angle of a vehicle and hence enhances driver subjective feel during braking. A vehicle model including suspension geometry features is adopted. The problem of the minimum pitch brake distribution for a varying deceleration level demand is solved by means of a model predictive control (MPC) technique. To address the problem of the undesirable pitch rebound caused by a full-stop of the vehicle, a second controller is designed and implemented independently from the braking distribution in use. An extended Kalman filter is designed for state estimation and implemented in a high fidelity environment together with the MPC strategy. The proposed solution is compared with the reference ‘ideal’ distribution as well as another previous feed-forward solution.     

Development of a rear-end collision avoidance system with automatic brake control

We have studied active safety technologies from the standpoint of “collision avoidance”. This paper describes a rear-end collision avoidance system with automatic brake control, which avoids a collision to the vehicle in front caused by inadvertent human errors using automatic emergency braking. The system is comprised of four key technological elements, headway distance measurement using scanning laser radar, path estimation algorithm with vehicle dynamics, collision prediction to the vehicle in front by a safe/danger decision algorithm, and longitudinal automatic brake control.     

某微型客车制动力分配优化设计

提出了M1类车辆空、满载制动力分配系数的计算公式.以理想制动力分配曲线与实际应用的两段不同斜率制动力分配线之间面积最小为优化目标,同时保证满载状况时的制动效率不小于75%,优化设计了某微型客车变比值的制动力分配曲线.考虑制动器推出压耗,建立了各轴制动力与管路液压的转化公式,由优化后的变比值制动力分配线确定了液压比例阀的特性曲线.对制动力分配曲线优化前、后的微型客车制动距离进行的对比计算表明,优化后的微型客车制动距离明显减小.     

Wheel slide protection control using a command map and Smith predictor for the pneumatic brake system of a railway vehicle

In railway vehicles, excessive sliding or wheel locking can occur while braking because of a temporarily degraded adhesion between the wheel and the rail caused by the contaminated or wet surface of the rail. It can damage the wheel tread and affect the performance of the brake system and the safety of the railway vehicle. To safeguard the wheelset from these phenomena, almost all railway vehicles are equipped with wheel slide protection (WSP) systems. In this study, a new WSP algorithm is proposed. The features of the proposed algorithm are the use of the target sliding speed, the determination of a command for WSP valves using command maps, and compensation for the time delay in pneumatic brake systems using the Smith predictor. The proposed WSP algorithm was verified using experiments with a hardware-in-the-loop simulation system including the hardware of the pneumatic brake system.     

Parallel model based fault detection algorithm for electronic parking brake system

This paper describes a parallel model-based fault detection algorithm for an electronic parking brake (EPB) system, which consists of an electronic control unit with built-in current sensor and braking force sensor. For the EPB system to supply sufficient parking force to a vehicle, the parking force sensor is of utmost importance. If a fault occurs in this sensor, sufficient parking force may not be supplied, thereby seriously threatening the safety of the vehicle. Thus, a fault detection method is required for the parking force sensor of the EPB system to improve the safety of vehicles. For this purpose, a highly reliable fault detection method is needed to detect abnormal fault signals, which cannot be detected by the existing on-line sensor monitoring fault detection methods. This paper proposes a novel parallel model-based fault detection algorithm for the EPB system, which compares the physical sensor data with the mathematical model, the fuzzy model, and the neural network model at the same time. In order to reduce false alarms, the magnitude of thresholds and the operation counts are changed adaptively. When the proposed parallel model-based fault detection algorithm detects severe failures of the force sensor, it warns the driver in advance to prevent accidents due to the failures. The proposed algorithm is verified by hardware-in-theloop simulations in various situations.     

Vehicle Dynamic Control for In-Wheel Electric Vehicles Via Temperature Consideration of Braking Systems

?Vehicle dynamic control (VDC) systems play an important role with regard to vehicle stability and safety when turning. VDC systems prevent vehicles from spinning or slipping when cornering sharply by controlling vehicle yaw moment, which is generated by braking forces. Thus, it is important to control braking forces depending on the driving conditions of the vehicle. The required yaw moment to stabilize a vehicle is calculated through optimal control and a combination of braking forces used to generate the calculated yaw moment. However, braking forces can change due to frictional coefficients being affected by variations in temperature. This can cause vehicles to experience stability problems due an improper yaw moment being applied to the vehicle. In this paper, a brake temperature estimator based on the finite different method (FDM) was proposed with a friction coefficient estimator in order to solve this problem. The developed braking characteristic estimation model was used to develop a VDC cooperative control algorithm using hydraulic braking and the regenerative braking of an in-wheel motor. Performance simulations of the developed cooperative control algorithm were performed through cosimulation with MATLAB/Simulink and CarSim. From the simulation results, it was verified that vehicle stability was ensured despite any changes in the braking characteristics due to brake temperatures.     

Modeling and control of an anti-lock brake and steering system for cooperative control on split-mu surfaces

The brake and steering systems in vehicles are the most effective actuators that directly affect the vehicle dynamics. In general, the brake system affects the longitudinal dynamics and the steering system affects the lateral dynamics; however, their effects are coupled when the vehicle is braking on a non-homogenous surface, such as a split-mu road. The yaw moment compensation of the steering control on a split-mu road is one of the basic functions of integrated or coordinated chassis control systems and has been demonstrated by several chassis suppliers. However, the disturbance yaw moment is generally compensated for using the yaw rate feedback or using wheel brake pressure measurement. Access to the wheel brake pressure through physical sensors is not cost effective; therefore, we modeled the hydraulic brake system to avoid using physical sensors and to estimate the brake pressure. The steering angle controller was designed to mitigate the non-symmetric braking force effect and to stabilize the yaw rate dynamics of the vehicle. An H-infinity design synthesis was used to take the system model and the estimation errors into account, and the designed controller was evaluated using vehicle tests.     

New procedure to estimate the brake warping in a roller tester

Vehicle systems such as the steering, brakes and suspension greatly influence vehicle safety. Therefore, these systems must be inspected to guarantee that they are functioning correctly and to certify that the vehicle is functioning at a satisfactory safety level. In disc brakes, warping is one of the principal reasons for vibrations and noise, and it contributes to diminished brake efficiency. Currently, the International Motor Vehicle Inspection Committee (CITA) demands disc brake warping inspections occur during periodic motor vehicle inspections (PMVIs); however, the procedure to carry out this inspection is not well defined. In this investigation, the warping phenomenon has been analyzed, and a new inspection procedure is proposed.     

制动减速度与制动响应时间的匹配设计及优化分析

制动减速度和制动响应时间作为商用车制动系统两项重要技术指标,直接影响车辆行车安全.本文通过对某款8×8车型的制动减速度与制动响应时间进行匹配设计、测试分析及设计优化,最终使制动减速度达到理想状态,制动响应时间大幅缩短,制动性能得到了大幅提升,进一步提高了整车的安全性.     

基于理想制动力分配曲线的复合制动设计

以理想制动力分配曲线为目标,在车辆液压制动力分配系数保持不变的情况下,研究了前后液压制动力和再生制动力分配的比例关系,确定了制动力分配控制策略;在确保液压制动力分配系数满足法规要求的情况下,以最优制动力分配为目标优化了整车结构参数。     

Direct tire force generation algorithm based on non-iterative nonlinear inverse tire model

The function of vehicle dynamics control system is adjusting the yaw moment, the longitudinal force and lateral force of a vehicle body through several chassis systems, such as brakes, steering and suspension. Individual systems such as ESC, AFS and 4WD can be used to achieve desired performance by controlling actuator variables. However, integrated chassis control systems that have multiple objectives may not simply achieve the desired performance by controlling the actuators directly. Usually those systems determine the required tire forces in an upper level controller and a lower level controller regulates the tire forces through the actuators. The tire force is controlled in a recursive way based on vehicle state measurement, which may not be sufficient for fast response. For immediate force tracking, we introduce a direct tire force generation method that uses a nonlinear inverse tire model, a pseudo-inverse model of vehicle dynamics and the relationship between longitudinal force and brake pressure.     

Robust control of anti-lock brake system

A robust control algorithm for an anti-lock brake system is proposed. The method used is based on static-state feedback of longitudinal slip and does not involve controller scheduling with changing vehicle speed or road adhesion coefficient estimation. An improvement involving scheduling of longitudinal slip reference with longitudinal acceleration measurement is included. Electromechanical braking actuators are used in simulations, and the algorithm used in this study is shown to have high performance on roads with constant and varying adhesion coefficients, displaying nice robustness properties against large vehicle speed and road adhesion coefficient variations. Guidelines are provided for tuning controller gains to cope with unknown actuator delay and measurement noise.     

多轴分布式电驱动车辆电液复合制动控制研究

针对多轴分布式电机驱动车辆电液复合制动中易出现的车辆制动抖动问题,提出了一种建压阶段电机制动力修正策略和一种基于前馈-反馈的协调控制策略,分别在建压阶段和其他阶段通过协调复合制动力来解决制动抖动的问题。针对防抱死控制系统与电机制动系统共同作用时的制动矛盾,提出了一种基于PID 控制的ABS控制策略,主要通过改变电机制动力来解决制动矛盾的问题。通过TruckSim、Matlab/Simulink及AMESim联合仿真验证,制动冲击度在建压阶段下降了 20.66%,在电机退出阶段下降了 92.59%,驾驶感觉得到明显改善。而 ABS控制策略也可在保证理想滑移率的同时完成制动能量回收;结合整车制动试验,表明协调控制策略在保证制动效果良好的同时实现了制动能量回收,效果显著。     

eTS fuzzy driver model for simultaneous longitudinal and lateral vehicle control

In this paper, evolving Takagi-Sugeno (eTS) fuzzy driver model is proposed for simultaneous lateral and longitudinal control of a vehicle in a test track closed to traffic. The developed eTS fuzzy driver model can capture human operator’s driving expertise for generating desired steering angle, throttle angle and brake pedal command values by processing only information which can be supplied by the vehicle’s on-board control systems in real time. Apart from other fuzzy rule based (FRB) models requiring human expert knowledge or off-line clustering, the developed eTS driver model can adapt itself automatically, even ‘from scratch’, by an on-line learning process using eTS algorithm while human driver is supervising the vehicle. Proposed eTS fuzzy driver model’s on-line human driver identification capability and autonomous vehicle driving performance were evaluated on real road profiles created by digitizing two different intercity express ways of Turkey in IPG© CarMaker® software. The training and validation simulation results demonstrated that eTS fuzzy driver model can be used in product development phase to speed up different tests via realistic simulations. Furthermore eTS fuzzy driver model has an application potential in the field of autonomous driving.     

基于典型道路谱的汽车制动摩擦片寿命预测

文章基于能量磨损机理提出了一种汽车制动摩擦片磨损寿命预测的方法,对车辆制动安全性以及摩擦材料利用率的提升具有一定的现实意义。以车辆制动系统中的摩擦片为研究对象,在制动盘冷却试验基础上建立制动摩擦副热力学模型,旨在探明不同工况下摩擦副热力学特征的变化规律。根据能量磨损机理研究制动温度对材料磨损量的影响关系,结合温度分布特征与摩擦材料磨损率提出摩擦片磨损量的评价标准,建立制动摩擦片的磨损寿命预测模型。基于典型公路道路试验路谱的动力学参数进行摩擦片磨损寿命预测,与试验结果相比其磨损寿命预测具有较好的一致性,为汽车制动系统参数设计及制动摩擦材料寿命研究提供了指导依据。     

基于模糊PID控制的汽车防抱制动系统控制算法研究

提出一种基于模糊PID控制的防抱制动系统控制方式。针对简化的汽车纵向双轮模型,设计了模糊PID控制器,讨论了模糊 PID控制切换参数的选取,并具体介绍了模糊控制器的设计。仿真对比试验验证了模糊PID控制性能优于单一的PID控制和模糊控制。     

驾驶机器人车辆动态制动力矩补偿

为了减小长期自动驾驶过程中制动性能下降带来的影响,提出了一种驾驶机器人车辆动态制动力矩补偿方法。首先建立了以车速和制动踏板力为输入,制动力矩为输出的驾驶机器人车辆制动性能离线自学习模型。然后考虑到驾驶机器人车辆长期自动驾驶导致离线自学习模型可靠性下降,建立了以车速和制动踏板力为输入,制动力矩为输出的扩展自回归在线辨识模型,并采用模糊变遗忘因子递推最小二乘法进行参数辨识。模糊变遗忘因子递推最小二乘法通过引入遗忘因子的方式,对数据施加时变加权系数,以避免出现数据增长导致的数据饱和现象。模糊变遗忘因子控制器以制动力矩辨识误差为输入,经模糊规则推理实时输出合适的遗忘因子进行参数辨识,能够有效均衡驾驶机器人车辆制动性能参数辨识的稳定性与收敛速度。驾驶机器人车辆自动驾驶过程中,根据当前车速与目标车速的大小计算出所需的制动力矩,加上反馈回来的制动力矩误差,并结合当前时刻的车速,利用制动性能离线自学习模型与机械腿逆向运动学模型实时计算出制动电机输出位移量,实现对驾驶机器人车辆制动力矩的在线补偿。仿真与试验结果表明:利用所提出的方法对车辆动态制动力矩进行辨识时,通过调节遗忘因子,辨识结果能够快速收敛且辨识误差较小。在此基础上,控制驾驶机器人车辆进行纵向车速跟踪时,能够有效减小制动性能下降造成的影响,保证控制车速跟踪误差在±1km·h-1之内。     

A Versatile Flat Track Tire Testing Machine

Summary A flat track tire testing machine developed by the IMMa group is described. It permits the simulation and study of the dynamic behavior of a great variety of tires under controllable and repetitive highly dynamic realistic working conditions in the laboratory for a diversity of vehicles, from motorcycles to light trucks. The machine incorporates: – a hydraulically operated tire support and loading system with wide operating ranges; – a computer controlled brake system to simulate braking maneuvers with ABS systems; – a complete sensorial system; – a data acquisition and control system continually monitoring and acting on the experimental variables, i.e., tire and belt speed, longitudinal slip, slip and camber angles, tire pressure, tire normal force, etc. As an application example, results are presented that adjust the parameter of the magic formula for a standard 175/70 R14 passenger vehicle tire. Accurate mathematical tire models are recognized as essential for the prediction of vehicle dynamic performances using simulation tools.