Enhanced cooperative car-following traffic model with the combination of V2V and V2I communication

Vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) communication are emerging components of intelligent transport systems (ITS) based on which vehicles can drive in a cooperative way and, hence, significantly improve traffic flow efficiency. However, due to the high vehicle mobility, the unreliable vehicular communications such as packet loss and transmission delay can impair the performance of the cooperative driving system (CDS). In addition, the downstream traffic information collected by roadside sensors in the V2I communication may introduce measurement errors, which also affect the performance of the CDS. The goal of this paper is to bridge the gap between traffic flow modelling and communication approaches in order to build up better cooperative traffic systems. To this end, we aim to develop an enhanced cooperative microscopic (car-following) traffic model considering V2V and V2I communication (or V2X for short), and investigate how vehicular communications affect the vehicle cooperative driving, especially in traffic disturbance scenarios. For these purposes, we design a novel consensus-based vehicle control algorithm for the CDS, in which not only the local traffic flow stability is guaranteed, but also the shock waves are supposed to be smoothed. The IEEE 802.11p, the defacto vehicular networking standard, is selected as the communication protocols, and the roadside sensors are deployed to collect the average speed in the targeted area as the downstream traffic reference. Specifically, the imperfections of vehicular communication as well as the measured information noise are taken into account. Numerical results show the efficiency of the proposed scheme. This paper attempts to theoretically investigate the relationship between vehicular communications and cooperative driving, which is needed for the future deployment of both connected vehicles and infrastructure (i.e. V2X).     

Distributed MPC for cooperative highway driving and energy-economy validation via microscopic simulations

Traffic congestion and energy issues have set a high bar for current ground transportation systems. With advances in vehicular communication technologies, collaborations of connected vehicles have becoming a fundamental block to build automated highway transportation systems of high efficiency. This paper presents a distributed optimal control scheme that takes into account macroscopic traffic management and microscopic vehicle dynamics to achieve efficiently cooperative highway driving. Critical traffic information beyond the scope of human perception is obtained from connected vehicles downstream to establish necessary traffic management mitigating congestion. With backpropagating traffic management advice, a connected vehicle having an adjustment intention exchanges control-oriented information with immediately connected neighbors to establish potential cooperation consensus, and to generate cooperative control actions. To achieve this goal, a distributed model predictive control (DMPC) scheme is developed accounting for driving safety and efficiency. By coupling the states of collaborators in the optimization index, connected vehicles achieve fundamental highway maneuvers cooperatively and optimally. The performance of the distributed control scheme and the energy-saving potential of conducting such cooperation are tested in a mixed highway traffic environment by the means of microscopic simulations.     

An ontological model to support communications of situation-aware vehicles

In an Intelligent Transport System (ITS) environment, the communication component is of great importance to support interactions between vehicles and roadside infrastructure. Previous studies have focused on the physical capability and capacity of the communication technologies, but the equally important development of suitable and efficient semantic content for transmission received notably less attention. Ontology is one promising approach for context modelling in ubiquitous computing environments, and in the transport domain it can be used both for context modelling and semantic contents for vehicular communications. This paper explores the development of an ontological model implementing relative geo-semantic information messages to support vehicle-to-vehicle communications. The proposed ontology model contains classes, objects, their properties/relations as well as some functions and query templates to represent and update the information of dynamic vehicles, inter-vehicle interactions and behaviour. This model was developed through a scenario enabling the evaluation of traffic conflict resolution approaches, by implementing a set of decision-making processes for intelligent vehicles. Given the scope of the proposed ontology modelling, it shows how vehicular communications can be used to update each vehicle’s context model. This work can be easily extended for more complex interactions among vehicles and the infrastructure.     

A control theoretic formulation of green driving strategies based on inter-vehicle communications

Various green driving strategies have been proposed to smooth traffic flow and lower pollutant emissions and fuel consumption in stop-and-go traffic. In this paper, we present a control theoretic formulation of distributed, cooperative green driving strategies based on inter-vehicle communications (IVCs). The control variable is the advisory speed limit, which is designed to smooth a following vehicle’s speed profile without changing its average speed. We theoretically analyze the performance of a constant independent and three simple cooperative green driving strategies and present three rules for effective and robust strategies. We then develop a distributed cooperative green driving strategy, in which the advisory speed limit is first independently calculated by each individual vehicle and then averaged among green driving vehicles through IVC. By simulations with Newell’s car-following model and the Comprehensive Modal Emissions Model (CMEM), we demonstrate that such a strategy is effective and robust independently as well as cooperatively for different market penetration rates of IVC-equipped vehicles and communication delays. In particular, even when 5% of the vehicles implement the green driving strategy and the IVC communication delay is 60 s, the fuel consumption can be reduced by up to 15%. Finally we discuss some future extensions.     

Field tests of a dynamic green driving strategy based on inter-vehicle communication

This paper presents the design and results for field tests regarding the environmental benefits in stop-and-go traffic of an algorithmic green driving strategy based on inter-vehicle communication (IVC), which was proposed in Yang and Jin (2014). The green driving strategy dynamically calculates advisory speed limits for vehicles equipped with IVC devices so as to smooth their speed profiles and reduce their emissions and fuel consumption. For the field tests, we develop a smartphone-based IVC system, in which vehicles’ speeds and locations are collected by GPS and accelerometer sensors embedded in smartphones, and communications among vehicles are enabled by specially designed smartphone applications, a central server, and 4G cellular networks. Six field tests are carried out on an uninterrupted ring road under slow or fast stop-and-go traffic conditions. We compare the performances of three alternatives: no green driving, heuristic green driving, and the IVC-based algorithmic green driving. Results show that heuristic green driving has better smoothing and environmental effects than no green driving, but the IVC-based algorithmic green driving outperforms both. In the future, we are interested in field tests under more realistic traffic conditions.     

Modeling lane-changing behavior in a connected environment: A game theory approach

Vehicle-to-Vehicle communications provide the opportunity to create an internet of cars through the recent advances in communication technologies, processing power, and sensing technologies. A connected vehicle receives real-time information from surrounding vehicles; such information can improve drivers’ awareness about their surrounding traffic condition and lead to safer and more efficient driving maneuvers. Lane-changing behavior, as one of the most challenging driving maneuvers to understand and to predict, and a major source of congestion and collisions, can benefit from this additional information. This paper presents a lane-changing model based on a game-theoretical approach that endogenously accounts for the flow of information in a connected vehicular environment. A calibration approach based on the method of simulated moments is presented and a simplified version of the proposed framework is calibrated against NGSIM data. The prediction capability of the simplified model is validated. It is concluded the presented framework is capable of predicting lane-changing behavior with limitations that still need to be addressed. Finally, a simulation framework based on the fictitious play is proposed. The simulation results revealed that the presented lane-changing model provides a greater level of realism than a basic gap-acceptance model.     

Special issue on intelligent transportation systems,big data and intelligent technology

ABSTRACT

Based on the increasing demands of transportation development, the concept of an Intelligent Transportation System (ITS) has received increasing attention in both academic and industry arenas. It integrates information, communications, computers and other technologies, and applies them in the field of transportation to build an integrated system of people, roads and vehicles by utilizing advanced data communication technologies. It can establish a large, fully functioning, real-time, accurate and efficient transportation management system. Intelligent transportation systems shift the focus from road managers to road users. In order to achieve this purpose, intelligent transportation systems use advanced technology to provide drivers with convenient information to help reduce traffic congestion and to increase available road capacity. This special issue is dedicated to exploring the most recent advances in intelligent transportation systems and big data based on intelligent technology.     

Experimental evaluation of CAM and DENM messaging services in vehicular communications

The Cooperative Awareness Basic Service and Decentralized Environmental Notification Basic Service have been standardized by the European Telecommunications Standards Institute (ETSI) to support vehicular safety and traffic efficiency applications needing continuous status information about surrounding vehicles and asynchronous notification of events, respectively. These standard specifications detail not only the packet formats for both the Cooperative Awareness Message (CAM) and Decentralized Environmental Notification Message (DENM), but also the general message dissemination rules. These basic services, also known as facilities, have been developed as part of a set of standards in which both ISO and ETSI describe the Reference Communication Architecture for future Intelligent Transportation Systems (ITS). By using a communications stack that instantiates this reference architecture, this paper puts in practice the usage of both facilities in a real vehicular scenario. This research work details implementation decisions and evaluates the performance of CAM and DENM facilities through a experimental testbed deployed in a semi-urban environment that uses IEEE 802.11p (ETSI G5-compliant), which is a WiFi-like communication technology conceived for vehicular communications. On the one hand, this validation considers the development of two ITS applications using CAM and DENM functionalities for tracking vehicles and disseminating traffic incidences. In this case, CAM and DENM have demonstrated to be able to offer all the necessary functionality for the study case. On the other hand, both facilities have been also validated in a extensive testing campaign in order to analyze the influence in CAM and DENM performance of aspects such as vehicle speed, signal quality or message dissemination rules. In these tests, the line of sight, equipment installation point and hardware capabilities, have been found as key variables in the network performance, while the vehicle speed has implied a slight impact.     

Influence of connected and autonomous vehicles on traffic flow stability and throughput

The introduction of connected and autonomous vehicles will bring changes to the highway driving environment. Connected vehicle technology provides real-time information about the surrounding traffic condition and the traffic management center’s decisions. Such information is expected to improve drivers’ efficiency, response, and comfort while enhancing safety and mobility. Connected vehicle technology can also further increase efficiency and reliability of autonomous vehicles, though these vehicles could be operated solely with their on-board sensors, without communication. While several studies have examined the possible effects of connected and autonomous vehicles on the driving environment, most of the modeling approaches in the literature do not distinguish between connectivity and automation, leaving many questions unanswered regarding the implications of different contemplated deployment scenarios. There is need for a comprehensive acceleration framework that distinguishes between these two technologies while modeling the new connected environment. This study presents a framework that utilizes different models with technology-appropriate assumptions to simulate different vehicle types with distinct communication capabilities. The stability analysis of the resulting traffic stream behavior using this framework is presented for different market penetration rates of connected and autonomous vehicles. The analysis reveals that connected and autonomous vehicles can improve string stability. Moreover, automation is found to be more effective in preventing shockwave formation and propagation under the model’s assumptions. In addition to stability, the effects of these technologies on throughput are explored, suggesting substantial potential throughput increases under certain penetration scenarios.     

Instantaneous multihop connectivity of one-dimensional vehicular ad hoc networks with general distributions of communication nodes

Connected and automated vehicle technologies hold great promises for improving the safety, efficiency, and environmental impacts of the transportation sector. In this study we are concerned with multihop connectivity of instantaneous vehicular one-dimensional ad hoc networks (VANETs) formed by connected vehicles along a communication path in a road network with given either vehicle locations or traffic densities, market penetration rates, and transmission ranges. We first define a new random variable for the location of the end node of a communication chain, which is a discrete random variable with given vehicle locations and a mixed random variable with given traffic densities. Then recursive, iterative, or differential equation models of instantaneous multihop connectivity between two communication nodes are derived from the relationships between end node probability mass or density function and connectivity. Assuming a simple communication model, the new models are applicable for general distribution patterns of vehicles and communication nodes, including non-evenly placed vehicles and nonhomogeneous Poisson distributions of nodes. With given vehicle locations, the computational cost for this new model is linear to the number of vehicles; with given traffic densities, we derive a new closed-form connectivity model for homogeneous Poisson distributions of communication nodes and an approximate closed-form model when distribution patterns of communication nodes are given by spatial renewal processes. We then apply the models to evaluate impacts on connectivity of traffic patterns, including shock waves, and road-side stations. The connectivity model could be helpful for designing routing protocols in VANETs and developing their applications in transportation systems.     

Definition of a merging assistant strategy using intelligent vehicles

In the area of active traffic management, new technologies provide opportunities to improve the use of current infrastructure. Vehicles equipped with in-car communication systems are capable of exchanging messages with the infrastructure and other vehicles. This new capability offers many opportunities for traffic management. This paper presents a novel merging assistant strategy that exploits the communication capabilities of intelligent vehicles. The proposed control requires the cooperation of equipped vehicles on the main carriageway in order to create merging gaps for on-ramp vehicles released by a traffic light. The aim is to reduce disruptions to the traffic flow created by the merging vehicles. This paper focuses on the analytical formulation of the control algorithm, and the traffic flow theories used to define the strategy. The dynamics of the gap formation derived from theoretical considerations are validated using a microscopic simulation. The validation indicates that the control strategy mostly developed from macroscopic theory well approximates microscopic traffic behaviour. The results present encouraging capabilities of the system. The size and frequency of the gaps created on the main carriageway, and the space and time required for their creation are compatible with a real deployment of the system. Finally, we summarise the results of a previous study showing that the proposed merging strategy reduces the occurrence of congestion and the number of late-merging vehicles. This innovative control strategy shows the potential of using intelligent vehicles for facilitating the merging manoeuvre through use of emerging communications technologies.     

Vehicular Ad-Hoc Networks sampling protocols for traffic monitoring and incident detection in Intelligent Transportation Systems

Vehicular Ad-Hoc Networks (VANETs) are an emerging technology soon to be brought to everyday life. Many Intelligent Transport Systems (ITS) services that are nowadays performed with expensive infrastructure, like reliable traffic monitoring and car accident detection, can be enhanced and even entirely provided through this technology. In this paper, we propose and assess how to use VANETs for collecting vehicular traffic measurements. We provide two VANET sampling protocols, named SAME and TOME, and we design and implement an application for one of them, to perform real time incident detection. The proposed framework is validated through simulations of both vehicular micro-mobility and communications on the 68 km highway that surrounds Rome, Italy. Vehicular traffic is generated based on a large real GPS traces set measured on the same highway, involving about ten thousand vehicles over many days. We show that the sampling monitoring protocol, SAME, collects data in few seconds with relative errors less than 10%, whereas the exhaustive protocol TOME allows almost fully accurate estimates within few tens of seconds. We also investigate the effect of a limited deployment of the VANET technology on board of vehicles. Both traffic monitoring and incident detection are shown to still be feasible with just 50% of equipped vehicles.     

Experimental validation of connected automated vehicle design among human-driven vehicles

In this paper, we present results regarding the experimental validation of connected automated vehicle design. In order for a connected automated vehicle to integrate well with human-dominated traffic, we propose a class of connected cruise control algorithms with feedback structure originated from human driving behavior. We test the connected cruise controllers using real vehicles under several driving scenarios while utilizing beyond-line-of-sight motion information obtained from neighboring human-driven vehicles via vehicle-to-everything (V2X) communication. We experimentally show that the design is robust against variations in human behavior as well as changes in the topology of the communication network. We demonstrate that both safety and energy efficiency can be significantly improved for the connected automated vehicle as well as for the neighboring human-driven vehicles and that the connected automated vehicle may bring additional societal benefits by mitigating traffic waves.     

Mobility and environment improvement of signalized networks through Vehicle-to-Infrastructure (V2I) communications

Traffic signals, even though crucial for safe operations of busy intersections, are one of the leading causes of travel delays in urban settings, as well as the reason why billions of gallons of fuel are burned, and tons of toxic pollutants released to the atmosphere each year by idling engines. Recent advances in cellular networks and dedicated short-range communications make Vehicle-to-Infrastructure (V2I) communications a reality, as individual cars and traffic signals can now be equipped with communication and computing devices. In this paper, we first presented an integrated simulator with V2I, a car-following model and an emission model to simulate the behavior of vehicles at signalized intersections and calculate travel delays in queues, vehicle emissions, and fuel consumption. We then present a hierarchical green driving strategy based on feedback control to smooth stop-and-go traffic in signalized networks, where signals can disseminate traffic signal information and loop detector data to connected vehicles through V2I communications. In this strategy, the control variable is an individual advisory speed limit for each equipped vehicle, which is calculated from its location, signal settings, and traffic conditions. Finally, we quantify the mobility and environment improvements of the green driving strategy with respect to market penetration rates of equipped vehicles, traffic conditions, communication characteristics, location accuracy, and the car-following model itself, both in isolated and non-isolated intersections. In particular, we demonstrate savings of around 15% in travel delays and around 8% in fuel consumption and greenhouse gas emissions. Different from many existing ecodriving strategies in signalized road networks, where vehicles’ speed profiles are totally controlled, our strategy is hierarchical, since only the speed limit is provided, and vehicles still have to follow their leaders. Such a strategy is crucial for maintaining safety with mixed vehicles.     

Energy saving potentials of connected and automated vehicles

Connected and automated vehicles (CAV) are marketed for their increased safety, driving comfort, and time saving potential. With much easier access to information, increased processing power, and precision control, they also offer unprecedented opportunities for energy efficient driving. This paper is an attempt to highlight the energy saving potential of connected and automated vehicles based on first principles of motion, optimal control theory, and a review of the vast but scattered eco-driving literature. We explain that connectivity to other vehicles and infrastructure allows better anticipation of upcoming events, such as hills, curves, slow traffic, state of traffic signals, and movement of neighboring vehicles. Automation allows vehicles to adjust their motion more precisely in anticipation of upcoming events, and save energy. Opportunities for cooperative driving could further increase energy efficiency of a group of vehicles by allowing them to move in a coordinated manner. Energy efficient motion of connected and automated vehicles could have a harmonizing effect on mixed traffic, leading to additional energy savings for neighboring vehicles.     

A platoon based cooperative eco-driving model for mixed automated and human-driven vehicles at a signalised intersection

The advancements in communication and sensing technologies can be exploited to assist the drivers in making better decisions. In this paper, we consider the design of a real-time cooperative eco-driving strategy for a group of vehicles with mixed automated vehicles (AVs) and human-driven vehicles (HVs). The lead vehicles in the platoon can receive the signal phase and timing information via vehicle-to-infrastructure (V2I) communication and the traffic states of both the preceding vehicle and current platoon via vehicle-to-vehicle (V2V) communication. We propose a receding horizon model predictive control (MPC) method to minimise the fuel consumption for platoons and drive the platoons to pass the intersection on a green phase. The method is then extended to dynamic platoon splitting and merging rules for cooperation among AVs and HVs in response to the high variation in urban traffic flow. Extensive simulation tests are also conducted to demonstrate the performance of the model in various conditions in the mixed traffic flow and different penetration rates of AVs. Our model shows that the cooperation between AVs and HVs can further smooth out the trajectory of the latter and reduce the fuel consumption of the entire traffic system, especially for the low penetration of AVs. It is noteworthy that the proposed model does not compromise the traffic efficiency and the driving comfort while achieving the eco-driving strategy.     

Vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) communication in a heterogeneous wireless network – Performance evaluation

Connected Vehicle Technology (CVT) requires wireless data transmission between vehicles (V2V), and vehicle-to-infrastructure (V2I). Evaluating the performance of different network options for V2V and V2I communication that ensure optimal utilization of resources is a prerequisite when designing and developing robust wireless networks for CVT applications. Though dedicated short range communication (DSRC) has been considered as the primary communication option for CVT safety applications, the use of other wireless technologies (e.g., Wi-Fi, LTE, WiMAX) allow longer range communications and throughput requirements that could not be supported by DSRC alone. Further, the use of other wireless technology potentially reduces the need for costly DSRC infrastructure. In this research, the authors evaluated the performance of Het-Net consisting of Wi-Fi, DSRC and LTE technologies for V2V and V2I communications. An application layer handoff method was developed to enable Het-Net communication for two CVT applications: traffic data collection, and forward collision warning. The handoff method ensures the optimal utilization of available communication options (i.e., eliminate the need of using multiple communication options at the same time) and corresponding backhaul communication infrastructure depending on the connected vehicle application requirements. Field studies conducted in this research demonstrated that the use of Het-Net broadened the range and coverage of V2V and V2I communications. The use of the application layer handoff technique to maintain seamless connectivity for CVT applications was also successfully demonstrated and can be adopted in future Het-Net supported connected vehicle applications. A long handoff time was observed when the application switches from LTE to Wi-Fi. The delay is largely due to the time required to activate the 802.11 link and the time required for the vehicle to associate with the RSU (i.e., access point). Modifying the application to implement a soft handoff where a new network is seamlessly connected before breaking from the existing network can greatly reduce (or eliminate) the interruption of network service observed by the application. However, the use of a Het-Net did not compromise the performance of the traffic data collection application as this application does not require very low latency, unlike connected vehicle safety applications. Field tests revealed that the handoff between networks in Het-Net required several seconds (i.e., higher than 200 ms required for safety applications). Thus, Het-Net could not be used to support safety applications that require communication latency less than 200 ms. However, Het-Net could provide additional/supplementary connectivity for safety applications to warn vehicles upstream to take proactive actions to avoid problem locations. To validate and establish the findings from field tests that included a limited number of connected vehicles, ns-3 simulation experiments with a larger number of connected vehicles were conducted involving a DSRC and LTE Het-Net scenario. The latency and packet delivery error trend obtained from ns-3 simulation were found to be similar to the field experiment results.     

Required navigation performance for connected and autonomous vehicles: where are we now and where are we going?

ABSTRACT

While automotive original equipment manufacturers and IT companies are developing and demonstrating self-driving cars, true autonomy will not be realised in the near future due in part to the technology readiness level of the existing systems as well as issues of ethics, security, governance and standards surrounding the implementation of autonomy for road transport. However, advances in cellular phones and networks, satellite-based positioning and communications, cloud computing, combined with a rise in the volumes of available data, allied with a reduction in their costs, offer the very real possibility of connecting vehicles, one to another and to smart city infrastructure as part of the Internet of Things (IoT). Data from connected vehicles, when combined with other information, may provide valuable intelligence to traffic managers and other stakeholders via cooperative intelligent transport system (C-ITS) platforms. Nevertheless, many issues face the implementation of a truly connected IoT in general and C-ITS in particular.     

Intelligent transport systems solutions in transitional countries: The case of Korea

Transport policy in Korea is driven by the need to cope with ever-worsening traffic conditions. The development of an intelligent transport systems (ITS) Master Plan for Korea is of particular interest and demonstrates the heavy reliance placed on ITS measures to facilitate both the management of congested (but expanding) highway networks and to encourage a shift to greater use of public transport. The paper highlights the major achievements of ITS in Korea by assessing the evidence provided by the widespread implementation of ITS technologies (such as the creation of 'showcase' demonstrations). Some observations from the implementation of ITS in (so-called) transitional economies are presented.     

Analysis of a cooperative variable speed limit system using microscopic traffic simulation

Variable speed limit systems where variable message signs are used to show speed limits adjusted to the prevailing road or traffic conditions are installed on motorways in many countries. The objectives of variable speed limit system installations are often to decrease the number of accidents and to increase traffic efficiency. Currently, there is an interest in exploring the potential of cooperative intelligent transport systems including communication between vehicles and/or vehicles and the infrastructure. In this paper, we study the potential benefits of introducing infrastructure to vehicle communication, autonomous vehicle control and individualized speed limits in variable speed limit systems. We do this by proposing a cooperative variable speed limit system as an extension of an existing variable speed limit system. In the proposed system, communication between the infrastructure and the vehicles is used to transmit variable speed limits to upstream vehicles before the variable message signs become visible to the drivers. The system is evaluated by the means of microscopic traffic simulation. Traffic efficiency and environmental effects are considered in the analysis. The results of the study show benefits of the infrastructure to vehicle communication, autonomous vehicle control and individualized speed limits for variable speed limit systems in the form of lower acceleration rates and thereby harmonized traffic flow and reduced exhaust emissions.