An agent-based approach to modelling driver route choice behaviour under the influence of real-time information

This paper presents an agent-based approach to modelling individual driver behaviour under the influence of real-time traffic information. The driver behaviour models developed in this study are based on a behavioural survey of drivers which was conducted on a congested commuting corridor in Brisbane, Australia. Commuters’ responses to travel information were analysed and a number of discrete choice models were developed to determine the factors influencing drivers’ behaviour and their propensity to change route and adjust travel patterns. Based on the results obtained from the behavioural survey, the agent behaviour parameters which define driver characteristics, knowledge and preferences were identified and their values determined. A case study implementing a simple agent-based route choice decision model within a microscopic traffic simulation tool is also presented. Driver-vehicle units (DVUs) were modelled as autonomous software components that can each be assigned a set of goals to achieve and a database of knowledge comprising certain beliefs, intentions and preferences concerning the driving task. Each DVU provided route choice decision-making capabilities, based on perception of its environment, that were similar to the described intentions of the driver it represented. The case study clearly demonstrated the feasibility of the approach and the potential to develop more complex driver behavioural dynamics based on the belief–desire–intention agent architecture.     

Potential benefits of an adaptive forward collision warning system

Forward collision warning (FCW) systems can reduce rear-end vehicle collisions. However, if the presentation of warnings is perceived as mistimed, trust in the system is diminished and drivers become less likely to respond appropriately. In this driving simulator investigation, 45 drivers experienced two FCW systems: a non-adaptive and an adaptive FCW that adjusted the timing of its alarms according to each individual driver’s reaction time. Whilst all drivers benefited in terms of improved safety from both FCW systems, non-aggressive drivers (low sensation seeking, long followers) did not display a preference to the adaptive FCW over its non-adaptive equivalent. Furthermore, there was little evidence to suggest that the non-aggressive drivers’ performance differed with either system. Benefits of the adaptive system were demonstrated for aggressive drivers (high sensation seeking, short followers). Even though both systems reduced their likelihood of a crash to a similar extent, the aggressive drivers rated each FCW more poorly than their non-aggressive contemporaries. However, this group, with their greater risk of involvement in rear-end collisions, reported a preference for the adaptive system as they found it less irritating and stress-inducing. Achieving greater acceptance and hence likely use of a real system is fundamental to good quality FCW design.     

Energy and emissions impacts of a freeway-based dynamic eco-driving system

Surface transportation consumes a vast quantity of fuel and accounts for about a third of the US CO₂ emissions. In addition to the use of more fuel-efficient vehicles and carbon-neutral alternative fuels, fuel consumption and CO₂ emissions can be lowered through a variety of strategies that reduce congestion, smooth traffic flow, and reduce excessive vehicle speeds. Eco-driving is one such strategy. It typically consists of changing a person’s driving behavior by providing general static advice to the driver (e.g. do not accelerate too quickly, reduce speeds, etc.). In this study, we investigate the concept of dynamic eco-driving, where advice is given in real-time to drivers changing traffic conditions in the vehicle’s vicinity. This dynamic strategy takes advantage of real-time traffic sensing and telematics, allowing for a traffic management system to monitor traffic speed, density, and flow, and then communicates advice in real-time back to the vehicles. By providing dynamic advice to drivers, approximately 10–20% in fuel savings and lower CO₂ emissions are possible without a significant increase in travel time. Based on simulations, it was found that in general, higher percentage reductions in fuel consumption and CO₂ emission occur during severe compared to less congested scenarios. Real-world experiments have also been carried out, showing similar reductions but to a slightly smaller degree.     

Evaluation of the effect of cooperative infrastructure-to-vehicle systems on driver behavior

In-vehicle technologies and co-operative services have potential to ease congestion problems and improve traffic safety. This paper investigates the impact of infrastructure-to-vehicle co-operative systems, case of CO-OPerative SystEms for Intelligent Road Safety (COOPERS), on driver behavior. Thirty-five test drivers drove an instrumented vehicle, twice, with and without the system. Data related to driving behavior, physiological measurements, and user acceptance was collected. A macro-level approach was used to evaluate the potential impact of such systems on driver behavior and traffic safety. The results in terms of speeds, following gaps, and physiological measurements indicate a positive impact. Furthermore, drivers’ opinions show that the system is in general acceptable and useful.     

Integrating mobile agent technology with multi-agent systems for distributed traffic detection and management systems

Agent technology is rapidly emerging as a powerful computing paradigm to cope with the complexity in dynamic distributed systems, such as traffic control and management systems. However, while a number of agent-based traffic control and management systems have been proposed and the multi-agent systems have been studied, to the best of our knowledge, the mobile agent technology has not been applied to this field. In this paper, we propose to integrate mobile agent technology with multi-agent systems to enhance the ability of the traffic management systems to deal with the uncertainty in a dynamic environment. In particular, we have developed an IEEE FIPA compliant mobile agent system called Mobile-C and designed an agent-based real-time traffic detection and management system (ABRTTDMS). The system based on Mobile-C takes advantages of both stationary agents and mobile agents. The use of mobile agents allows ABRTTDMS dynamically deploying new control algorithms and operations to respond unforeseen events and conditions. Mobility also reduces incident response time and data transmission over the network. The simulation of using mobile agents for dynamic algorithm and operation deployment demonstrates that mobile agent approach offers great flexibility in managing dynamics in complex systems.     

Driver response to variable message signs: a stated preference investigation

This paper uses a Stated Preference approach to undertake a detailed assessment of the effect on drivers’ route choice of information provided by variable message signs (VMS). Although drivers’ response to VMS information will vary according to the availability of alternative routes and the extent to which they are close substitutes, our findings show that route choice can be strongly influenced by the provision of information about traffic conditions ahead. This has important implications for the use of VMS systems as part of comprehensive traffic management and control systems. The principal findings are that the impact of VMS information depends on: the content of the message, such as the cause of delay and its extent; local circumstances, such as relative journey times in normal conditions; and drivers’ characteristics, such as their age, sex and previous network knowledge. The impact of qualitative indicators, visible queues and delays were examined. It was found that not only is delay time more highly valued than normal travel time, which is to be expected, but that drivers become more sensitive to delay time as delay times increased across the range presented.     

Behavior-consistent real-time traffic routing under information provision

The problem addressed here involves a controller seeking to enhance traffic network performance via real-time routing information provision to drivers while explicitly accounting for drivers’ likely reactions towards the information. A fuzzy control modeling approach is used to determine the associated behavior-consistent information-based network control strategies. Experiments are performed to compare the effectiveness of the behavior-consistent approach with traditional dynamic traffic assignment based approaches for deployment. The results show the importance of incorporating driver behavior realistically in the determination of the information strategies. Significant differences in terms of system travel time savings and compliance to the information strategies can be obtained when the behavior-consistent approach is compared to the traditional approaches. The behavior-consistent approach can provide more robust performance compared to the standard user or system optimal information strategies. Subject to a meaningful estimation of driver behavior, it can ensure system performance improvement. By contrast, approaches that do not seek to simultaneously achieve the objectives of the drivers and the controller can potentially deteriorate system performance because the controller may over-recommend or under-recommend some routes, or recommend routes that are not considered by the drivers.     

Simulation of electric vehicle driver behaviour in road transport and electric power networks

The integration of electric vehicles (EVs) will affect both electricity and transport systems and research is needed on finding possible ways to make a smooth transition to the electrification of the road transport. To fully understand the EV integration consequences, the behaviour of the EV drivers and its impact on these two systems should be studied. This paper describes an integrated simulation-based approach, modelling the EV and its interactions in both road transport and electric power systems. The main components of both systems have been considered, and the EV driver behaviour was modelled using a multi-agent simulation platform. Considering a fleet of 1000 EV agents, two behavioural profiles were studied (Unaware/Aware) to model EV driver behaviour. The two behavioural profiles represent the EV driver in different stages of EV adoption starting with Unaware EV drivers when the public acceptance of EVs is limited, and developing to Aware EV drivers as the electrification of road transport is promoted in an overall context. The EV agents were modelled to follow a realistic activity-based trip pattern, and the impact of EV driver behaviour was simulated on a road transport and electricity grid. It was found that the EV agents’ behaviour has direct and indirect impact on both the road transport network and the electricity grid, affecting the traffic of the roads, the stress of the distribution network and the utilization of the charging infrastructure.     

Evaluation of the Transferability of Incident Detection Algorithms Developed for Singapore Expressways

ABSTRACT

Two new detection algorithms, single-station DV (dual-variable) and dual-station CODE (COmbined Detector Evaluation) were developed earlier using 160 incidents collected along Singapore's Central Expressway (CTE). The transferability of these CTE-developed algorithms is assessed, as a case study, using 100 incidents collected from the Tullamarine Freeway and South Eastern Freeway in Melbourne, Australia. The investigation covers the differences in traffic detector systems (loop detectors versus video-based), road geometry and behaviour between drivers in Singapore and Australia. The re-calibrated application of these algorithms to freeways in Melbourne yielded a reasonably good detection performance as well as satisfying the average expected performances of seven traffic management centres surveyed in the USA. The results suggested that the detection logic of the algorithms developed for CTE possessed reasonably good transferability and are also suitable for receiving traffic inputs from video-based detectors as well as from loop detectors.     

Modeling the effects of traveler information on freeway origin–destination demand prediction

The primary focus of this research is to develop an approach to capture the effect of travel time information on travelers’ route switching behavior in real-time, based on on-line traffic surveillance data. It also presents a freeway Origin–Destination demand prediction algorithm using an adaptive Kalman Filtering technique, where the effect of travel time information on users’ route diversion behavior has been explicitly modeled using a dynamic, aggregate, route diversion model. The inherent dynamic nature of the traffic flow characteristics is captured using a Kalman Filter modeling framework. Changes in drivers’ perceptions, as well as other randomness in the route diversion behavior, have been modeled using an adaptive, aggregate, dynamic linear model where the model parameters are updated on-line using a Bayesian updating approach. The impact of route diversion on freeway Origin–Destination demands has been integrated in the estimation framework. The proposed methodology is evaluated using data obtained from a microscopic traffic simulator, INTEGRATION. Experimental results on a freeway corridor in northwest Indiana establish that significant improvement in Origin–Destination demand prediction can be achieved by explicitly accounting for route diversion behavior.     

Modeling speed-flow relationship and merging behavior in work zone merging areas

This paper aims to investigate the speed-flow relationship and drivers’ merging behavior in work zone merging areas. It first proposes lane-based speed-flow models, incorporating traffic conflicts among the lanes. It proceeds to develop a desired merging location model determining where drivers start to consider merging and a binary logit model that is applied to estimate the probabilities that drivers will merge into current adjacent gaps. A merging distance model is also proposed to find the 85th percentile of the merging distance. Finally, real work zone traffic data in Singapore are used to calibrate and evaluate the developed models. The findings show that the speed-flow relationship in the through lane is affected by the merge lane traffic under uncongested circumstances. Satisfactory results indicate that the merging behavioral models can competently predict drivers’ merging behavior and that the merging distance model could provide accurate information for traffic engineers to calculate the merge lane length.     

Modelling lane changing and merging in microscopic traffic simulation

This paper introduces Simulation of Intelligent TRAnsport Systems (SITRAS), a massive multi-agent simulation system in which driver-vehicle objects are modelled as autonomous agents. The simulation outputs can be used for the evaluation of Intelligent Transport Systems applications such as congestion and incident management, public transport priority and dynamic route guidance. The model concepts and specifications, and the first applications of the model in the area of incident modelling in urban arterial networks were described in previous publications. This paper presents the details of the lane changing and merging algorithms developed for the SITRAS model. These models incorporate procedures for ‘forced’ and ‘co-operative’ lane changing which are essential for lane changing under congested (and incident-affected) traffic conditions. The paper describes the algorithms and presents simulation examples to demonstrate the effects of the implemented models. The results indicate that only the forced and cooperative lane changing models can produce realistic flow-speed relationships during congested conditions.     

Validating the results of a route choice simulator

This paper describes the validation of a route choice simulator known as VLADIMIR (Variable Legend Assessment Device for Interactive Measurement of Individual Route choice). VLADIMIR is an interactive computer-based tool designed to study drivers’ route choice behaviour. It has been extensively used to obtain data on route choice in the presence of information sources such as Variable Message Signs or In-Car Navigation devices. The simulator uses a sequence of digitized photographs to portray a real network with junctions, links, landmarks and road signs. Subject drivers are invited to make journeys between specified origins and destinations under a range of travel scenarios, during which the simulator automatically records their route choices. This paper describes validation experiments carried out during the period Summer 1994 to Autumn 1995 and reports on the results obtained. Each experiment involved a comparison of routes selected in real life with those driven under simulated conditions in VLADIMIR. The analysis included investigation of the subjects’ own assessment of the realism of the VLADIMIR routes they had chosen, a comparison of models based on the real life routes with models based on VLADIMIR routes, and a statistical comparison of the two sets of routes. After an extensive series of data collection exercises and analyses, we have concluded that a well designed simulator is able to replicate real life route choices with a very high degree of detail and accuracy. Not only was VLADIMIR able to precisely replicate the route choices of drivers who were familiar with the network but it also appears capable of representing the kind of errors made and route choice strategies adopted by less familiar drivers. Furthermore, evidence is presented to suggest that it can accurately replicate route choice responses to roadside VMS information.     

Overtaking assistant assessment using traffic simulation

This contribution presents the results of a microscopic traffic simulation study of the potential effects of an overtaking assistant for two-lane rural roads. The overtaking assistant is developed to support drivers in judging whether or not an overtaking opportunity can be accepted based on the distance to the next oncoming vehicle. Drivers have been found to consider this to be a difficult part of an overtaking manoeuvre. The assistant’s effects on traffic efficiency, driver comfort and road safety have been investigated using traffic simulation. The results indicate that this type of overtaking assistant can provide safety benefits in terms of increased average time-to-collision to the next oncoming vehicle during overtaking manoeuvres. This safety benefit can be achieved without negative consequences for traffic efficiency and driver comfort. A driver assistance system that supports the distance judging part of overtaking manoeuvres can therefore contribute to improved traffic conditions on the two-lane rural roads of the future.     

Influence of coordinated traffic lights parameters on roadside pollutant concentrations

The paper examines the effects of coordinated traffic lights on CO and C₆H₆ roadside concentrations in an urban area of Palermo in Southern Italy. Traffic loop detectors and one pollution-monitoring are used to collect data for use in DRACULA traffic microsimulator software. CO and C₆H₆ roadside concentrations associated with varying cycle and offset times of the coordinated traffic lights are estimated using a neural network. Two functions were set up describing the relations of pollutant concentrations in term of cycle and offset time.     

Multiagent architectures for intelligent traffic management systems

This paper reports our experiences with agent-based architectures for intelligent traffic management systems. We describe and compare integrated TRYS and TRYS autonomous agents, two multiagent systems that perform decision support for real-time traffic management in the urban motorway network around Barcelona. Both systems draw upon traffic management agents that use similar knowledge-based reasoning techniques in order to deal with local traffic problems. Still, the former achieves agent coordination based on a traditional centralized mechanism, while in the latter coordination emerges upon the lateral interaction of autonomous traffic management agents. We evaluate the potentials and drawbacks of both multiagent architectures for the domain, and develop some conclusions respecting the general applicability of multiagent architectures for intelligent traffic management.     

Multi-agent model predictive control of signaling split in urban traffic networks

The operation of large dynamic systems such as urban traffic networks remains a challenge in control engineering to a great extent due to their sheer size, intrinsic complexity, and nonlinear behavior. Recently, control engineers have looked for unconventional means for modeling and control of complex dynamic systems, in particular the technology of multi-agent systems whose appeal stems from their composite nature, flexibility, and scalability. This paper contributes to this evolving technology by proposing a framework for multi-agent control of linear dynamic systems, which decomposes a centralized model predictive control problem into a network of coupled, but small sub-problems that are solved by the distributed agents. Theoretical results ensure convergence of the distributed iterations to a globally optimal solution. The framework is applied to the signaling split control of traffic networks. Experiments conducted with simulation software indicate that the multi-agent framework attains performance comparable to conventional control. The main advantages of the multi-agent framework are its graceful extension and localized reconfiguration, which require adjustments only in the control strategies of the agents in the vicinity.     

Analysis of a cooperative variable speed limit system using microscopic traffic simulation

Variable speed limit systems where variable message signs are used to show speed limits adjusted to the prevailing road or traffic conditions are installed on motorways in many countries. The objectives of variable speed limit system installations are often to decrease the number of accidents and to increase traffic efficiency. Currently, there is an interest in exploring the potential of cooperative intelligent transport systems including communication between vehicles and/or vehicles and the infrastructure. In this paper, we study the potential benefits of introducing infrastructure to vehicle communication, autonomous vehicle control and individualized speed limits in variable speed limit systems. We do this by proposing a cooperative variable speed limit system as an extension of an existing variable speed limit system. In the proposed system, communication between the infrastructure and the vehicles is used to transmit variable speed limits to upstream vehicles before the variable message signs become visible to the drivers. The system is evaluated by the means of microscopic traffic simulation. Traffic efficiency and environmental effects are considered in the analysis. The results of the study show benefits of the infrastructure to vehicle communication, autonomous vehicle control and individualized speed limits for variable speed limit systems in the form of lower acceleration rates and thereby harmonized traffic flow and reduced exhaust emissions.     

The principles of calibrating traffic microsimulation models

Traffic microsimulation models normally include a large number of parameters that must be calibrated before the model can be used as a tool for prediction. A wave of methodologies for calibrating such models has been recently proposed in the literature, but there have been no attempts to identify general calibration principles based on their collective experience. The current paper attempts to guide traffic analysts through the basic requirements of the calibration of microsimulation models. Among the issues discussed here are underlying assumptions of the calibration process, the scope of the calibration problem, formulation and automation, measuring goodness-of-fit, and the need for repeated model runs.

A State-of-the-Art Review of Car-Following Models with Particular Considerations of Heavy Vehicles

Abstract

Car-following (CF) models are fundamental in the replication of traffic flow and thus they have received considerable attention. This attention needs to be reflected upon at particular points in time. CF models are in a continuous state of improvement due to their significant role in traffic micro-simulations, intelligent transportation systems and safety engineering models. This paper presents a review of existing CF models. It classifies them into classic and artificial intelligence models. It discusses the capability of the models and potential limitations that need to be considered in their improvement. This paper also reviews the studies investigating the impacts of heavy vehicles in traffic stream and on CF behaviour. The findings of the study provide promising directions for future research and suggest revisiting the existing models to accommodate different behaviours of drivers in heterogeneous traffic, in particular, heavy vehicles in traffic.