How to Write a Literature Review Paper?

This paper discusses the question about how to write a literature review paper (LRP). It stresses the primary importance of adding value, rather than only providing an overview, and it then discusses some of the reasons for (or not) actually writing an LRP, including issues relating to the nature and scope of the paper. It also presents different types of LRPs, advises on reporting the methodology used for the selection of papers for review, and the structure of an LRP. An important conclusion is that the heterogeneity in LRPs is very large. This paper also presents some of the aspects that the authors feel are important structural and contextual considerations that help produce high-quality review papers.     

Addendum to “a comparison of heuristics for a school bus scheduling problem”

Given a group of one or more schools, each with a specific arrival time window, and the bus routes serving these schools, the problem is to create an optimum set of combinations of routes to be served by a single bus, where optimality is defined in terms of fleet size and deadhead travel distance. We present the results of a computational study comparing ten heuristics, adapted from procedures which have appeared in the literature, on a set of 30 test problems derived from actual school data. This study is a follow on to that reported in Graham and Nuttle (1986).     

Axial Response of a Compression Pile to Nearby Excavation北大核心CSCD

One of the major concern in the excavation in soft soil areas is the effect of soil movement on adjacent pile foundations. In this paper, three-dimensional finite element models are established to study the axial response of the adjacent pile foundations close to an excavation in soft soil. The results show that, due to the nearby excavation, the axial bearing capacity of a single pile under compression decreases about 13.6%, and considerable additional settlements of a single pile subjected to the working compression load are generated. Therefore, the characteristics of load transfer mechanism between pile shaft and around soil, as well as the tip soil reaction are investigated extensively, which demonstrates that, as expected, the nearby excavation leads to a reduction of ultimate soil friction resistance. Furtherly, the widely employed load transfer method for pile foundation is modified to consider the effects of nearby excavation, which can be employed to predict the axial response of an axially loaded pile foundation beside an excavation. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Applying a structured simulation-based methodology to assess carpooling time–space potential

Abstract

Increasing urban traffic congestion calls for the study of alternative measures. One such measure is carpooling, a system in which a person shares his private vehicle with one or more people in a commuter trip. In principle, this system could lead to potentially significant reductions in the use of private vehicles; however, in practice it has achieved limited success. In this paper, we apply a simulation-based methodology that uses aggregated data from commuter trips in an urban area to create compatible and feasible random trips. These are then analyzed through a heuristic process recursively to find grouping possibilities, thus producing indicators of carpooling potential such as the percentage of matched trips. Using this methodology, simulations are run for the Lisbon Metropolitan Area (Portugal) and results show that an increase in the number of participants in a carpooling scheme will only increase the probability of matching up to a certain point, and that this probability varies significantly with time–space trip attributes.     

Factors contributing to bicycle–motorised vehicle collisions: a systematic literature review

Bicycle–motorised vehicle (BMV) collisions account for the majority of the recorded bicyclists’ fatalities and serious injuries. This systematic review intends to examine the main factors contributing to BMV collisions. We performed a comprehensive literature review on Scopus, TRID, ProQuest, and Web of Science databases. Fifty-nine English-language peer-reviewed articles met the eligibility criteria and were included in the final analysis. The main factors contributing to BMV collisions identified were classified in accordance with a recently published conceptual framework for road safety. The majority of studies have identified factors related to road users’ behaviour (59.3%) and infrastructure characteristics (57.6%). A minority of studies identified variables related to exposure (40.7%) and vehicles (15.3%) as contributor factors to BMV collisions. A small but significant proportion of studies (20.3%) provided evidence that environmental factors may also play a role, although to a lesser extent, in determining BMV collisions. In addition to the three factors comprised in the applied conceptual framework for road safety, we identified environmental conditions as a category of factors contributing to BMV collisions.     

Implementing the maximum likelihood methodology to measure a driver’s critical gap

Most of the capacity calculation procedures for two-way stop-controlled (TWSC) intersections are based on gap acceptance models. Critical gap is one of the major parameters for gap acceptance models. The accuracy of capacity estimation is mainly determined by the accuracy of the critical gap. This paper focuses on the implementation of the maximum likelihood technique to measure a driver’s critical gap using field data. A methodology to define gap events is proposed, so that the accepted gaps and maximum rejected gaps required by the maximum likelihood technique could be obtained. Specific issues regarding multi-lane situations and major street right turn movement are discussed. Special conditions observed during the research are addressed when the proposed method cannot be applied directly, such as the existence of a mid-block refuge area where minor street drivers can seek gaps in a two-stage process, pedestrian blockage, and downstream queue spill back. The proposed method was adopted in measuring critical gap under US conditions during a research project, described by Kyte et al. (1996). ©     

Factors affecting children’s journeys to school: a joint escort-mode choice model

A child’s mode of travelling to school is influenced by, or dependent on, parental choices. Thus, an increasing proportion of car trips may reflect parental choices and constraints. Whether a parent can escort their children to school may depend on their scheduling and spatial constraints, e.g., work schedule and job location in relation to home and school locations. This research aims to understand the effect of household bundling constraints on a child’s escort-mode choice. In this study, school trip data are drawn from the 2001 SCAG (Southern California Association of Governments) Post Census Regional Household Travel Survey. The study area is the five-county Los Angeles region. Our findings show that the parents’, especially the mother’s, increased working hours and more distant job locations result in an increased likelihood of several alternative escort-mode choices. Mothers who work longer hours and further away from home are less likely to chauffeur their children. These trips have been substituted by alternative escort choices such as independent travel and being escorted by fathers, or alternative mode choices such as active commuting and busing. The effect of increased working hours may be offset by the option of flexible working hours, which allows parents to arrange more escort trips. This study elucidates an important aspect in explaining children’s changing mode choice in journeys to school and sheds light on current policy efforts in reducing children’s car dependency.     

Educating parents to support children’s road safety: a review of the literature

ABSTRACT

This narrative review synthesised the limited work that has been carried out into road safety education targeting parents. Parent education appeared to have a positive impact on child safety seat use and children’s bike helmet use, but results regarding the impact of parent education on pedestrian safety were mixed. The review highlighted important gaps in the literature. A key gap being identifying effective ways to engage parents of low socioeconomic and ethnic minority backgrounds. Further, another gap is understanding effective ways to engage and support parents of children with additional needs to build their children’s road safety skills. There is some evidence that parent education has a positive impact on these “at-risk” groups, but little work on how to engage with these groups and the type of parent education required.     

Public–private partnerships: a review of economic considerations with particular reference to transportation projects

The paper sets in context some of the more recent work that has been conducted on public–private partnerships (PPPs) in the provision and operation of infrastructure. PPPs essentially involve a government or its agent signing an agreement with a private company or consortium to supply it with services with the private sector actor involved in major elements of designing, building, temporarily ‘owning’, and running the physical assets; basically they are long-term development and service contracts between government and a private partner. The paper outlines the development of economic thinking regarding the rationale behind PPPs, the extent to which unbundling is optimal and the forms that it may take, the nature of the contracts that are enacted and their renegotiation, the awarding of contracts, and matters of possible corruption. By way of focus, it also provides some indication of what empirical studies in the transportation have thrown up regarding the outcomes of PPPs.     

Should subsidies to urban passenger transport be increased? A spatial CGE analysis for a German metropolitan area

In many countries passenger transport is significantly subsidized in a variety of ways for various reasons. The objective of this paper is to examine efficiency, distributional, environmental (CO₂ emissions) and spatial effects of increasing different kinds of passenger transport subsidies discriminating between household types, travel purposes and travel modes. The effects are calculated by applying a numerical spatial general equilibrium approach calibrated to an average German metropolitan area. In extension to most studies focusing on only one kind of subsidy, we compare the effects of different transport subsidies within the same unified framework that allows to account for two features not yet considered simultaneously in studies on transport subsidies: endogenous labor supply and location decisions. Furthermore, congestion, travel mode choice, travel related CO₂ emissions and institutional details regarding the tax system in Germany are taken into account. The results suggest that optimal subsidy levels are either small or even zero. While subsidizing public transport is welfare enhancing, subsidies to urban road traffic reduce aggregate urban welfare. Concerning the latter it is shown that making investments in urban road infrastructure capacity or reducing gasoline taxes may even be harmful to residents using predominantly automobile. In contrast, pure commuting subsidies hardly affect aggregate urban welfare, but distributional effects are substantial. All policies cause suburbanization of city residents and (except for subsidizing public transport) contribute to urban sprawl by raising the spatial imbalance of residences and jobs but the effect is relatively small. In addition, the policies induce a very differentiated pattern regarding distributional effects, benefits of landowners and environmental effects.     

How to Capture the Passengers’ Point of View on a Transit Service through Rating and Choice Options

Abstract

In this paper, a methodology for capturing the transit passenger’s point of view by using both rating and choice options is proposed. For this purpose, some discrete choice logit models are introduced; the models allow the probability of choice of some alternative transit services to be calculated, and the importance of each service aspect to be determined. The models are calibrated by using data collected by a survey in which a stated preferences experiment was proposed to a sample of passengers, and some judgements were expressed by them about their transit services, in terms of perceptions and expectations. The introduced methodology provides a relevant contribution from a practical viewpoint because it allows the identification of the most important aspects on overall service quality; it is useful to the transit operators for measuring service quality and for investing on the various service aspects in order to effectively improve transit services.     

Is ‘referencing’ a remedy to hypothetical bias in value of time elicitation? Evidence from economic experiments

This paper demonstrates that commonly used methods for eliciting value of time can give downward bias and investigates whether this can be reversed by ‘referencing’ as has been suggested (e.g., by Hensher in Transp Res B 44:735–752, 2010), i.e. with attributes of choice alternatives pivoted around a recently made journey. Value-of-time choice experiments were conducted in two rounds. In the first round, real and hypothetical purchases of performance of a simple time-consuming task were done to assess hypothetical bias; in the second round, participants were asked to do hypothetical travel choices with and without ‘referencing’ to a specific occasion, to be able to test ‘referencing’ as a remedy to the bias confirmed in the first round. A negative hypothetical bias was found for allocation of time at another occasion than the present (but not for a decision concern allocation of time ‘here and now’). A striking result was held from the second round experiments: ‘referencing’ indeed affects responses, but by reducing the elicited implicit value of time, so any negative hypothetical bias that would exist without ‘referencing’ would have been further magnified by the ‘referencing’ design.     

Optimization of the Construction Scheme for a PBA Metro Station Adjacent to an Existing Metro Tunnel北大核心CSCD

The Olympic Park Station crossing the existing Datun-Road tunnel covers a long distance and closely approaches an existing metro tunnel. Initially, the PBA construction method was adopted with eight pilot tunnels. In light of the tunnel group cavern effect and the surrounding soft silty clay with abundant water, the construction risks were very. Optimization of the metro station construction scheme was conducted, and the four pilot tunnels at the downside were cancelled and replaced with long drill hole grouting piles. Construction technology for a large-diame-ter pile for a bored pilot tunnel was adopted based on the engineering characters of the PBA method using four pilot tunnels. Monitoring on the Datunlu tunnel structure was performed during metro station construction and the results indicate that the construction scheme for the station’s main structure was rational; the new construction technology ensures construction safety for the existing tunnel and metro structure. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Do new sources of traffic data make the application of Chaos Theory to traffic management a realistic possibility?

Current signal systems for managing road traffic in many urban areas around the world lack a coordinated approach to detecting the spatial and temporal evolution of congestion across control regions within city networks. This severely inhibits these systems’ ability to detect reliably, on a strategic level, the onset of congestion and implement effective preventative action. As traffic is a time-dependent and non-linear system, Chaos Theory is a prime candidate for application to Urban Traffic Control (UTC) to improve congestion and pollution management. Previous applications have been restricted to relatively uncomplicated motorway and inter-urban networks, arguably where the associated problems of congestion and vehicle emissions are less severe, due to a general unavailability of high-resolution temporal and spatial data that preserve the variability in short-term traffic patterns required for Chaos Theory to work to its full potential. This paper argues that this restriction can now be overcome due to the emergence of new sources of high-resolution data and large data storage capabilities. Consequently, this opens up the real possibility for a new generation of UTC systems that are better able to detect the dynamic states of traffic and therefore more effectively prevent the onset of traffic congestion in urban areas worldwide.     

The ‘Four Dimensions of Behaviour’ framework: a tool for characterising behaviours to help design better interventions

This paper sets out the rationale and structure of a tool for assisting policy-makers and practitioners to understand behavioural challenges and open up thinking on the design of effective ‘behaviour change’ interventions. The ‘Four Dimensions of Behaviour’ (4DB) framework is based on the theoretical and empirical research in a range of policy domains including transport and pro-environmental behaviour more generally. The 4DB framework characterises multifaceted behaviours along dimensions of actor, domain, durability and scope. Its application in workshop or structured settings opens up diverse and non-exclusive discussion on designing interventions to match salient behavioural characteristics. The use of the 4DB framework in the transport domain is demonstrated for travel behaviours of interest to policy-makers using examples of buying plug-in vehicles (PiVs), commuting by bicycle, eco-driving and making business trips by train.     

Effects of providing total cost of ownership information on consumers’ intent to purchase a hybrid or plug-in electric vehicle

Energy-saving technologies have a difficult time being widely accepted in the marketplace when they have a high initial purchase price and deferred financial benefits. Consumers might not realize that, in the long-run, the financial benefits from reduced energy consumption offset much or all of the initial price premium. One strategy to address consumer misconception of this advantage is to supply information on the “total cost of ownership”, a metric which accounts for the purchase price, the cost of the fuel, and other costs over the ownership period. In this article, we investigate how providing information on five-year fuel cost savings and total cost of ownership affects the stated preferences of consumers to purchase a gasoline, conventional hybrid, plug-in hybrid, or battery electric vehicle. Through an online survey with an embedded experimental design using distinct labels, we find that respondent rankings of vehicles are unaffected by information on five-year fuel cost savings. However, adding information about total cost of ownership increases the probability that small/mid-sized car consumers express a preference to acquire a conventional hybrid, plug-in hybrid, or a battery-electric vehicle. No such effect is found for consumers of small sport utility vehicles. Our results are consistent with other findings in the behavioral economics literature and suggest that further evaluation of the effects of providing consumers with information on the total cost of vehicle ownership is warranted.     

What Happened to the National Road Carrier in a Post‐Communist Country? The Case of Poland's State Road Transport

Abstract

The purpose of this article is to seek to reconstruct the ownership transformation involving Poland's State Road Transport (PKS) companies passed through after 1990. Data collected from various sources (above all the Internet) were used to establish the degree of advancement of the transformation processes. Despite the passage of 18 years since the new economic reforms were launched, privatization processes are not well advanced. State ownership remains dominant, in the form of Treasury companies as well as state‐owned enterprises. Privatization processes have encompassed fewer than half of all firms, the most popular form taken (in about a quarter of all analysed cases) involving leasing by workers. This would seem of major interest, attesting as it does to the greater activity of some worker's teams, as well as the passive role of the state in privatization processes. A much smaller number of firms (26) have been purchased by external investors, the only important international concern among these being Veolia, which had taken control of 11 PKS companies as of mid‐2006. By and large, it is the firms carrying passengers or passenger and goods that are in a much better situation, as opposed to the companies that are commodity‐carriers only. The majority of the latter have collapsed, or have undergone the kind of privatization that involves simultaneous shutdown. Mixed passenger and goods carriers have had to reduce their level of activity in commodity transport.     

Users’ perceptions and willingness to pay in interurban toll roads: identifying differences across regions from a nationwide survey in Spain

Users’ acceptability is considered one of the key drivers for the successful implementation of transport policy measures. This is especially crucial in the case of toll roads since they are financed through drivers’ contributions. Previous literature in this field has mainly focused on measuring users’ attitudes towards urban congestion pricing strategies. However limited research has been developed concerning interurban toll roads. Previous research shows that socioeconomic variables are not conclusive to explain users’ perceptions towards tolls. By contrast, other drivers such as regional differences seem to play a more important role, especially when charging conditions within the same nation greatly vary across regions. This paper analyzes regional differences in users’ attitudes within an asymmetrical distribution of the toll road network across regions. Based on a nationwide survey conducted to road users in interurban toll roads in Spain, we develop both a binomial logit and a censored regression (tobit) model to explore drivers’ perceptions and willingness to pay. The research concludes that users from regions with a more extensive tolled network generally show a more negative attitude towards charges, but not necessarily a lower willingness to pay. The paper also points out that an asymmetrical distribution of toll roads across regions may result in negative perceptions among those users perceiving to be unfairly treated when compared to citizens in other regions.