Electric vehicle parking in European and American context: Economic,energy and environmental analysis

The transportation sector faces increasing challenges related to energy consumption and local and global emissions profiles. Thus, alternative vehicle technologies and energy pathways are being considered in order to overturn this trend and electric mobility is considered one adequate possibility towards a more sustainable transportation sector.In this sense, this research work consisted on the development of a methodology to assess the economic feasibility of deploying EV charging stations (Park-EV) by quantifying the tradeoff between economic and energy/environmental impacts for EV parking spaces deployment. This methodology was applied to 4 different cities (Lisbon, Madrid, Minneapolis and Manhattan), by evaluating the influence of parking premium, infrastructure cost and occupancy rates on the investment Net Present Value (NPV). The main findings are that the maximization of the premium and the minimization of the equipment cost lead to higher NPV results. The NPV break-even for the cities considered is more “easily” reached for higher parking prices, namely in the case of Manhattan with the higher parking price profile. In terms of evaluating occupancy rates of the EV parking spaces, shifting from a low usage (LU) to a high usage (HU) scenario represented a reduction in the premium to obtain a NPV = 0 of approximately 14% for a 2500 € equipment cost, and, in the case of a zero equipment cost (e.g. financed by the city), a NPV = 0 was obtained with approximately a 2% reduction in the parking premium. Moreover, due to the use of electric mobility instead of the average conventional technologies, Well-to-Wheel (WTW) gains for Lisbon, Madrid, Minneapolis and Manhattan were estimated in 58%, 53%, 52% and 75% for energy consumption and 66%, 75%, 62% and 86% for CO₂ emissions, respectively.This research confirms that the success of deploying an EV charging stations infrastructure will be highly dependent on the price the user will have to pay, on the cost of the infrastructure deployed and on the adhesion of the EV users to this kind of infrastructure. These variables are not independent and, consequently, the coordination of public policies and private interest must be promoted in order to reach an optimal solution that does not result in prohibitive costs for the users.     

Sulphur abatement globally in maritime shipping

In 2016, the International Maritime Organization (IMO) decided on global regulations to reduce sulphur emissions to air from maritime shipping starting 2020. The regulation implies that ships can continue to use residual fuels with a high sulphur content, such as heavy fuel oil (HFO), if they employ scrubbers to desulphurise the exhaust gases. Alternatively, they can use fuels with less than 0.5% sulphur, such as desulphurised HFO, distillates (diesel) or liquefied natural gas (LNG). The options of lighter fuels and desulphurisation entail costs, including higher energy consumption at refineries, and the present study identifies and compares compliance options as a function of ship type and operational patterns.The results indicate distillates as an attractive option for smaller vessels, while scrubbers will be an attractive option for larger vessels. For all vessels, apart from the largest fuel consumers, residual fuels desulphurised to less than 0.5% sulphur are also a competing abatement option. Moreover, we analyse the interaction between global SO_X reductions and CO₂ (and fuel consumption), and the results indicate that the higher fuel cost for distillates will motivate shippers to lower speeds, which will offset the increased CO₂ emissions at the refineries. Scrubbers, in contrast, will raise speeds and CO₂ emissions.     

An optimization model of energy and transportation systems: Assessing the high-speed rail impacts in the United States

This paper presents a long-term investment planning model that co-optimizes infrastructure investments and operations across transportation and electric infrastructure systems for meeting the energy and transportation needs in the United States. The developed passenger transportation model is integrated within the modeling framework of a National Long-term Energy and Transportation Planning (NETPLAN) software, and the model is applied to investigate the impact of high-speed rail (HSR) investments on interstate passenger transportation portfolio, fuel and electricity consumption, and 40-year cost and carbon dioxide (CO₂) emissions. The results show that there are feasible scenarios under which significant HSR penetration can be achieved, leading to reasonable decrease in national long-term CO₂ emissions and costs. At higher HSR penetration of approximately 30% relative to no HSR in the portfolio promises a 40-year cost savings of up to $0.63 T, gasoline and jet fuel consumption reduction of up to 34% for interstate passenger trips, CO₂ emissions reduction by about 0.8 billion short tons, and increased resilience against petroleum price shocks. Additionally, sensitivity studies with respect to light-duty vehicle mode share reveal that in order to realize such long-term cost and emission benefits, a change in the passenger mode choice is essential to ensure higher ridership for HSR.     

Assessing CO2 emissions of electric vehicles in Germany in 2030

Electric vehicles are often said to reduce carbon dioxide (CO₂) emissions. However, the results of current comparisons with conventional vehicles are not always in favor of electric vehicles. We outline that this is not only due to the different assumptions in the time of charging and the country-specific electricity generation mix, but also due to the applied assessment method. We, therefore, discuss four assessment methods (average annual electricity mix, average time-dependent electricity mix, marginal electricity mix, and balancing zero emissions) and analyze the corresponding CO₂ emissions for Germany in 2030 using an optimizing energy system model (PERSEUS-NET-TS). Furthermore, we distinguish between an uncontrolled (i.e. direct) charging and an optimized controlled charging strategy. For Germany, the different assessment methods lead to substantial discrepancies in CO₂ emissions for 2030 ranging from no emissions to about 0.55 kg/kWh_el (110 g/km). These emissions partly exceed the emissions from internal combustion engine vehicles. Furthermore, depending on the underlying power plant portfolio and the controlling objective, controlled charging might help to reduce CO₂ emissions and relieve the electricity grid. We therefore recommend to support controlled charging, to develop consistent methodologies to address key factors affecting CO₂ emissions by electric vehicles, and to implement efficient policy instruments which guarantee emission free mobility with electric vehicles agreed upon by researchers and policy makers.     

Economic valuation of Well-To-Wheel CO2 emissions from freight transport along the main transalpine corridors

CO₂ emissions are one of the main externalities related to freight transport. Their evaluation is extremely difficult, due to the presence of several scientific and economic uncertainties. This paper discusses the approaches currently adopted by literature to deal with CO₂, proposing a methodology based on a Well-To-Wheel quantification and an economic valuation deriving from a meta-regression. A freight transport analysis is then provided for one of the most critical areas of Europe, the Alps. Here, the different approaches adopted by the single nations determine divergent results in terms of modal shift towards rail and, consequently, CO₂ emissions. An integrated and transnational strategy could lead to better results, avoiding detoured traffic and increasing the share of railway traffic. To this aim, the carbon impacts of three specific alpine-wide measures are evaluated: namely, Alpine Crossing Exchange, Emissions Trading and Differentiated Toll System. In comparison with business-as-usual scenario, the case study reveals a potential CO₂ saving up to more than 600,000 tons and 38 M€ for the year 2030, thus providing policy makers with an integrative transnational tool able to evaluate the long-term carbon impact of their transport decisions.     

CO2 emissions and expansion of railway,road, airline and in-land waterway networks over the 1985–2013 period in China: A time series analysis

China, the world’s largest CO₂ emitter, is continuing its long-term strategy to use transportation investments as a tool for development. With the expectation that transportation will contribute 30–40% of the total CO₂ emissions in China in the near future, there is an imminent need to identify how the development of different transportation modes may have different long-term effects on CO₂ emissions. Using time series data over the period of 1985–2013, this paper applies the combined autoregressive distributed lag (ARDL) and vector error correction model (VECM) approach to identify short- and long-run causal relationships between CO₂ emissions and mode-specific transportation development, including railway, road, airline, and inland waterway. We find that China’s domestic expansions of road, airline, and waterway infrastructure lead to long-run increases in CO₂ emissions. Among them, waterway has the strongest positive impact on CO₂ emissions, followed by road. Despite a short-run, positive impact on CO₂ emissions, railway expansion leads to long-run decreases in CO₂ emissions. The results are especially encouraging for the central government of China given its long-standing and on-going efforts to expand railway infrastructure at the national level. Looking forward, it is recommended that China continues its national investments in railway infrastructure to achieve both environment and economy goals.     

Six years of CO2-based tax incentives for new passenger cars in The Netherlands: Impacts on purchasing behavior trends and CO2 effectiveness

There is growing evidence that consumers respond more effectively to upfront price signals, such as vehicle purchase taxes and feebate policies, and to tax incentives that are more salient than others, such as company car taxes graded by CO₂ emissions. This paper examines tax changes in The Netherlands, which are among the most stringent and most salient in Europe, and assesses the ex-post purchasing impacts and CO₂ effectiveness of six years of CO₂-based tax incentives for low-carbon cars in The Netherlands. Dutch tax incentives resulted in 13 g/km, or 11% lower average CO₂ emissions in 2013. The Netherlands has moved from the 12th position before the tax changes in 2007 to become Europe’s number one in terms of the lowest average new car CO₂ emissions and highest share of electric vehicles in 2013. Tax incentives for new cars sold between 2008 and 2013 have resulted in 4.6 million tons of potential lifetime CO₂ abatement at the cost of a drop in tax revenues of 30–50%. However, when corrected for the Dutch policy-induced increasing real-world fuel-economy shortfall and leakage of carbon reduction potential through vehicle export of low-carbon cars, only 3.5 million tons or 75% of the CO₂ reduction remains. CO₂-based tax incentives for company cars seem to have contributed the most to the observed turnaround in purchasing behavior towards lower CO₂-emitting passenger cars.     

Effects of battery chemistry and performance on the life cycle greenhouse gas intensity of electric mobility

Lithium traction batteries are a key enabling technology for plug-in electric vehicles (PEVs). Traction battery manufacture contributes to vehicle production emissions, and battery performance can have significant effects on life cycle greenhouse gas (GHG) emissions for PEVs. To assess emissions from PEVs, a life cycle perspective that accounts for vehicle production and operation is needed. However, the contribution of batteries to life cycle emissions hinge on a number of factors that are largely absent from previous analyses, notably the interaction of battery chemistry alternatives and the number of electric vehicle kilometers of travel (e-VKT) delivered by a battery. We compare life cycle GHG emissions from lithium-based traction batteries for vehicles using a probabilistic approach based on 24 hypothetical vehicles modeled on the current US market. We simulate life-cycle emissions for five commercial lithium chemistries. Examining these chemistries leads to estimates of emissions from battery production of 194–494 kg CO₂ equivalent (CO₂e) per kWh of battery capacity. Combined battery production and fuel cycle emissions intensity for plug-in hybrid electric vehicles is 226–386 g CO₂e/e-VKT, and for all-electric vehicles 148–254 g CO₂e/e-VKT. This compares to emissions for vehicle operation alone of 140–244 g CO₂e/e-VKT for grid-charged electric vehicles. Emissions estimates are highly dependent on the emissions intensity of the operating grid, but other upstream factors including material production emissions, and operating conditions including battery cycle life and climate, also affect life cycle GHG performance. Overall, we find battery production is 5–15% of vehicle operation GHG emissions on an e-VKT basis.     

Energy use and emissions of two stroke-powered tricycles in Metro Manila

CO, CO₂, NO_x and HC emissions of two stroke-powered tricycles in Metro Manila are examined using an instantaneous emissions model. Results show that fuel consumption and HC emissions in middle class residential areas and main roads are similar but lower than levels in low income residential areas. On the average, tricycles in Metro Manila consume 24.41 km/l of fuel and produces 9.5, 9.7, 40.5 and 0.07 g/km of HC, CO, CO₂ and NO_x, respectively. They fail to satisfy HC, CO and NO_x emission limits set by reference standards in the Philippines and other Asian countries. They produce greater HC and CO emissions than gasoline fueled private cars and diesel powered public jeepneys, taxis and buses on a per passenger-km basis but significantly lower NO_x emissions. Tricycles account for 15.4% of the total HC emissions from mobile sources in the metropolis while their contributions to CO, CO₂ and NO_x are minimal.     

Influence of driving patterns on vehicle emissions: A case study for Latin American cities

On-board real-time emission experiments were conducted on 78 light-duty vehicles in Bogota. Direct emissions of carbon monoxide (CO), carbon dioxide (CO₂), nitrogen oxides (NO_x) and hydrocarbons (HC) were measured. The relationship between such emissions and vehicle specific power (VSP) was established. The experimental matrix included both gasoline-powered and retrofit dual fuel (gasoline–natural gas) vehicles. The results confirm that VSP is an appropriate metric to obtain correlations between driving patterns and air pollutant emissions. Ninety-five percent of the time vehicles in Bogota operate in a VSP between −15.2 and 17.7 kW ton⁻¹, and 50% of the time they operate between −2.9 and 1.2 kW ton⁻¹, representing low engine-load and near-idling conditions, respectively. When engines are subjected to higher loads, pollutant emissions increase significantly. This demonstrates the relevance of reviewing smog check programs and command-and-control measures in Latin America, which are widely based on static (i.e., idling) emissions testing. The effect of different driving patterns on the city’s emissions inventory was determined using VSP and numerical simulations. For example, improving vehicle flow and reducing sudden and frequent accelerations could curb annual emissions in Bogota by up to 12% for CO₂, 13% for CO and HC, and 24% for NO_x. This also represents possible fuel consumption savings of between 35 and 85 million gallons per year and total potential economic benefits of up to 1400 million dollars per year.     

Will technological progress be sufficient to stabilize CO2 emissions from air transport in the mid-term?

This article investigates whether anticipated technological progress can be expected to offset the CO₂ emissions resulting from rapid air traffic growth. Global aviation CO₂ emissions projections are examined for eight geographical zones until 2025. Air traffic flows are forecast using a dynamic panel-data econometric model, and then converted into corresponding quantities of air traffic CO₂ emissions using specific hypotheses and energy factors. None of our nine scenarios appears compatible with the objective of 450 ppm CO₂-eq. recommended by the Intergovernmental Panel on Climate Change. Nor is any compatible with the Panel’s aim of limiting global warming to 3.2 °C.     

Comparing and presenting city-level transportation CO2 emissions using GIS

In 2011, the European Pollutant Release and Transfer Register (E-PRTR) inventory of diffuse emissions became available, providing data on a range of atmospheric emissions at a 5 km resolution across Europe. The data are produced from spatially disaggregated emissions totals for countries, and must be validated before being used at a sub-national level. The UK government maintains a 1 km resolution emissions inventory based on a bottom-up methodology by which a validation is possible. The UK National Atmospheric Emissions Inventory data are used to assess at what geographic scale the new E-PRTR data might be most useful. This paper compares the two data sets and estimates city-level transportation CO₂ emissions for 149 EU cities. We find that at a functional boundary level the two datasets match well.     

VISSIM/MOVES integration to investigate the effect of major key parameters on CO2 emissions

This paper looks at CO₂ emissions on limited access highways in a microscopic and stochastic environment using an optimal design approach. Estimating vehicle emissions based on second-by-second vehicle operation allows the integration of a microscopic traffic simulation model with the latest US Environmental Protection Agency’s mobile source emissions model to improve accuracy. A factorial experiment on a test bed prototype of the I-4 urban limited access highway corridor located in Orlando, Florida was conducted to identify the optimal settings for CO₂ emissions reduction and to develop a microscopic transportation emission prediction model. An exponentially decaying function towards a limiting value expressed in the freeway capacity is found to correlate with CO₂ emission rates. Moreover, speeds between 55 and 60 mph show emission rate reduction effect while maintaining up to 90% of the freeway’s capacity. The results show that speed has a significant impact on CO₂ emissions when detailed and microscopic analysis of vehicle operations of acceleration and deceleration are considered.     

Regional climate impact of aerosols emitted by transportation modes and potential effects of policies on demand and emissions

The transportation system is one of the main sectors with significant climate impact. In the U.S. it is the second main emitter of carbon dioxide. Its impact in terms of emission of carbon dioxide is well recognized. But a number of aerosol species have a non-negligible impact. The radiative forcing due to these species needs to be quantified. A radiative transfer code is used. Remote sensing data is retrieved to characterize different regions. The radiative forcing efficiency for black carbon are 396 ± 200 W/m²/AOD for the ground mode and 531 ± 190 W/m²/AOD for the air transportation, under clear sky conditions. The radiative forcing due to contrail is 0.14 ± 0.06 W/m² per percent coverage. Based on the forcing from the different species emitted by each mode of transportation, policies may be envisioned. These policies may affect demand and emissions of different modes of transportation. Demand and fleet models are used to quantify these interdependencies. Depending on the fuel price of each mode, mode shifts and overall demand reduction occur, and more fuel efficient vehicles are introduced in the fleet at a faster rate. With the introduction of more fuel efficient vehicles, the effect of fuel price on demand is attenuated. An increase in fuel price of 50 cents per gallon, scaled based on the radiative forcing of each mode, results in up to 5% reduction in emissions and 6% reduction in radiative forcing. With technologies, significant reduction in climate impact may be achieved.     

Vehicle restrictions and CO2 emissions in Beijing – A simple projection using available data

The Beijing Government launched a new policy on restricting vehicle ownership in late 2010 to regulate the faster motorization and the excessive vehicular carbon dioxide (CO₂) emissions. In this paper, we first analyzed this policy and its effect on private passenger vehicle population. The private passenger vehicle population in Beijing from 2011 to 2020 was predicted under three different scenarios: no constraint (NC), current constraint (CC) and tighter constraint (TC). Then the assessment of vehicular emissions reduction benefits was made on the basis of private passenger vehicle population, vehicle kilometers traveled and CO₂ emission factors. It was projected that the CO₂ emissions in 2020 will reach 23.90, 15.55 and 13.23 million tons under NC, CC and TC respectively. The policy is very effective in controlling the faster motorization and reducing CO₂ emissions.     

An environmental assessment of air traffic speed constraints in the departure phase of flight: A case study at Gothenburg Landvetter Airport,Sweden

This paper considers the environmental effects of air traffic management speed constraints during the departure phase of flight. We present a CO₂ versus noise trade-off study that compares aircraft departure procedures subject to speed constraints with a free speed scenario. A departure route at Gothenburg Landvetter Airport in Sweden is used as a case study and the analysis is based on airline flight recorded data extracted from the Airbus A321 aircraft. Results suggest that CO₂ emissions could be reduced by 180 kg per flight if all departure speed constraints were removed at a cost of increased noise exposure below 70 dB(A).     

Reducing CO<Subscript>2</Subscript> from cars in the European Union

The European Union (EU) recently adopted CO₂ emissions mandates for new passenger cars, requiring steady reductions to 95 gCO₂/km in 2021. We use a multi-sector computable general equilibrium (CGE) model, which includes a private transportation sector with an empirically-based parameterization of the relationship between income growth and demand for vehicle miles traveled. The model also includes representation of fleet turnover, and opportunities for fuel use and emissions abatement, including representation of electric vehicles. We analyze the impact of the mandates on oil demand, CO₂ emissions, and economic welfare, and compare the results to an emission trading scenario that achieves identical emissions reductions. We find that vehicle emission standards reduce CO₂ emissions from transportation by about 50 MtCO₂ and lower the oil expenditures by about €6 billion, but at a net added cost of €12 billion in 2020. Tightening CO₂ standards further after 2021 would cost the EU economy an additional €24–63 billion in 2025, compared with an emission trading system that achieves the same economy-wide CO₂ reduction. We offer a discussion of the design features for incorporating transport into the emission trading system.     

A study of feasibility and potential benefits of organised car sharing in Ireland

In this study, the market potential of car sharing has been evaluated using multiple alternative scenarios which examine the geographic, financial and environmental factors influencing car sharing adoption. The scenarios are applied to the available and collected travel information of the Irish population to estimate the potential impact of introducing car sharing in Ireland. The analysis identified that car owners who travel predominantly on alternative modes, could make significant cost and CO₂ savings through car sharing. A reduction of yearly CO₂ emissions of 86 kt is readily achievable through car sharing, with reductions up to 895 kt possible with appropriate policy and financial support. These figures are comparable to other measures proposed under the Irish National Climate Change Strategy.     

Estimating the CO2 intensity of intermodal freight transportation

This paper looks at the environmental effects of shifting from road to rail freight transportation. Little data is available to shippers to calculate the potential CO₂ savings of an intermodal shift. In this paper we analyze a data set of more than 400,000 intermodal shipments to calculate the CO₂ intensity of intermodal transportation as a distinct mode. Our results indicate an average intensity of 67 g of CO₂ per ton-mile, but can vary between 29 and 220 g of CO₂ per ton-mile depending on the specific origin–destination lane. We apply the market area concept to explain the variance between individual lane intensities and demonstrate the complexity in predicting the potential carbon savings in a switch from truckload to intermodal.     

Performance and emission characteristics of a spark ignition engine fuelled with butanol isomer-gasoline blends

The heavy reliance on petroleum-derived fuels such as gasoline in the transportation sector is one of the major causes of environmental pollution. For this reason, there is a critical need to develop cleaner alternative fuels. Butanol is an alcohol with four different isomers that can be blended with gasoline to produce cleaner alternative fuels because of their favourable physicochemical properties compared to ethanol. This study examined the effect of butanol isomer-gasoline blends on the performance and emission characteristics of a spark ignition engine. The butanol isomers; n-butanol, sec-butanol, tert-butanol and isobutanol are mixed with pure gasoline at a volume fraction of 20 vol%, and the physicochemical properties of these blends are measured. Tests are conducted on a SI engine at full throttle condition within an engine speed range of 1000–5000 rpm. The results show that there is a significant increase in the engine torque, brake power, brake specific fuel consumption and CO₂ emissions with respect to those for pure gasoline. The butanol isomers-gasoline blends give slightly higher brake thermal efficiency and exhaust gas temperature than pure gasoline at higher engine speeds. The iBu20 blend (20 vol% of isobutanol in gasoline) gives the highest engine torque, brake power and brake thermal efficiency among all of the blends tested in this study. The isobutanol and n-butanol blend results in the lowest CO and HC emissions, respectively. In addition, all of the butanol isomer-gasoline blends yield lower NO emissions except for the isobutanol-gasoline blend.