Improvement of Vehicle Dynamics by Rear Braking Force Control

SUMMARY

A study on effective use of rear braking force to improve a brake performance and vehicle dynamics are carried out. On a ordinary condition, the rear braking force could be more increased to a conventional braking force distribution. Based on this thought, the brake performances are estimated. The results show the effects not only improve the brake performance but also reduce a pitching at braking and moderate a vehicle OS behavior in a turn during braking. These are verified by experimental test vehicle equipped with a rear braking force control system.     

Braking Force Distribution Control for Improved Vehicle Dynamics and Brake Performance

SUMMARY

This paper describes the feasibility of improving the braking performance of a commercial vehicle by using an electronic braking system. An electronic braking system enables the braking force at each wheel to be independently controlled. Braking force distribution control makes the braking force at each wheel proportional to each wheel's load. Results of computer simulation and vehicle test showed that the proposed control laws can eliminate the effects of a laden condition on the braking distance and can increase the degree of deceleration at which wheel lock occurs, resulting in improved vehicle attitude stability during a critical maneuver.     

Zur Steuerbarkeit eines gebremsten Sattelschleppzuges

SUMMARY

(Title: On Controllability of a Tractor-Semitrailer Truck During Braking)

The concept of controllability coming from linear system theory is applied to the motion of a tractor-semitrailer vehicle during straight-line braking. Some states of braking with locked up wheels at different axles are considered. The question whether the system is always controllable must be answered in the negative for locked up wheels at the tractors front axle. In other cases controllability in its mathematical meaning which, however, does not always appear to be fully adequate for practical problems, is possible.     

Study of the Pneumatic Tyre Behaviour on Dry and Rigid Road by Finite Element Method

SUMMARY

The paper presents a physical tyre model capable of describing the complete pneumatic tyre behaviour during steady and transient states. Given the radial deflection, the longitudinal and lateral slip, the camber angle, the inner pressure and the mechanical parameters describing the tyre structure, the model returns the vertical load, the longitudinal and lateral forces, the self aligning torque. Particular attention has been devoted to the computation (by f.e.m.) of tyre carcass and tread deformations; it is explained how side force increases by moderate braking at constant slip angle. An experimental verification validates the model, although more studies could be needed to improve model effectiveness.     

Automotive Stability and Handling Dynamics in Cornering and Braking Maneuvers

SUMMARY

Automotive steering behaviour is classified for steady-state cornering and the definitions of over-/understeer and stability/instability are well known. In this paper it is intended to apply these definitions to combined cornering and braking maneuvers i.e. to extend the criteria to quasi-steady-state conditions. This way of investigation was chosen because it gives a clear idea of the typical handling behaviour. Furthermore, the vehicle behaviour is analyzed using the cornering stiffness of the axles and front/rear cornering stiffness ratio because this is always of primary significance. The following contribution is based on a theoretical analysis considering the most important non-linear vehicle properties.

The paper deals with two groups of vehicles: single vehicles (passenger cars) and combinations (passenger car/caravan and tractor/semitrailer). In the case of combinations the effect of trailers on the towing vehicles is examined. So, careful attention is paid to the coupling forces, which alter the wheel loads and influence steerability and stability.     

Anti-Skid Braking of a Tractor-Semitrailer Truck

ABSTRACT

This paper describes a study of anti-skid braking and the effects of such braking on the handling behavior and braking performance of a tractor-semitrailer truck. The truck, represented by a digital computer model having fourteen degrees of freedom, is taken to be in a cornering maneuver that involves braking and driver steering. Conventional braking or one of three types of anti-skid braking is used in the maneuver. The results show that the effects of anti-skid braking on the handling behavior and braking performance of the truck are beneficial. The results also show that the behavior of the wheels and the handling behavior and braking performance of the truck depend on the type of anti-skid braking used.     

Optimal Control of the Tractor-Semitrailer Truck

SUMMARY

This paper is concerned with the braking performance and the handling behavior of the tractor-semitrailer truck under optimal braking. Optimal control theory is used in order to deal with the problem and a combination of the steepest descent method and the Davidon Fletcher Powell method is used to solve it numerically. Results for some chosen braking maneuvers are obtained for a nonlinear truck model which has 14 degrees of freedom. These results show that, for the chosen maneuvers an idealized anti-skid braking is close to being optimal in the sense defined in this paper. Implementation of an idealized anti-skid braking on the tractor-semitrailer truck, however, may be not desirable.     

The Propagation of Waves in a Semi-Infinite Chain of Material Points and Springs Representing a Long Train

SUMMARY

The dynamical behaviour of the longitudinal motion of a long train on which tractive or braking forces apply, often is investigated by representing the train by a model consisting of a continuous bar in which longitudinal vibrations can occur. In the present publication a model consisting of a chain of material points and springs is proposed. It can be investigated by means of difference equation methods and of Laplace transformations. In certain respects the discrepancies of the results with those obtained for a continuous model, are considerable and it may be concluded that a more complete investigation of the discrete model is necessary.     

The mechanisms involved during the wet braking of new and worn tires

ABSTRACT

Tires are used by the customers during several tens of thousands of kilometres, and before their replacement, the driver will encounter a continuous variation of tread depth due to the tire wearing. Although the wet braking labelling demonstrates the performance of the tire in the new stage, it is known that the wet traction evolves with tire wear. In this paper, an in-depth comparison of the wet grip performance of new and worn tires will be conducted, based on the regulatory wet braking test. For this purpose, we propose an original approach to analyse braking test results, which allows breaking down and quantifying the relative importance of the mechanisms involved during this test. This study demonstrates that two main mechanisms are taking place during the entire test: rubber friction and hydroplaning mechanisms. The µ value obtained at low speeds reflects the friction potential of the tested tires while the decline of performance at higher speeds is attributed to hydroplaning mechanisms. This analysis is conducted on numerous tires and demonstrates that current regulatory test applied on new tires is focussing mainly on the rubber friction mechanism. The same test applied on worn tires exhibits both rubber friction and hydroplaning mechanisms. The mechanisms decomposition shows that the source of the performance decline from new to worn status varies greatly, some tires having most of their performance loss due to hydroplaning, some others due to rubber friction drop.     

Advanced vehicle dynamics of heavy trucks with the perspective of road safety

ABSTRACT

This paper presents state-of-the art within advanced vehicle dynamics of heavy trucks with the perspective of road safety. The most common accidents with heavy trucks involved are truck against passenger cars. Safety critical situations are for example loss of control (such as rollover and lateral stability) and a majority of these occur during speed when cornering. Other critical situations are avoidance manoeuvre and road edge recovery. The dynamic behaviour of heavy trucks have significant differences compared to passenger cars and as a consequence, successful application of vehicle dynamic functions for enhanced safety of trucks might differ from the functions in passenger cars. Here, the differences between vehicle dynamics of heavy trucks and passenger cars are clarified. Advanced vehicle dynamics solutions with the perspective of road safety of trucks are presented, beginning with the topic vehicle stability, followed by the steering system, the braking system and driver assistance systems that differ in some way from that of passenger cars as well.     

Gyroscopic stabilisers for powered two-wheeled vehicles

ABSTRACT

This paper illustrates the potential of a gyroscopic stabiliser for the stabilisation of single-track vehicles, at low and high speed as well as during braking. Alternative systems are considered, including single and twin counter-rotating gyroscopes, spinning and precessing with respect to different axes, either freely (passive stabilisers) or in a controlled way (active stabilisers). A suitable mathematical model has been developed and stability has been investigated both by eigenvalue calculation and time domain simulations. It has been found that the most effective configuration is one where the gyroscope(s) spin with respect to an axis parallel to the wheels' spin axis and swing with respect to the vehicle yaw axis. Passive systems may effectively stabilise both weave and wobble at medium and high speed, but cannot stabilise the vehicle at low and zero speed. On the contrary, actively controlled gyroscopes are capable of stabilising the vehicle in its whole range of operating speed, as well as during braking. The alteration of the original vehicle handling characteristics is negligible when active counter-rotating gyroscopes are used, and still acceptable if a single gyroscope is adopted instead.     

Optimization for Vehicle Suspension I: Time Domain

SUMMARY

A numerical procedure for finding the optimum values of a number of parameters describing a model vehicle suspension has been studied. The vehicle has been modelled by dynamic systems of linear springs and dampers, and the goal is to obtain lower acceleration peaks at an elected design point in the vehicle.

The problem is stated as a mathematical programming problem which can be solved by means of the sequential linear programming technique. The procedure has been implemented for a four wheel independent suspension model capable of being subjected to road irregularities and to centrifugal and braking accelerations.     

Berechnung des extremen Lenk- und Bremsverhaltens von Sattelkraftfahrzeugen

Simulation of Steering and Braking Behaviour of Tractor-Semitrailer Vehicles in Extreme Situations

This paper deals with the simulation of the behaviour of tractor-semitrailer vehicles at braking on wet, slippery road surface. The nonlinear model used for the computation enables to simulate extreme situations at wheel locking and swerving

The instabilities during braking such as jackknifing and trailer swing as well as non steerability are investigated. Straightline braking shows the influence of cornering on the behaviour during braking in a turn.     

Trends in vehicle motion control for automated driving on public roads

ABSTRACT

In this paper, we describe how vehicle systems and the vehicle motion control are affected by automated driving on public roads. We describe the redundancy needed for a road vehicle to meet certain safety goals. The concept of system safety as well as system solutions to fault tolerant actuation of steering and braking and the associated fault tolerant power supply is described. Notably restriction of the operational domain in case of reduced capability of the driving automation system is discussed. Further we consider path tracking, state estimation of vehicle motion control required for automated driving as well as an example of a minimum risk manoeuver and redundant steering by means of differential braking. The steering by differential braking could offer heterogeneous or dissimilar redundancy that complements the redundancy of described fault tolerant steering systems for driving automation equipped vehicles. Finally, the important topic of verification of driving automation systems is addressed.     

Formulation and interpretation of optimal braking and steering patterns towards autonomous safety-critical manoeuvres

ABSTRACT

Stability control of a vehicle in autonomous safety-critical at-the-limit manoeuvres is analysed from the perspective of lane keeping or lane changing, rather than that of yaw control as in traditional ESC systems. An optimal control formulation is developed, where the optimisation criterion is a linear combination of the initial and final velocity of the manoeuvre. Varying the interpolation parameter in this formulation turns out to result in an interesting family of optimal braking and steering patterns in stabilising manoeuvres. The two different strategies of optimal lane-keeping control and optimal yaw control are shown to be embedded in the formulation and result from the boundary values of the parameter. The results provide new insights and have the potential to be used for future safety systems that adapt the level of braking to the situation at hand, which is demonstrated through examples of how to exploit theresults.     

Lateral Dynamics of Commercial Vehicle Combinations A Literature Survey

SUMMARY

This paper presents a review of theoretical and experimental works relative to the handling performance of commercial vehicle combinations. A commercial vehicle combination (road train) is defined as a tractor unit and an arbitrary number of trailers. The review contains literature corresponding the most widely used types of trains: tractor-semitrailer, truck-trailer and tractor-semitrailer-semitrailer (doubles). The vehicle dynamic performance has been investigated taking into consideration the following features: directional performance, roll dynamics, braking performance and combined braking and directional performance. With the aim of evaluating the present state of research activities in the field of lateral dynamics of articulated commercial vehicles, the author has compiled some 250 references.     

Semi-Active Attitude and Vibration Control

SUMMARY

The paper discusses the attitude and vibration control of a passenger car on the basis of a full vehicle model. The analysis presented consists of two parts: (I) The introduction of a newly developed semi-active anti-roll/pitch system, (ii) An example of an actively suspended full vehicle model using a simple control strategy to improve ride comfort. The attitude control using semi-actively generated compensation forces prevents the car from rolling in curves and pitching during braking or accelerating. The strength of the system is the small energy consumption. The performance of the combination of both attitude and vibration control can compete with a fully active suspension system.     

Some Design Aspects of Anti-Lock Brake Systems for Commercial Vehicles

SUMMARY

In this paper a simulation model of tractor-semitrailers suitable for design and performance analysis of anti-lock systems is presented. The model is used to evaluate the effects of various methods of prediction and reselection of the anti-lock system on the braking performance of tractor-semitrailers. The characteristics and the equivalent control logic of a commercially available anti-lock system are examined and its deficiencies are identified. To rectify these deficiencies, improved methods of prediction and reselection are proposed. A comparison of the slip characteristics and braking effectiveness between the proposed and the commercially available systems is made. The effects of various types of control logic on the steerability and directional stability of tractor-semitrailers and on the air consumption of the brake systems will be examined in a separate paper.     

Energy recovery based on pedal situation for regenerative braking system of electric vehicle

ABSTRACT

Energy recovery is a key technology to improve energy efficiency and extend driving range of electric vehicle. It is still a challenging issue to maximise energy recovery. We present an energy recovery mode (mode A) which recovers braking energy under all situations that accelerator pedal (AP) is lifted, brake pedal (BP) is depressed, as well as AP and BP are released completely; and propose a control strategy of regenerative braking based on driver's intention identified by a fuzzy recognition method. Other two modes: (1) recovery braking energy only the BP is depressed (mode B), (2) no energy recovery, have been studied to compare with mode A. Simulations are carried out on different adhesion conditions. Recovered energy and driving range are also obtained under FTP75 driving cycle. Road test is implemented to validate simulation results. Results show that mode A can improve energy recovery by almost 15.8% compared with mode B, and extend driving range by almost 8.81% compared with mode B and 20.39% with the mode of no energy recovery; the control strategy of regenerative braking can balance energy recovery and braking stability. The proposed energy recovery mode provides a possibility to achieve a single-pedal design of the electric vehicle.     

I. Minutes of the IAVSD Board Meetings

SUMMARY

A theoretical analysis is presented to model a hydromechanical, semi-active suspension system, first as a single wheel station and then as fitted to each wheel of an off-road vehicle. Predicted results show that two benefits are obtained by comparison with the equivalent passive system. First, vehicle attitude is controlled for changes in body forces arising from static loads or braking/cornering inputs. Second, a significant improvement in ride comfort is obtained because low suspension stiffnesses can be used.