Real-time crash prediction for expressway weaving segments

Weaving segments are potential recurrent bottlenecks which affect the efficiency and safety of expressways during peak hours. Meanwhile, they are one of the most complicated segments, since on- and off-ramp traffic merges, diverges and weaves in the limited space. One effective way to improve the safety of weaving segments is to study crash likelihood using real-time crash data with the objective of, identifying hazardous conditions and reducing the risk of crashes by Intelligent Transportation Systems (ITS) traffic control. This study presents a multilevel Bayesian logistic regression model for crashes at expressway weaving segments using crash, geometric, Microwave Vehicle Detection System (MVDS) and weather data. The results show that the mainline speed at the beginning of the weaving segments, the speed difference between the beginning and the end of weaving segment, logarithm of volume have significant impacts on the crash risk of the following 5–10 min for weaving segments. The configuration is also an important factor. Weaving segment, in which there is no need for on- or off-ramp traffic to change lane, is with high crash risk because it has more traffic interactions and higher speed differences between weaving and non-weaving traffic. Meanwhile, maximum length, which measures the distance at which weaving turbulence no longer has impact, is found to be positively related to the crash risk at the 95% confidence interval. In addition to traffic and geometric factors, wet pavement surface condition significantly increases the crash ratio by 77%. The proposed model along with ITS, e.g., ramp metering, Dynamic Message Sign (DMS), and high friction surface treatment can be used to enhance the safety of weaving segments in real-time.     

Pedestrian crossing detection based on evidential fusion of video-sensors

This paper introduces an online pedestrian crossing detection system that uses pre-existing traffic-oriented video-sensors which, at regular intervals, provide coarse spatial measurements on areas along a crosswalk. Pedestrian crossing detection is based on the recognition of occupancy patterns induced by pedestrians when they move on the crosswalk. In order to improve the ability of non-dedicated sensors to detect pedestrians, we introduce an evidential-based data fusion process that exploits redundant information coming from one or two sensors: intra-sensor fusion uses spatiotemporal characteristics of the measurements and inter-sensor fusion uses redundancy between the two sensors. As part of the EU funded TRACKSS project on cooperative advanced sensors for road traffic applications, real data have been collected on an urban intersection equipped with two cameras. The results obtained show that the data fusion process enhances the quality of occupancy patterns obtained and leads to high detection rates of pedestrian crossings with multi-purpose sensors in operational conditions, especially when a secondary sensor is available.     

Evaluation of variable speed limits to improve traffic safety

This paper examines automated control strategies of variable speed limits that aim at reducing crash potential on instrumented freeways. A real-time crash prediction model was developed to estimate crash potential based on short-term variation of traffic flow characteristics. A microscopic traffic simulation model was used to realistically simulate changes in traffic conditions as an effect of variable speed limits and combined with the crash prediction model for the evaluation of control logics. Within this integrated evaluation framework, the study investigated the effect of strategy control factors on the crash potential reduction and total travel time. The study results indicated that variable speed limits could reduce crash potential by 5–17%, by temporarily reducing speed limits during risky traffic conditions when crash potential exceeded the pre-specified threshold.     

Assessing the impact of reduced visibility on traffic crash risk using microscopic data and surrogate safety measures

Due to the difficulty of obtaining accurate real-time visibility and vehicle based traffic data at the same time, there are only few research studies that addressed the impact of reduced visibility on traffic crash risk. This research was conducted based on a new visibility detection system by mounting visibility sensor arrays combined with adaptive learning modules to provide more accurate visibility detections. The vehicle-based detector, Wavetronix SmartSensor HD, was installed at the same place to collect traffic data. Reduced visibility due to fog were selected and analyzed by comparing them with clear cases to identify the differences based on several surrogate measures of safety under different visibility classes. Moreover, vehicles were divided into different types and the vehicles in different lanes were compared in order to identify whether the impact of reduced visibility due to fog on traffic crash risk varies depending on vehicle types and lanes. Log-Inverse Gaussian regression modeling was then applied to explore the relationship between time to collision and visibility together with other traffic parameters. Based on the accurate visibility and traffic data collected by the new visibility and traffic detection system, it was concluded that reduced visibility would significantly increase the traffic crash risk especially rear-end crashes and the impact on crash risk was different for different vehicle types and for different lanes. The results would be helpful to understand the change in traffic crash risk and crash contributing factors under fog conditions. We suggest implementing the algorithms in real-time and augmenting it with ITS measures such as VSL and DMS to reduce crash risk.     

Modeling traffic crash rates of road segments through a lognormal hurdle framework with flexible scale parameter

This study examines distributional characteristics of crash rates for road segments using observed accident data. The results indicate that the distribution of crash rates is mixed and right‐skewed, which motivates the consideration of non‐normal distributions. With the aid of Kolmogorov–Smirnov tests, kernel density plots, and Q–Q plots, the lognormal distribution is verified as an appropriate candidate for representing the positive domain of crash rates. Then, a lognormal hurdle model was developed and also compared with gamma and Weibull hurdle models. Further, the lognormal hurdle model was revised by allowing the scale parameter to vary with respect to explanatory variables. Such a modification enables the heterogeneous skewness of samples to be captured while enhancing the modeling flexibility. The proposed model was also compared with a Tobit model, an alternative approach that treats crash rates as censored data. Among all these models, the proposed lognormal hurdle model with flexible scale parameter presents the best modeling performance, and the analyses also reveal that several explanatory variables affect crash rates through not only the location parameter but also the scale parameter in the lognormal model. This study finally attempted to inspect crash rates through count models, and it discovered that the proposed hurdle model is superior because it is able to output the whole distribution form of crash rates, whereas the crash count model can only provide the expected value of crash rates, provided the exposure variable servers as an offset term in the link function of the mean parameter. Copyright © 2015 John Wiley & Sons, Ltd.     

Use of magnetic monitoring of vehicles for proactive strategy development

The proactive operational strategy in the transport system which is a parallel concept associated with the Intelligent Transportation System (ITS) seems to be modern and right direction of development. However, the basis for its operation is the “information” in the broad sense of the term, on the functioning of the transport system itself. As new technologies develop, there emerge new opportunities of putting to use a wide array of sensors which can deliver more complete traffic data but using complex matrix of sensors is often unjustified economically and confusing. The paper proposes use of magnetometers as an interesting alternative to pass the requirements of simplicity of application, minimum costs and maximum of acquired information. The process of obtaining the information requires analysis of the quantitative and qualitative changes of the magnetic field. The conducted analyses demonstrate the possibility of using the passive magnetic methods for the purpose of monitoring of vehicles. Placement of the magnetic sensor bear out an important issue and was also discussed. During the experimental research it has been proven that passive magnetic methods enable obtaining the information on the movement of a vehicle as well as on the vehicle itself. Estimations of such values as: vehicle’s moving direction, velocity, dimensions, clearance or mass having ferromagnetic properties and even the state of strain in a vehicle’s structure were confirmed in practice. In addition thanks to magneto-mechanical effects the theoretical possibility of assessing the stress occurring in the components of vehicles, which could be indicative of the volume of cargo carried. Moreover, the crash experiment showed the possibility of a collision detection using magnetic signal. The need for obtaining information increases from year to year, with information becoming the biggest asset which enables both development and effective use of the transport system. Included researches, proofs emerging opportunity of more extensive use of magnetic sensors and the passive magnetic methods which could be applied in the modern transportation system.     

Integrated solution for anomalous driving detection based on BeiDou/GPS/IMU measurements

There has been an increasing role played by Global Navigation Satellite Systems (GNSS) in Intelligent Transportation System (ITS) applications in recent decades. In particular, centimeter/decimetre positioning accuracy is required for some safety related applications, such as lane control, collision avoidance, and intelligent speed assistance. Lane-level Anomalous driving detection underpins these safety-related ITS applications. The two major issues associated with such detection are (1) accessing high accuracy vehicle positioning and dynamic parameters; and (2) extraction of irregular driving patterns from such information. This paper introduces a new integrated framework for detecting lane-level anomalous driving, by combining Global Positioning Systems (GPS), BeiDou, and Inertial Measurement Unit (IMU) with advanced algorithms. Specifically, we use Unscented Particle Filter (UPF) to perform data fusion with different positioning sources. The detection of different types of Anomalous driving is achieved based on the application of a Fuzzy Inference System (FIS) with a newly introduced velocity-based indicator. The framework proposed in this paper yield significantly improved accuracy in terms of positioning and Anomalous driving detection compared to state-of-the-art, while offering an economically viable solution for performing these tasks.     

A generalized sensor location model for the estimation of network origin–destination matrices

This study examined the network sensor location problem by using heterogeneous sensor information to estimate link-based network origin–destination (O–D) demands. The proposed generalized sensor location model enables different sensors’ traffic monitoring capabilities to be used efficiently and the optimal number and deployment locations of both passive- and active-type sensors to be determined simultaneously without path enumeration. The proposed sensor location model was applied to solve the network O–D demand estimation problem. One unique aspect of the proposed model and solution algorithms is that they provide satisfactory network O–D demand estimates without requiring unreasonable assumptions of known prior information on O–D demands, turning proportions, or route choice probabilities. Therefore, the proposed model and solution algorithms can be practically used in numerous offline transportation planning and online traffic operation applications.     

An optimal variable speed limits system to ameliorate traffic safety risk

Active Traffic Management (ATM) systems have been emerging in recent years in the US and Europe. They provide control strategies to improve traffic flow and reduce congestion on freeways. This study investigates the feasibility of utilizing a Variable Speed Limits (VSL) system, one key part of ATM, to improve traffic safety on freeways. A proactive traffic safety improvement VSL control algorithm is proposed. First, an extension of the METANET (METANET: A macroscopic simulation program for motorway networks) traffic flow model is employed to analyze VSL’s impact on traffic flow. Then, a real-time crash risk evaluation model is estimated for the purpose of quantifying crash risk. Finally, optimal VSL control strategies are achieved by employing an optimization technique to minimize the total crash risk along the VSL implementation corridor. Constraints are setup to limit the increase of average travel time and the differences of the posted speed limits temporarily and spatially. This novel VSL control algorithm can proactively reduce crash risk and therefore improve traffic safety. The proposed VSL control algorithm is implemented and tested for a mountainous freeway bottleneck area through the micro-simulation software VISSIM. Safety impacts of the VSL system are quantified as crash risk improvements and speed homogeneity improvements. Moreover, three different driver compliance levels are modeled in VISSIM to monitor the sensitivity of VSL effects on driver compliance. Conclusions demonstrated that the proposed VSL system could improve traffic safety by decreasing crash risk and enhancing speed homogeneity under both the high and moderate compliance levels; while the VSL system fails to significantly enhance traffic safety under the low compliance scenario. Finally, future implementation suggestions of the VSL control strategies and related research topics are also discussed.     

Travel itinerary problem

In this study, we propose a travel itinerary problem (TIP) which aims to find itineraries with the lowest cost for travelers visiting multiple cities, under the constraints of time horizon, stop times at cities and transport alternatives with fixed departure times, arrival times, and ticket prices. First, we formulate the TIP into a 0–1 integer programming model. Then, we decompose the itinerary optimization into a macroscopic tour (i.e., visiting sequence between cities) selection process and a microscopic number (i.e., flight number, train number for each piece of movement) selection process, and use an implicit enumeration algorithm to solve the optimal combination of tour and numbers. By integrating the itinerary optimization approach and Web crawler technology, we develop a smart travel system that is able to capture online transport data and recommend the optimal itinerary that satisfies travelers’ preferences in departure time, arrival time, cabin class, and transport mode. Finally, we present case studies based on real-life transport data to illustrate the usefulness of itinerary optimization for minimizing travel cost, the computational efficiency of the implicit enumeration algorithm, and the feasibility of the smart travel system.     

Density/Flow reconstruction via heterogeneous sources and Optimal Sensor Placement in road networks

This paper addresses the two problems of flow and density reconstruction in Road Transportation Networks with heterogeneous information sources and cost effective sensor placement. Following a standard modeling approach, the network is partitioned in cells, whose vehicle densities change dynamically in time according to first order conservation laws. The first problem is to estimate flow and the density of vehicles using as sources of information standard fixed sensors, precise but expensive, and Floating Car Data, less precise due to low penetration rates, but already available on most of main roads. A data fusion algorithm is proposed to merge the two sources of information to estimate the network state. The second problem is to place sensors by trading off between cost and performance. A relaxation of the problem, based on the concept of Virtual Variances, is proposed and solved using convex optimization tools. The efficiency of the designed strategies is shown on a regular grid and in the real world scenario of Rocade Sud in Grenoble, France, a ring road 10.5 km long.     

F型与直壁型护栏在客车撞击下的仿真研究

为了对比研究A类防撞等级中F型混凝土护栏和直壁型混凝土护栏的防护性能,建立两种护栏与客车的有限元模型,运用ANSYS Workbench软件中显式动力学模块,控制仿真碰撞的试验参数,将大客车模型以规定的初速度和碰撞角度进行计算机仿真碰撞试验,从车辆的加速度、车辆运行轨迹、护栏的最大动态变形量等方面综合对比两种护栏的防护性能。结果表明:相比直壁式护栏,F型混凝土护栏防撞性能、安全性能、导向性能较好。     

Estimating vehicle miles traveled combined with ITS data

‘Vehicle miles traveled’ (VMT) is an important performance measure for highway systems. Currently, VMT [or ‘annual average daily traffic’ (AADT)] is estimated from a combination of permanent counting stations and short-term counts done at specified locations as part of the Highway Performance Monitoring System (HPMS) mandated by the US Federal Highway Administration. However, on some roadway sections, Intelligent Transportation Systems (ITS) such as detectors and cameras also produce traffic data. The question addressed in this paper is whether and under what conditions ITS systems data could be used instead of HPMS short-term counts (called ‘coverage counts’)? This paper develops a methodology for determining a threshold number of missing daily traffic counts, or alternatively, the number of valid ITS data observations needed, in order to confidently replace the HPMS coverage counts with ITS data.

Because ITS counts, coverage counts, and actual ground counts (e.g. continuous counts) cannot be found coexisting on a roadway section, it is hard to compare them directly. In this paper, the Monte Carlo simulation method is employed to generate synthetic ITS counts and coverage counts from a set of relatively complete traffic counts collected at a continuous count station. Comparisons are made between simulated ITS counts, coverage counts, and actual ground counts. The simulation results indicate that when there are<330 daily traffic counts missing in a set of ITS counts in a year, that is, when there are at least 35 days of valid data, ITS counts can be used to derive a better AADT than using coverage counts. This result is applied to calculate the VMT for the Hampton Roads region in Virginia. The comparison between the VMTs derived with using and not using the threshold number indicates that these two VMTs are significantly different.     

An adaptive information fusion model to predict the short-term link travel time distribution in dynamic traffic networks

As intelligent transportation systems (ITS) approach the realm of widespread deployment, there is an increasing need to robustly capture the variability of link travel time in real-time to generate reliable predictions of real-time traffic conditions. This study proposes an adaptive information fusion model to predict the short-term link travel time distribution by iteratively combining past information on link travel time on the current day with the real-time link travel time information available at discrete time points. The past link travel time information is represented as a discrete distribution. The real-time link travel time is represented as a range, and is characterized using information quality in terms of information accuracy and time delay. A nonlinear programming formulation is used to specify the adaptive information fusion model to update the short-term link travel time distribution by focusing on information quality. The model adapts good information by weighing it higher while shielding the effects of bad information by reducing its weight. Numerical experiments suggest that the proposed model adequately represents the short-term link travel time distribution in terms of accuracy and robustness, while ensuring consistency with ambient traffic flow conditions. Further, they illustrate that the mean of a representative short-term travel time distribution is not necessarily a good tracking indicator of the actual (ground truth) time-dependent travel time on that link. Parametric sensitivity analysis illustrates that information accuracy significantly influences the model, and dominates the effects of time delay and the consistency constraint parameter. The proposed information fusion model bridges key methodological gaps in the ITS deployment context related to information fusion and the need for short-term travel time distributions.     

Train-to-wayside wireless communication in tunnel using ultra-wide-band and time reversal

The capabilities of ultra-wide-band (UWB) technology make it a viable candidate for fourth generation wireless communication. This paper proposes the use of UWB radio technology and time-reversal (TR) technique for underground train-to-wayside communication systems. UWB technology has the potential to offer simultaneous ground-to-train communication, train location and obstacle detection in front of the trains. Time-reversal channel prefiltering facilitates signal detection and helps reducing interference. Thus, UWB–TR combination provides a challenging, economically sensible, as well as technically effective alternative solution to existing signaling technologies used in urban transport systems. This paper concentrates on the communication function and reports simulation and measurement performance evaluation of such combinations, respectively in a deterministic tunnel channel model and in real tunnel environments. A new approach is also proposed to ensure multiple access (MA) communication using modified-orthogonal waveforms.     

Estimating traffic volumes for signalized intersections using connected vehicle data

Recently connected vehicle (CV) technology has received significant attention thanks to active pilot deployments supported by the US Department of Transportation (USDOT). At signalized intersections, CVs may serve as mobile sensors, providing opportunities of reducing dependencies on conventional vehicle detectors for signal operation. However, most of the existing studies mainly focus on scenarios that penetration rates of CVs reach certain level, e.g., 25%, which may not be feasible in the near future. How to utilize data from a small number of CVs to improve traffic signal operation remains an open question. In this work, we develop an approach to estimate traffic volume, a key input to many signal optimization algorithms, using GPS trajectory data from CV or navigation devices under low market penetration rates. To estimate traffic volumes, we model vehicle arrivals at signalized intersections as a time-dependent Poisson process, which can account for signal coordination. The estimation problem is formulated as a maximum likelihood problem given multiple observed trajectories from CVs approaching to the intersection. An expectation maximization (EM) procedure is derived to solve the estimation problem. Two case studies were conducted to validate our estimation algorithm. One uses the CV data from the Safety Pilot Model Deployment (SPMD) project, in which around 2800 CVs were deployed in the City of Ann Arbor, MI. The other uses vehicle trajectory data from users of a commercial navigation service in China. Mean absolute percentage error (MAPE) of the estimation is found to be 9–12%, based on benchmark data manually collected and data from loop detectors. Considering the existing scale of CV deployments, the proposed approach could be of significant help to traffic management agencies for evaluating and operating traffic signals, paving the way of using CVs for detector-free signal operation in the future.     

The identification and empirical characterization of vehicular (Lagrangian) fundamental diagrams in multilane traffic flow

Traditional macroscopic traffic flow modeling framework adopts the spatial–temporal coordinate system to analyze traffic flow dynamics. With such modeling and analysis paradigm, complications arise for traffic flow data collected from mobile sensors such as probe vehicles equipped with mobile phones, Bluetooth, and Global Positioning System devices. The vehicle‐based measurement technologies call for new modeling thoughts that address the unique features of moving measurements and explore their full potential. In this paper, we look into the concept of vehicular fundamental diagram (VFD) and discuss its engineering implications. VFD corresponds to a conventional fundamental diagram (FD) in the kinematic wave (KW) theory that adopts space–time coordinates. Similar to the regular FD in the KW theory, VFD encapsulates all traffic flow dynamics. In this paper, to demonstrate the full potential of VFD in interpreting multilane traffic flow dynamics, we generalize the classical Edie's formula and propose a direct approach of reconstructing VFD from traffic measurements in the vehicular coordinates. A smoothing algorithm is proposed to effectively reduce the nonphysical fluctuation of traffic states calculated from multilane vehicle trajectories. As an example, we apply the proposed methodology to explore the next‐generation simulation datasets and identify the existence and forms of shock waves in different coordinate systems. Our findings provide empirical justifications and further insight for the Lagrangian traffic flow theory and models when applied in practice. Copyright © 2015 John Wiley & Sons, Ltd.     

Application of traffic microsimulation for evaluating safety performance of urban signalized intersections

The primary objective of this paper is to provide a statistical relationship between traffic conflicts estimated from microsimulation and observed crashes in order to evaluate safety performance, in particular the effect of countermeasures. A secondary objective is to assess the effect of conflict risk tolerance and number of simulation runs on the estimates of countermeasure effects so obtained. Conflicts were simulated for a sample of signalized intersections from Toronto, Canada, using VISSIM microscopic traffic simulation and several crash–conflict relationships were obtained. A separate sample of treated intersections from Toronto was used to compare countermeasure effects from the integrated crash–conflict expression to a conventional, but rigorous crash-based Empirical Bayes before-and-after analysis that was already done, with the results published, for the same sites and treatment. The countermeasure considered for this investigation involved changing the left turn signal operation for the treated intersection sample from permissive to protected-permissive. The results support the view that countermeasure effects can be estimated reliably from conflicts derived from microsimulation, and more so when a suitable number of simulation runs and conflict tolerance thresholds are used in the crash–conflict relationship.     

Investigating the nature and impact of reporting bias in road crash data

This paper investigates the nature, and impact of the reporting bias associated with the police-reported crash data on inferences made using this data. In doing so, we merge a detailed emergency room data and police-reported crash data for a specific region in Denmark. To disentangle potentially common observable and unobservable factors that affect drivers’ injury severity risk and their crash reporting behavior, we formulate a bivariate ordered-response probit model of injury severity risk and crash reporting propensity. To empirically identify the reporting bias in this joint model, we exploit an exogenous police reform that particularly affects some specific municipalities of the region under consideration. The empirical analysis reveals substantial reporting bias in the commonly used police-reported road crash data. This non-random sample selection associated with the police-reported crash data leads to biased estimates on the effect of some of the explanatory variables in injury severity analysis. For instance, estimates based on the police-reported crash data substantially underestimate the effectiveness of seat belt use in reducing drivers’ injury severity risk.