共查询到19条相似文献,搜索用时 765 毫秒
1.
2.
3.
4.
5.
通过对吸扫式扫路车吸嘴口气流状态以及速度测试的分析,在不增加制造和使用成本的前提下,对吸嘴内部结构进行了优化设计,增大了吸力,提高了吸扫式扫路车的扫净率。 相似文献
6.
7.
8.
9.
10.
11.
洗扫车高压水路系统是洗扫车的关键部件之一,其构成由水泵选型、管路设计、清洗喷杆设计和喷嘴参数选定,以及流量控制设计这四大部分确定。由此,针对洗扫车所需的高压水泵的流量和工作压力,对水泵进行合理选型;并根据水泵流量与管路压力损失的关系,介绍了选择管路内径的方法;对不同作业模式下清洗喷杆的布置和喷嘴参数选定进行了分析;在流量控制设计上提出了一种通过合理地减少水流量来延长作业时间和提高清洗效率的改进方案。 相似文献
12.
13.
14.
通过对当前路面清扫车清扫作业装置的分析研究,设计出了一款应用于电动清扫车上的纯扫式清扫作业装置,并通过建立模型,对其主要参数进行了计算和分析。 相似文献
15.
柴油机螺旋进气道流场模拟及参数变动研究 总被引:1,自引:0,他引:1
利用FIRE软件建立了某柴油机螺旋进气道的三维仿真模型,对进气流动进行了CFD模拟计算。在用气道稳流试验台验证了仿真模型的准确性后,分析了进气道内部的流场分布。利用模型的方便性考察了进气门座圈倒角、进气道放置角度等结构参数对进气流场分布的影响,得到了一些有参考价值的结论。 相似文献
16.
C. H. Lee 《International Journal of Automotive Technology》2017,18(2):317-325
CFD simulations of spray tip penetration with the standard KIVA3V, ‘original gas jet’ and ‘Normal gas jet profile with breakup length formula’ (NGJBL) spray models were performed to investigate the effects of nozzle orifice size and ambient gas density combinations on the spray penetration. The accuracy of the CFD simulation results was estimated by comparing them with available experimental data. The ambient gas density was varied in 12 kg/m3 intervals from 12 to 69 kg/m3 for each nozzle orifice diameter. The nozzle orifice diameters used were 119, 140, 183 and 206 mm. A total of 20 cases in the CFD simulations were considered with combinations of the 4 nozzle orifice diameters and 5 ambient gas densities. CFD simulations with the NGJBL spray model were more accurate than those with either the standard KIVA3V or gas jet spray models as the nozzle orifice diameter and ambient gas density was increased. The NGJBL and original gas jet model is more effective in predicting the spray tip penetration near the nozzle tip region. 相似文献
17.
对某柴油机螺旋进气道进行传统的气道稳流试验,得到了涡流比和流量系数。在与试验条件对等的边界条件下,应用仿真软件FIRE建立了气道的三维仿真模型,对不同气门升程下进气道内的流场进行了CFD计算;对比试验与计算的结果,两者吻合良好。结果表明,仿真计算省时,成本低,便于方案对比,可以获得气道内的流场分布规律;在柴油机螺旋进气道设计开发与性能评价中具有实用价值。 相似文献
18.