共查询到20条相似文献,搜索用时 46 毫秒
1.
针对浮筏系统多台泵设备分别安装占用空间资源大、隔振器数量多的问题,研究泵设备模块化成组安装的隔振效果,为潜艇浮筏系统减振隔振提供支撑和依据。保证浮筏结构总质量、设备数量及承载能力基本不变的前提下,通过模块化设计将各泵设备安装基座设计成共用成组筏架,使多台泵设备实现模块化成组安装。使用有限元法建立泵设备模块化成组浮筏隔振系统模型,改变成组筏架的板厚和隔振器刚度等参数,计算分析了成组筏架参数变化对浮筏系统隔振性能的影响。计算分析表明:成组安装可减少泵设备的空间资源占用及隔振器数量,合理范围内减小成组筏架板厚及降低成组筏架隔振器刚度可提高浮筏系统隔振性能,使浮筏隔振系统传递至基座端的振动降低9.3 dB,成组筏架隔振器刚度相比筏架板厚参数对系统隔振效果影响更明显。 相似文献
2.
3.
4.
针对船用浮筏隔振系统,采用有限元分析法,建立平板式和夹层板式两种筏架结构的浮筏隔振系统的有限元分析模型,并估算两种浮筏隔振系统的隔振效果。计算结果表明,夹层板式浮筏隔振系统具有较好的隔振效果,在相同重量的情况下隔振量比平板式浮筏高出3~4dB,为新型筏架结构的研究提供了思路。 相似文献
5.
6.
方开翔 《江苏科技大学学报(社会科学版)》2000,14(1):43-50
基于多层隔振和浮筏技术的理论模型, 分析了当隔振系统的相关结构参数(如: 质量比、筏体及支承的阻尼、弹性支承元件及筏体的刚度等)的变化对具有小质量比的双层隔振系统固有动态特性和隔振效果的影响规律,并计算了一个摆盘式热力发动机圆柱形浮筏隔振系统模型.为该特种动力装置浮筏隔振设计提供了技术基础. 相似文献
7.
8.
9.
柔性浮筏隔振系统的理论建模与仿真研究 总被引:3,自引:0,他引:3
舰船浮筏隔振系统是舰艇、潜艇提高声隐身性能的重要技术途径之一,而功率流是评价隔振系统性能的有效实用方法,文章利用功率流作为浮筏隔振系统的性能评估方法,就筏架和基础结构的柔性变形对隔振效果的影响进行了理论与数值分析,发现在低频段刚性和柔性筏架的数值结果基本一致。还研究了负载质量、隔振器刚度和阻尼以及筏架和基础的结构损耗因子对隔振系统性能的影响。在文中的仿真研究中使用了Adams多体刚柔耦合建模仿真方法分析了浮筏的动力学特性,结果与理论解较为一致。 相似文献
10.
11.
细拖曳线列阵隔振模块隔振性能分析 总被引:1,自引:0,他引:1
为进一步研究因隔振模块直径缩小而导致流噪声恶化的问题,利用ANSYS有限元软件建立了细隔振模块的三维流固耦合模型,对隔振模块的隔振性能进行计算.所得计算结果与粗线列阵隔振模块隔振性能进行比较,分析了隔振模块内部和外部流体、护套和尼龙绳材料弹性模量等对不同直径隔振模块隔振性能的影响,得出隔振模块内部和外部流体对细线列阵隔振模块隔振性能的影响与粗线列阵隔振模块相比增加了流噪声.并研究了护套厚度、隔振组件长度和隔振组件间距对隔振模块隔振性能的影响,研究结果对于提高隔振模块隔振性能具有一定的参考价值. 相似文献
12.
13.
避振穴是一种减小船舶尾部振动的重要装置,本文采用基于橡胶材料超弹性和空气压缩性的非线性有限元方法对其进行数值模拟和隔振特性分析。选取Mooney-Rivlin模型对橡胶材料非线性特性进行模拟,建立气体单元模拟加压空气,对一个独立密闭气室结构进行充气过程模拟和振动响应计算,分析气室深度、初始气压和橡胶板厚度等参数对其隔振特性的影响。将避振穴应用于实船尾部模型,验证其对螺旋桨激振力的隔振效果。计算结果表明,避振穴对于船舶尾部减振具有显著效果,但需要留意其在低频共振区引起的响应增大情况。 相似文献
14.
气垫平台上装备了大量的电子、电气设备和大功率发射天线,同时,气垫平台的船体与一般舰船相比,在垫态航行时艇体与海水绝缘,电磁兼容十分特殊。天线之间的耦合是无线电系统间电磁干扰的主要传输途径,天线隔离度是分析天线间电磁干扰影响的关键指标,开展天线间隔离度分析对电磁干扰研究十分重要。针对气垫平台船体的特殊性和电磁兼容性特点,基于电磁仿真基本原理,建立了气垫平台电磁模型,采用电磁仿真方法分析计算了天线间隔离度,并分析了气垫平台与海平面连接和不连接时隔离度影响。通过实测进行了验证,为开展总体电磁兼容工程研制提供了技术支撑。 相似文献
15.
16.
Philip J. Valent David K. Young William B. Sawyer Thomas D. Wright 《Journal of Marine Systems》1998,14(3-4)
The Naval Research Laboratory (NRL), with industry and university participation, conducted an assessment of the concept of isolating certain wastes (i.e., sewage sludge, fly ash from municipal incinerators, and contaminated dredged material) on the oceans' abyssal seafloor. In this assessment the advantages, disadvantages, and economic and environmental viability of potential engineering methods for achieving abyssal waste isolation were identified and compared. This paper presents background to the Abyssal Plains Waste Isolation (APWI) Project, describes the characteristics of the waste streams and quantities potentially available for disposal via the abyssal isolation concept, summarizes regulations affecting use of the abyssal seafloor for disposal of wastes, and introduces the technical and scientific premises underlying implementation of the concept. 相似文献
17.
We develop an integrated model for estimating the internal cost of abyssal seafloor waste isolation. The model captures the major economic, engineering, geographic and social factors that influence the management cost for sewage sludge and municipal incinerator ash. Considering five representative metropolitan areas and five proposed abyssal study sites, we apply this model to produce cost estimates for four deep-ocean waste delivery system concepts. The results show that the unit cost depends primarily on regional waste volume, the marine delivery system and transportation distance. Based on available data, the abyssal ocean option may be competitive with present land-based disposal costs in New York City. The option is less competitive in other metropolitan areas. 相似文献
18.
19.
An active two-stage isolation mounting, on which servo-hydraulic system is used as the actuator (secondary vibration source) and a diesel engine is used as primary vibration source, has been built. The upper mass of the mounting is composed of a 495 diesel and an electrical eddy current dynamometer. The lower mass is divided into four small masses to which servo-hydraulic actuator and rubber isolators are attached. According to the periodical characteristics of diesel vibration signals, a multi-point adaptive strategy based on adaptive comb filtered algorithm is applied to active multi-direction coupled vibrations control for the engine. The experimental results demonstrate that a good suppression in the effective range of phase compensation in secondary path (within 100Hz) at different operation conditions is achieved, and verify that this strategy is effective. The features of the active system, the development activities carried out on the system and experimental results are discussed in the paper. 相似文献
20.
浮筏系统隔振性能的功率流评价指标 总被引:1,自引:0,他引:1
文章采用刚度为常数、阻尼随频率变化的Bush单元来模拟实际的5-200Hz的隔振器的垂向机械阻抗特性。通过有限元频率响应计算得到了浮筏隔振系统的结点响应信息,在此基础上采用隔振器机械阻抗方程求得隔振器两端的受力值,进而代入功率流表达式得到了系统的输入输出功率流。对系统输入输出的加速度响应和功率流进行了对比分析,结果表明了采用功率流来评价隔振系统的优劣更能反映隔振系统的实际隔振效果。采用功率流作为隔振系统隔振效果的评价标准是合适的,而且在某些方面要优于采用单一的加速度(速度)响应作为评价指标的评价体系。 相似文献