2010年离岸技术会议(英文)

<正>3–6 May at Reliant Park,Houston,TX. OTC Founded in 1969, the Offshore Technology Conference is the world’s foremost event for the development of offshore resources in     

2015年国际离岸技术会议(OTC 2015)（英文）

正5-8 Houston,Texas USA Call for papersOn behalf of the OTC Board of Directors,the 2015 Program Committee,and the sponsoring organizations,we invite you to submit a paper proposal presenting your technical solutions,innovations,advancements,and knowledge at the largest offshore energy conference in the world.The next conference will take place 4–7 May in Houston,Texas,USA.     

近海技术大会(OTC 2017)（英文）

正1-4 May 2017·NRG Park·Houston,Texas,USA The Offshore Technology Conference(OTC)is where energy professionals meet to exchange ideas and opinions to advance scientific and technical knowledge for offshore resources and environmental matters.OTC is the largest event in the world for the oil and gas industry featuring more than 2,400 exhibitors,and attendees representing 120 countries.     

2018离岸技术大会(OTC)（英文）

<正>30 April–3 May 2018 in Houston,Texas,USA Since its inception in 1969,OTC has provided a forum to present cutting-edge technologies and innovations which have shaped the entire industry and led the way to many dramatic achievements.As the 50th OTC approaches,we have an opportunity to help prepare for a sustainable future.The program committee encourages submissions which will align with the     

EFFICIENT, INTEGRATED TRANSPORTSYSTEM KEY TO PORT’S SUCCESS:Houston Sufficient support infrastructure, carrying capacity needed

Efficient, integrated transport system key to port's success: Houston Sufficient support infrastructure, carrying capacity needed By ALAN DANIELS An efficient, integrated transport system is key to the Port of Vancouver's success. "There are many ways that we can optimize the efficiency and carrying capacity of our transportation infrastructure in Canada: through technology, by working together, by thinking differently." said Captain Gordon Houston, President & CEO of the Vancouver P…     

2016年国际离岸技术会议(OTC 2016)（英文）

正HoustonOTC 2016(Offshore Technology Conference)will be held in Houston's NRG Park from 2-5 May 2016.OTC2016,organised by the SPE(Society of Petroleum Engineers),is the offshore oil and gas industry's foremost event for the development of hydrocarbon resources in the areas of drilling,environmental protection,exploration,production development,innovation and technology.The Offshore Technology Conference and Exhibition(OTC)     

美国墨西哥湾深水管道建设项目成本与安装方法分析（英文）

The offshore pipeline network in the U.S. Gulf of Mexico is the largest and most transparent system in the world. A review of deepwater projects in the region provides insight into construction cost and installation methods and the evolution of contract strategies. Pipeline projects are identified as export systems, infield flowline systems, and combined export and infield systems, and three dozen deepwater pipeline installations from 1980–2014 are described based on Offshore Technology Conference(OTC) and Society of Petroleum Engineers(SPE) industry publications and press release data. Export lines and infield flowlines are equally represented and many projects used a combination of J-lay, S-lay and reel methods with rigid steel, flexible line, and pipe-in-pipe systems. The average 2014 inflation-adjusted cost for pipeline projects based on OTC/SPE publications was $2.76 million/mi and ranged from $520 000/mi to $12.94 million/mi. High cost pipelines tend to be short segments or specialized pipeline. Excluding the two cost endpoints, the majority of projects ranged from $1 to $6 million/mi. The average inflation-adjusted cost to install deepwater pipelines in the U.S. Gulf of Mexico based on available public data is estimated at $3.1 million/mi.     

EFFICIENT, INTEGRATED TRANSPORT SYSTEM KEY TO PORT''''S SUCCESS:Houston Sufficient support infrastructure, carrying capacity needed

An efficient, integrated transport system iskey to the Port of Vancouver s success. "There are many ways that we can optimizethe efficiency and carrying capacity of ourtransportation infrastructure in Canada: throughtechnology, by working together, by thinkingdifferently," said Captain Gordon Houston,President & CEO of the Vancouver Port Authority.     

The use of hydrogen as a fuel for inland waterway units

Escalating apprehension about the harmful effects of widespread use of conventional fossil fuels in the marine field and in internal combustion engines in general, has led to a vast amount of efforts and the directing of large capital investment towards research and development of sustainable alternative energy sources. One of the most promising and abundant of these sources is hydrogen. Firstly, the use of current fossil fuels is. discussed focusing on the emissions and economic sides to emphasize the need for a new, cleaner and renewable fuel with particular reference to hydrogen as a suitable possible alternative. Hydrogen properties, production and storage methods are then reviewed along with its suitability from the economical point of view. Finally, a cost analysis for the use of hydrogen in internal combustion engines is carried out to illustrate the benefits of its use as a replacement for diesel. The outcome of this cost analysis shows that 98% of the capital expenditure is consumed by the equipment, and 68.3% of the total cost of the equipment is spent on the solar photovoltaic cells. The hydrogen plant is classified as a large investment project because of its high initial cost which is about 1 billion US$; but this is justified because hydrogen is produced in a totally green way. When hydrogen is used as a fuel, no harmful emissions are obtained.     

Seismic response of liquid-filled tank with baffles

In thispaper, the effects of a rigid baffle on the seismic response of liquid in a rigid cylindrical tank are evaluated. A baffle is an annular plate which supplies a kind of passive control on the effects of ground excitation. The contained liquid is assumed incompressible, inviscid and has irrotational motion. To estimate the seismic response, the method of superposition of modes has been applied. To analyze the rigid tank response, Laplace＆#39;s equation is considered as the governing equation of the fluid domain, in both time and frequency domains. The boundary element method （BEM） is employed to evaluate the natural modes of liquid in a cylindrical tank. To gain this goal, the fluid domain is divided into two upper and lower parts partitioned by the baffle. Linearized kinematic and dynamic boundary conditions of the free surface of the contained liquid have been considered.     

作用在双圆柱桩上波浪力准确解和有限差分解的比较

The wave force exerted on vertical piles of offshore structures is the main criterion in designing them.In structures with more than one large pile,the influence of piles on each other is one of the most important issues being concerned in past researches.An efficient method for determining the interaction of piles is introduced in present research.First the wave force is calculated by the exact method using the diffraction theory,then in the finite difference numerical method the force is calculated by adding the velocity potentials of each pile and integration of pressure on their surface.The results showed that the ratio of the wave force on each of the double piles to a single pile has a damped oscillation around unity in which the amplitude of oscillation decreases with the increase in the spacing parameter.Also different wave incident directions and diffraction parameters were used and the results showed that the numerical solution has acceptable accuracy when the diffraction parameter is larger than unity.     

Influence of pre-injection control parameters on main-injection fuel quantity for an electronically controlled double-valve fuel injection system of diesel engine

A simulation model of an electronically controlled two solenoid valve fuel injection system for a diesel engine is established in the AMESim environment.The accuracy of the model is validated through comparison with experimental data.The influence of pre-injection control parameters on main-injection quantity under different control modes is analyzed.In the spill control valve mode,main-injection fuel quantity decreases gradually and then reaches a stable level because of the increase in multi-injection dwell time.In the needle control valve mode,main-injection fuel quantity increases with rising multi-injection dwell time;this effect becomes more obvious at high-speed revolutions and large main-injection pulse widths.Pre-injection pulse width has no obvious influence on main-injection quantity under the two control modes;the variation in main-injection quantity is in the range of 1 mm3.     

水动力效率最高的鳗鱼推进器(英文)

It is hypothesized that steady anguilliform swimming motion of aquatic animals is purely reactive such that no net vortex wake is left downstream. This is versus carangiform and tunniform swimming of fish, where vortex streams are shed from tail, fins, and body. But there the animal movements are such to produce partial vortex cancellation downstream in maximizing propulsive efficiency. In anguilliform swimming characteristic of the eel family, it is argued that the swimming motions are configured by the animal such that vortex shedding does not occur at all. However, the propulsive thrust in this case is higher order in the motion amplitude, so that relatively large coils are needed to produce relatively small thrust; the speeds of anguilliform swimmers are less than the carangiform and tunniform, which develop first order thrusts via lifting processes. Results of experimentation on live lamprey are compared to theoretical prediction which assumes the no-wake hypothesis. Two-dimensional analysis is first performed to set the concept. This is followed by three-dimensional analysis using slender-body theory. Slender-body theory has been applied by others in studying anguilliform swimming, as it is ideally suited to the geometry of the lamprey and other eel-like animals. The agreement between this new approach based on the hypothesis of wakeless swimming and the experiments is remarkably good in spite of the physical complexities.     

CHINA''''S SOE REFORM SCALES NEW HEIGHTS

State-owned enterprises (SOEs) in China have stepped out of the mire of the past and the reform of the nation's SOEs is set to deepen. The performance of China's SOEs in 2002 is far better than in 2001. Especially, the achievement was made against the backdrop of a global economic slowdown in 2001 and 2002, when the global trade volume and investment declined. Against such a backdrop, it is not easy     

导流板对弯管流激噪声和流致振动的影响(英文)

The effect of a guide vane installed at the elbow on flow-induced noise and vibration is investigated in the range of Reynolds numbers from 1.70×105 to 6.81×105, and the position of guide vane is determined by publications. The turbulent flow in the piping elbow is simulated with large eddy simulation(LES). Following this, a hybrid method of combining LES and Lighthill's acoustic analogy theory is used to simulate the hydrodynamic noise and sound sources are solved as volume sources in code Actran. In addition, the flow-induced vibration of the piping elbow is investigated based on a fluid-structure interaction(FSI) code. The LES results indicate that the range of vortex zone in the elbow without the guide vane is larger than the case with the guide vane, and the guide vane is effective in reducing flow-induced noise and vibration in the 90° piping elbow at different Reynolds numbers.     

Wave Scattering by Porous Bottom Undulation in a Two Layered Channel

The scattering of plane surface waves by bottom undulations in channel flow consisting of two layers is investigated by assuming that the bed of the channel is composed of porous material. The upper surface of the fluid is bounded by a rigid lid and the channel is unbounded in the horizontal directions. There exists only one wave mode corresponding to an internal wave. For small undulations, a simplified perturbation analysis is used to obtain first order reflection and transmission coefficients in terms of integrals involving the shape function describing the bottom. For sinusoidal bottom undulations and exponentially decaying bottom topography, the first order coefficients are computed. In the case of sinusoidal bottom the first order transmission coefficient is found to vanish identically. The numerical results are depicted graphically in a number of figures.     

采用局部的微分求积法求解激波管问题

The localized differential quadrature (LDQ) method is a numerical technique with high accuracy for solving most kinds of nonlinear problems in engineering and can overcome the difficulties of other methods (such as difference method) to numerically evaluate the derivatives of the functions.Its high efficiency and accuracy attract many engineers to apply the method to solve most of the numerical problems in engineering.However,difficulties can still be found in some particular problems.In the following study,the LDQ was applied to solve the Sod shock tube problem.This problem is a very particular kind of problem,which challenges many common numerical methods.Three different examples were given for testing the robustness and accuracy of the LDQ.In the first example,in which common initial conditions and solving methods were given,the numerical oscillations could be found dramatically;in the second example,the initial conditions were adjusted appropriately and the numerical oscillations were less dramatic than that in the first example;in the third example,the momentum equation of the Sod shock tube problem was corrected by adding artificial viscosity,causing the numerical oscillations to nearly disappear in the process of calculation.The numerical results presented demonstrate the detailed difficulties encountered in the calculations,which need to be improved in future work.However,in summary,the localized differential quadrature is shown to be a trustworthy method for solving most of the nonlinear problems in engineering.     

Special requirements for alumina ceramic of ESG electrode bowl

At present ESG (Electrostatic Suspended Gyro) is the most precise inertia element in the world. The electrode bowl, which has direct effect on the precision of ESG, is a key part to ESG. Through the analysis of the function and characteristic of the electrode bowl in hollow rotor ESG and the present situation of new material development in the world, the alumina ceramic is regarded as the best material for the electrode bowl of hollow rotor ESG. By analyzing the present situation of alumina ceramic in the world, main technique requirements have been put forward for the alumina ceramic of ESG electrode bowl which is also fit for solid rotor ESG.     

船用燃料中芳烃浓度对粒子排放的影响研究（英文）

The fuel sulfur content in marine fuels has been regulated in Sulfur Emission Control Areas(SECAs) since January 2015. However, other fuel characteristics are also believed to have an impact on particle emissions, particularly on the number of particles emitted. This study investigates the impact of the content of aromatics in fuel. To achieve fuel blends with concentrations of aromatics similar to those found in marine fuel oils, i.e. 20%–30% by volume(%vol.), normal diesel oil(4%–5% vol. aromatics) is doped with a mixture of aromatics. Emission measurements are conducted in test-bed engine facilities and particle emissions over a wide size range are analyzed. Results show a decreased number of particles emitted(or not change) with an increase in the aromatic concentration in fuel. This is because there is a reduction in the cetane number of the fuel with an increased aromatic content, which effects the combustion process and results in decreased particle formation. However, when ignition improver is used to increase the cetane number, particle emissions remain at a lower level than for normal diesel oil; thereby emphasizing the presence of other factors in the formation of particles.     

Flow-induced Noise and Vibration Analysis of a Piping Elbow with/without a Guide Vane

The effect of a guide vane installed at the elbow on flow-induced noise and vibration is investigated in the range of Reynolds numbers from 1.70×10^5 to 6.81×10^5, and the position of guide vane is determined by publications. The turbulent flow in the piping elbow is simulated with large eddy simulation （LES）. Following this, a hybrid method of combining LES and Lighthill＇s acoustic analogy theory is used to simulate the hydrodynamic noise and sound sources are solved as volume sources in code Actran. In addition, the flow-induced vibration of the piping elbow is investigated based on a fluid-structure interaction （FSI） code. The LES results indicate that the range of vortex zone in the elbow without the guide vane is larger than the case with the guide vane, and the guide vane is effective in reducing flow-induced noise and vibration in the 90° piping elbow at different Reynolds numbers.