共查询到18条相似文献,搜索用时 875 毫秒
1.
2.
3.
4.
5.
6.
为了提高平台主机减振和隔声效果,以某船用柴油机为研究对象,开展浮筏-隔声罩集成减振隔声方案设计。建立系统有限元模型,计算柴油机额定转速下的振动响应和振级落差,对浮筏隔振性能进行初步评估。通过模型试验,进一步评估了安装浮筏、隔声罩后的减振和隔声效果。结果表明,采用集成减振隔声装置后,柴油机机脚-基座的横向、纵向及垂向的隔振效果明显提高,并且改善了原始单层隔振方案中能量集中频段的噪声,隔声效果显著,设备空气辐射噪声得到了较好的控制。该集成减振隔声方案试验效果明显,可为深水半潜式支持平台主机的减振隔声集成设计提供参考。 相似文献
7.
8.
9.
10.
11.
针对船用浮筏隔振系统,采用有限元分析法,建立平板式和夹层板式两种筏架结构的浮筏隔振系统的有限元分析模型,并估算两种浮筏隔振系统的隔振效果。计算结果表明,夹层板式浮筏隔振系统具有较好的隔振效果,在相同重量的情况下隔振量比平板式浮筏高出3~4dB,为新型筏架结构的研究提供了思路。 相似文献
12.
船舶辅机的隔振设计及船体耦合振动分析 总被引:1,自引:0,他引:1
为了减小船舶的振动与噪声,对某船用空压机组进行了浮筏隔振装置的设计,其中包括隔振参数的确定以及筏体结构的设计等。通过建立隔振系统的有限元模型,分析了该系统的动力学特性,包括振动模态、振动传递率以及对于冲击的响应。为了揭示实船隔振系统的规律,将空压机组浮筏装置的有限元模型拓展到全船,分析了隔振装置装船后的耦合振动模态,讨论了船舶结构的振动对浮筏系统隔振效果以及冲击响应的影响。在此基础上,探讨了提高船舶辅机浮筏隔振系统动力学性能的途径。 相似文献
13.
为了减小船用机械振动向船体结构的传递,常采用浮筏隔振系统对船舶设备进行集中隔振。文章对某船用柴油发电机组进行了隔振设计并研究其效果,采用有限元软件MSC Patran建立了隔振系统的动力学模型。首先计算得到了各阶模态,然后分析了隔振系统参数变化对隔振效果的影响,最后研究了不同激励对瞬态动力学特性的影响。计算结果表明,浮筏隔振系统的设计满足隔振要求,隔振性能及抗冲击性能良好。 相似文献
14.
15.
16.
不同阻尼情况下减振浮筏振动响应计算研究 总被引:1,自引:0,他引:1
提出一种计算减振浮筏系统振动响应的方法,建立浮筏系统力学模型,研究阻尼对系统响应的影响,并以一实际浮筏系统为例,分别使用振型叠加法与数值积分法计算了位移,速度响应及传递至基础的力、所得结果完全一致。 相似文献
17.
FEA for designing of floating raft shock-resistant system 总被引:2,自引:0,他引:2
ZHAOYing-long HELin HUANGYing-yun WANGYu 《船舶与海洋工程学报》2003,2(1):24-29
Choosing the equipment with good shock-resistant performance and taking shock protection measures while designing the onboard settings, the safety of onboard settings can be assured when warships, especially submarine subjected to non-contact underwater explosion, that is, these means can be used to limit the rattlespace (i. e. , the maximum displacement of the equipment relative to the base) and the peak acceleration experienced by the equipment. Using shock-resistant equipments is one of shock protection means. The shock-resistant performance of the shock-resistant equipments should be verified in the design phase of the equipments. The FEA (finite element analysis) software, for example, MSC. NASTRANw, can be used to verify the shock-resistant performance. MSC. PATRAN and MSC. NASTRAN are used for modeling and analyzing the floating raft vibration isolating equipment. The model of the floating raft and the floating raft vibration isolating system are theoretically analyzed and calculated, and the analysis results are in agreement with the test results. The transient response analysis of the system model follows the modal analysis of the floating raft vibration isolating system. And it is used to verify the shock-resistant performance. The analysis and calculation method used in this paper can be used to analyze the shock-resistant performance of onboard shock-resistant equipments. 相似文献
18.
为了探讨浮筏装置在多扰动源下所具有的特性以及隔振设计技术,基于船舶水泵机组隔振浮筏这种多扰动源的系统,利用有限元法数值模拟了隔振系统的模型,分析了多扰动源参数以及空问管系对浮筏隔振系统隔振性能的影响,水泵机组的隔振设计技术以及为了提高隔振性能而应注意的若干方面。分析结果表明:多扰动源激励对系统的隔振性能影响显著,空间管系减弱了系统的隔振性能,在动力设备和管路间使用挠性接管等弹性连接可减小管系的影响。 相似文献