The Downs–Thomson Paradox with responsive transit service

Downs (1962) and Thomson (1977) suggested that highway capacity expansion may produce counterproductive effects on the two-mode (auto and transit) transport system (Downs–Thomson Paradox). This paper investigates the occurrence of this paradox when transit authority can have different economic objectives (profit-maximizing or breakeven) and operating schemes (frequency, fare, or both frequency and fare). For various combinations of economic objectives and operating schemes, the interaction between highway expansion and transit service is explored, as well as its impact on travelers’ mode choices and travel utilities. Further, for each combination, the conditions for occurrence of the Downs–Thomson Paradox are established. We show that the paradox never occurs when transit authority is profit-maximizing, but it is inevitable when the transit authority is running to maximize travelers’ utility while maintaining breakeven. This is because the former transit authority tends to enhance transit service (e.g., raise frequency or reduce fare) when facing an expanded highway; and on the contrary, the latter tends to compromise transit service (e.g., reduce frequency or raise fare). Both analytical and numerical examples are provided to verify the theoretical results.     

The Downs–Thomson paradox with imperfect mode substitutes and alternative transit administration regimes

The Downs–Thomson paradox (D–T paradox) occurs when expansion of a congested and untolled highway undermines scale economies of a competing transit service, leaving users of both modes worse off. The standard analysis of the D–T paradox is based on several stringent assumptions: fixed total travel demand, perfect substitutability between automobile and transit trips, and no transit crowding. This paper re-examines the paradox when these assumptions are relaxed while retaining the usual assumption that there is no congestion interaction between the modes. It also broadens consideration to alternative transit administration regimes. In the standard treatment the transit operator is obliged to cover its costs. In this paper we also study two other regimes: transit profit maximization, and system-wide welfare maximization with no financing constraint. We examine how the transit system operator responds to highway capacity expansion in each regime, and how this affects welfare for drivers and transit users. We show that in all regimes the full price of transit declines only if the full price of driving falls as well. Thus, drivers are more likely to benefit from highway expansion than transit riders. The D–T paradox cannot occur in the profit maximization or unconstrained welfare maximization regimes. In the traditional self-financing regime transit service deteriorates, but the D–T paradox is not inevitable. Numerical analysis suggests that it can occur only when automobile and transit trips are nearly perfect substitutes.     

Modeling schedule recovery processes in transit operations for bus arrival time prediction

Many existing algorithms for bus arrival time prediction assume that buses travel at free‐flow speed in the absence of congestion. As a result, delay incurred at one stop would propagate to downstream stops at the same magnitude. In reality, skilled bus operators often constantly adjust their speeds to keep their bus on schedule. This paper formulates a Markov chain model for bus arrival time prediction that explicitly captures the behavior of bus operators in actively pursuing schedule recovery. The model exhibits some desirable properties in capturing the schedule recovery process. It guarantees provision of the schedule information if the probability of recovering from the current schedule deviation is sufficiently high. The proposed model can be embedded into a transit arrival time estimation model for transit information systems that use both real‐time and schedule information. It also has the potential to be used as a decision support tool to determine when dynamic or static information should be used.     

Hybrid model for prediction of bus arrival times at next station

Effective prediction of bus arrival times is important to advanced traveler information systems (ATIS). Here a hybrid model, based on support vector machine (SVM) and Kalman filtering technique, is presented to predict bus arrival times. In the model, the SVM model predicts the baseline travel times on the basic of historical trips occurring data at given time‐of‐day, weather conditions, route segment, the travel times on the current segment, and the latest travel times on the predicted segment; the Kalman filtering‐based dynamic algorithm uses the latest bus arrival information, together with estimated baseline travel times, to predict arrival times at the next point. The predicted bus arrival times are examined by data of bus no. 7 in a satellite town of Dalian in China. Results show that the hybrid model proposed in this paper is feasible and applicable in bus arrival time forecasting area, and generally provides better performance than artificial neural network (ANN)–based methods. Copyright © 2010 John Wiley & Sons, Ltd.     

Bus arrival time prediction at bus stop with multiple routes

Provision of accurate bus arrival information is vital to passengers for reducing their anxieties and waiting times at bus stop. This paper proposes models to predict bus arrival times at the same bus stop but with different routes. In the proposed models, bus running times of multiple routes are used for predicting the bus arrival time of each of these bus routes. Several methods, which include support vector machine (SVM), artificial neural network (ANN), k nearest neighbours algorithm (k-NN) and linear regression (LR), are adopted for the bus arrival time prediction. Observation surveys are conducted to collect bus running and arrival time data for validation of the proposed models. The results show that the proposed models are more accurate than the models based on the bus running times of single route. Moreover, it is found that the SVM model performs the best among the four proposed models for predicting the bus arrival times at bus stop with multiple routes.     

Using non-real-time Automatic Vehicle Location data to improve bus services

Although real-time Automatic Vehicle Location (AVL) data is being utilised successfully in the UK, little notice has been given to the benefits of historical (non-real-time) AVL data. This paper illustrates how historical AVL data can be used to identify segments of a bus route which would benefit most from bus priority measures and to improve scheduling by highlighting locations at which the greatest deviation from schedule occurs. A new methodology which uses historical AVL data and on-bus passenger counts to calculate the passenger arrival rate at stops along a bus route has been used to estimate annual patronage and the speed of buses as they move between stops. Estimating the patronage at stops using AVL data is more cost-effective than conventional methods (such as surveys at stops which require much more manpower) but retains the benefits of accuracy and stop-specific estimates of annual patronage. The passenger arrival rate can then be used to calculate how long buses spend at stops. If the time buses spend at stops is removed from the total time it takes the bus to traverse a link, the remaining amount of time can be assumed to be the time the bus spends moving and hence the moving speed of the bus can be obtained. It was found that estimation of patronage and the speed of buses as they move between stops using AVL data produced results which were comparable with those obtained by other methods. However the main point to note is that this new method of estimating patronage has the potential to provide a larger and superior data set than is otherwise available, at very low cost.     

Optimizing coordinated transfer with probabilistic vehicle arrivals and passengers' walking time

Supporting efficient connections by synchronizing vehicle arrival time and passengers' walking time at a transfer hub may significantly improve service quality, stimulate demand, and increase productivity. However, vehicle travel times and walking times in urban settings often varies spatially and temporally due to a variety of factors. Nevertheless, the reservation of slack time and/or the justification of vehicle arrival time at the hub may substantially increase the success of transfer coordination. To this end, this paper develops a model that considers probabilistic vehicle arrivals and passengers walking speeds so that the slack time and the scheduled bus arrival time can be optimized by minimizing the total system cost. A case study is conducted in which the developed model is applied to optimize the coordination of multiple bus routes connecting at a transfer station in Xi'an, China. The relationship between decision variables and model parameters, including the mean and the standard deviation of walking time, is explored. It was found that the joint impact of probabilistic vehicle arrivals and passengers' walking time significantly affects the efficiency of coordinated transfer. The established methodology can essentially be applied to any distribution of bus arrival and passenger walking time. Copyright © 2017 John Wiley & Sons, Ltd.     

Optimally combined headway and timetable reliable public transport system

This paper presents a model-based multiobjective control strategy to reduce bus bunching and hence improve public transport reliability. Our goal is twofold. First, we define a proper model, consisting of multiple static and dynamic components. Bus-following model captures the longitudinal dynamics taking into account the interaction with the surrounding traffic. Furthermore, bus stop operations are modeled to estimate dwell time. Second, a shrinking horizon model predictive controller (MPC) is proposed for solving bus bunching problems. The model is able to predict short time-space behavior of public transport buses enabling constrained, finite horizon, optimal control solution to ensure homogeneity of service both in time and space. In this line, the goal with the selected rolling horizon control scheme is to choose a proper velocity profile for the public transport bus such that it keeps both timetable schedule and a desired headway from the bus in front of it (leading bus). The control strategy predicts the arrival time at a bus stop using a passenger arrival and dwell time model. In this vein, the receding horizon model predictive controller calculates an optimal velocity profile based on its current position and desired arrival time. Four different weighting strategies are proposed to test (i) timetable only, (ii) headway only, (iii) balanced timetable - headway tracking and (iv) adaptive control with varying weights. The controller is tested in a high fidelity traffic simulator with realistic scenarios. The behavior of the system is analyzed by considering extreme disturbances. Finally, the existence of a Pareto front between these two objectives is also demonstrated.     

An application-oriented model of passenger waiting time based on bus departure time intervals

This paper develops an application-oriented model to estimate waiting times as a function of bus departure time intervals. Bus stops are classified into Type A and B depending on whether they are connected with urban rail transit systems. Distributions of passenger arrival rates are analyzed based on field data for Beijing. The results indicate that the best fits for the distribution of passenger arrival rates for Type A and B bus stops are the lognormal distribution and gamma distribution, respectively. By analyzing relationships between passenger arrival rates and bus departure time intervals, it is demonstrated that parameters of the passenger arrival rate distribution can be expressed by the average and coefficient of variation of bus departure time intervals in functional relationships. The validation shows that the model provides a reliable estimation of the average passenger waiting time based on readily available bus departure time intervals.     

Evaluating the added-value of online bus arrival prediction schemes

Online predictions of bus arrival times have the potential to reduce the uncertainty associated with bus operations. By better anticipating future conditions, online predictions can reduce perceived and actual passenger travel times as well as facilitate more proactive decision making by service providers. Even though considerable research efforts were devoted to the development of computationally expensive bus arrival prediction schemes, real-world real-time information (RTI) systems are typically based on very simple prediction rules. This paper narrows down the gap between the state-of-the-art and the state-of-the-practice in generating RTI for public transport systems by evaluating the added-value of schemes that integrate instantaneous data and dwell time predictions. The evaluation considers static information and a commonly deployed scheme as a benchmark. The RTI generation algorithms were applied and analyzed for a trunk bus network in Stockholm, Sweden. The schemes are assessed and compared based on their accuracy, reliability, robustness and potential waiting time savings. The impact of RTI on passengers waiting times are compared with those attained by service frequency and regularity improvements. A method which incorporates information on downstream travel conditions outperforms the commonly deployed scheme, leading to a 25% reduction in the mean absolute error. Furthermore, the incorporation of instantaneous travel times improves the prediction accuracy and reliability, and contributes to more robust predictions. The potential waiting time gains associated with the prediction scheme are equivalent to the gains expected when introducing a 60% increase in service frequency, and are not attainable by service regularity improvements.     

Bus arrival time calculation model based on smart card data

Bus arrival time is usually estimated using the boarding time of the first passenger at each station. However, boarding time data are not recorded in certain double-ticket smart card systems. As many passengers usually swipe the card much before their alighting, the first or the average alighting time cannot represent the actual bus arrival time, either. This lack of data creates difficulties in correcting bus arrival times. This paper focused on developing a model to calculate bus arrival time that combined the alighting swiping time from smart card data with the actual bus arrival time by the manual survey data. The model was built on the basis of the frequency distribution and the regression analysis. The swiping time distribution, the occupancy and the seating capacity were considered as the key factors in creating a method to calculate bus arrival times. With 1011 groups of smart card data and 360 corresponding records from a manual survey of bus arrival times, the research data were divided into two parts stochastically, a training set and a test set. The training set was used for the parameter determination, and the test set was used to verify the model’s precision. Furthermore, the regularity of the time differences between the bus arrival times and the card swiping times was analyzed using the “trend line” of the last swiping time distribution. Results from the test set achieved mean and standard error rate deviations of 0.6% and 3.8%, respectively. The proposed model established in this study can improve bus arrival time calculations and potentially support state prediction and service level evaluations for bus operations.     

Development of a probabilistic model to optimize disseminated real‐time bus arrival information for pre‐trip passengers

In the advent of Advanced Traveler Information Systems (ATIS), the total wait time of passengers for buses may be reduced by disseminating real‐time bus arrival times for the next or series of buses to pre‐trip passengers through various media (e.g., internet, mobile phones, and personal digital assistants). A probabilistic model is desirable and developed in this study, while realistic distributions of bus and passenger arrivals are considered. The disseminated bus arrival time is optimized by minimizing the total wait time incurred by pre‐trip passengers, and its impact to the total wait time under both late and early bus arrival conditions is studied. Relations between the optimal disseminated bus arrival time and major model parameters, such as the mean and standard deviation of arrival times for buses and pre‐trip passengers, are investigated. Analytical results are presented based on Normal and Lognormal distributions of bus arrivals and Gumbel distribution of pre‐trip passenger arrivals at a designated stop. The developed methodology can be practically applied to any arrival distributions of buses and passengers.     

Bus control strategies in corridors with signalized intersections

This paper proposes a new dynamic bus control strategy aimed at reducing the negative effects of time-headway variations on route performance, based on real-time bus tracking data at stops. In routes with high demand, any delay of a single vehicle ends up causing an unstable motion of buses and producing the bus bunching phenomena. This strategy controls the cruising speed of buses and considers the extension of the green phase of traffic lights at intersections, when a bus is significantly delayed. The performance of this strategy will be compared to the current static operation technique based on the provision of slack times at holding points. An operational model is presented in order to estimate the effects of each controlling strategy, taking into account the vehicle capacity constraint. Control strategies are assessed in terms of passenger total travel time, operating cost as well as on the coefficient of headway variation. The effects of controlling strategies are tested in an idealized bus route under different operational settings and in the bus route of highest demand in Barcelona by simulation. The results show that the proposed dynamic controlling strategy reduces total system cost (user and agency) by 15–40% as well as the coefficient of headway variation 53–78% regarding the uncontrolled case, providing a bus performance similar to the expected when time disturbance is not presented.     

A reliability‐based traffic assignment model for multi‐modal transport network under demand uncertainty

In densely populated and congested urban areas, the travel times in congested multi‐modal transport networks are generally varied and stochastic in practice. These stochastic travel times may be raised from day‐to‐day demand fluctuations and would affect travelers' route and mode choice behaviors according to their different expectations of on‐time arrival. In view of these, this paper presents a reliability‐based user equilibrium traffic assignment model for congested multi‐modal transport networks under demand uncertainty. The stochastic bus frequency due to the unstable travel time of bus route is explicitly considered. By the proposed model, travelers' route and mode choice behaviors are intensively explored. In addition, a stochastic state‐augmented multi‐modal transport network is adopted in this paper to effectively model probable transfers and non‐linear fare structures. A numerical example is given to illustrate the merits of the proposed model. Copyright © 2012 John Wiley & Sons, Ltd.     

Practical approach for travel time estimation from point traffic detector data

Accurate estimation of travel time is critical to the success of advanced traffic management systems and advanced traveler information systems. Travel time estimation also provides basic data support for travel time reliability research, which is being recognized as an important performance measure of the transportation system. This paper investigates a number of methods to address the three major issues associated with travel time estimation from point traffic detector data: data filling for missing or error data, speed transformation from time‐mean speed to space‐mean speed, and travel time estimation that converts the speeds recorded at detector locations to travel time along the highway segment. The case study results show that the spatial and temporal interpolation of missing data and the transformation to space‐mean speed improve the accuracy of the estimates of travel time. The results also indicate that the piecewise constant‐acceleration‐based method developed in this study and the average speed method produce better results than the other three methods proposed in previous studies. Copyright © 2011 John Wiley & Sons, Ltd.     

基于指定到达追踪间隔的高铁车站接车进路长度研究

确定合理的高铁车站接车进路长度对压缩到达追踪间隔时间有重要意义。本文首先通过构建满足到达追踪间隔时间的高铁车站接车进路长度计算模型,提出了接车进路长度的主要影响因素为由线路限制速度、站前坡坡度、制动力使用系数三因素(简称三因素)所确定的车载设备监控制动距离内列车运行时间。然后,通过对常见的线路限制速度、站前坡坡度、制动力使用系数取值下的车载设备监控制动距离内列车运行时间进行牵引计算仿真,并运用三因素方差分析法分析了三因素的影响显著度,得到了线路限制速度、站前坡坡度对高铁车站接车进路长度影响显著的结论。最后,基于高铁车站接车进路长度计算模型,得到了一组指定到达追踪间隔下的高铁车站接车进路长度表,为高铁车站设计提供思路。     

An empirical study to determine freight travel time at a major port

Abstract

This paper examines the reliability measures of freight travel time on urban arterials that provide access to an international seaport. The findings indicate that the reliability index calculated by the median of travel time, which is less sensitive to extreme values in a highly skewed distribution, is more appropriate. This paper also examines several statistical distributions of travel time to determine the best fit to the data of freight trips. The results of goodness-of-fit tests indicate that the log-logistic is the best statistical function for freight travel time during the midday off-peak period. However, the lognormal distribution represents a better fit to arterials with heavily congested traffic during peak periods. Additionally, travel time prediction models identify the relationships between travel time, speeds and other factors that affect travel time reliability. The analysis suggests that incident-induced delays and speed fluctuations primarily contributed to the unreliability of freight movement on the urban arterials.     

Integrated optimization of bus priority operations in connected vehicle environment

Most previous works associated with transit signal priority merely focus on the optimization of signal timings, ignoring both bus speed and dwell time at bus stops. This paper presents a novel approach to optimize the holding time at bus stops, signal timings, and bus speed to provide priority to buses at isolated intersections. The objective of the proposed model is to minimize the weighted average vehicle delays of the intersection, which includes both bus delay and impact on nearby intersection traffic, ensuring that buses clear these intersections without being stopped by a red light. A set of formulations are developed to explicitly capture the interaction between bus speed, bus holding time, and transit priority signal timings. Experimental analysis is used to show that the proposed model has minimal negative impacts on general traffic and outperforms the no priority, signal priority only, and signal priority with holding control strategies (no bus speed adjustment) in terms of reducing average bus delays and stops. A sensitivity analysis further demonstrates the potential of the proposed approach to be applied to bus priority control systems in real‐time under different traffic demands, bus stop locations, and maximum speed limits. Copyright © 2016 John Wiley & Sons, Ltd.     

Modelling waiting time for passengers transferring from rail to buses

This paper develops a mathematical model to calculate the average waiting time for passengers transferring from rail transit to buses based on the statistical analysis of primary data collected in Beijing. An important part of the average waiting time modelling is to analyse the distributions of passenger arrival rates. It is shown that the lognormal and gamma distributions have the best fit for direct transfer and non-direct transfer passengers, respectively. Subsequently, an average waiting time model for transferring passengers is developed based on passenger arrival rate distributions. Furthermore, case studies are conducted for two scenarios with real and estimated data, resulting in relative errors of ?3.69% and ?3.77%, respectively. Finally, the paper analyses the impacts of bus headway, the headway of rail cars, and the proportion of direct transfer passengers on average waiting time.     

Contrasting the direct use of data from traffic radars and video-cameras with traffic simulation in the estimation of road emissions and PM hotspot analysis

This study investigates the effect of traffic volume and speed data on the simulation of vehicle emissions and hotspot analysis. Data from a microwave radar and video cameras were first used directly for emission modelling. They were then used as input to a traffic simulation model whereby vehicle drive cycles were extracted to estimate emissions. To reach this objective, hourly traffic data were collected from three periods including morning peak (6–9 am), midday (11–2 pm), and afternoon peak (3–6 pm) on a weekday (June 23, 2016) along a high-volume corridor in Toronto, Canada. Traffic volumes were detected by a single radar and two video cameras operated by the Southern Ontario Centre for Atmospheric Aerosol Research. Traffic volume and composition derived from the radar had lower accuracy than the video camera data and the radar performance varied by lane exhibiting poorer performance in the remote lanes. Radar speeds collected at a single point on the corridor had higher variability than simulated traffic speeds, and average speeds were closer after model calibration. Traffic emissions of nitrogen oxides (NOx) and particulate matter (PM₁₀ and PM_2.5) were estimated using radar data as well as using simulated traffic based on various speed aggregation methods. Our results illustrate the range of emission estimates (NO_x: 4.0–27.0 g; PM₁₀: 0.3–4.8 g; PM_2.5: 0.2–1.3 g) for the corridor. The estimates based on radar speeds were at least three times lower than emissions derived from simulated vehicle trajectories. Finally, the PM₁₀ and PM_2.5 near-road concentrations derived from emissions based on simulated speeds were two or three times higher than concentrations based on emissions derived using radar data. Our findings are relevant for project-level emission inventories and PM hot-spot analysis; caution must be exercised when using raw radar data for emission modeling purposes.