Relationships between highway capacity and induced vehicle travel

The theory of induced travel demand asserts that increases in highway capacity will induce additional growth in traffic. This can occur through a variety of behavioral mechanisms including mode shifts, route shifts, redistribution of trips, generation of new trips, and long run land use changes that create new trips and longer trips. The objective of this paper is to statistically test whether this effect exists and to empirically derive elasticity relationships between lane miles of road capacity and vehicle miles of travel (VMT). An analysis of US data on lane mileage and VMT by state is conducted. The data are disaggregated by road type (interstates, arterials, and collectors) as well as by urban and rural classifications. Various econometric specifications are tested using a fixed effect cross-sectional time series model and a set of equations by road type (using Zellner’s seemingly unrelated regression). Lane miles are found to generally have a statistically significant relationship with VMT of about 0.3–0.6 in the short run and between 0.7 and 1.0 in the long run. Elasticities are larger for models with more specific road types. A distributed lag model suggests a reasonable long-term lag structure. About 25% of VMT growth is estimated to be due to lane mile additions assuming historical rates of growth in road capacity. The results strongly support the hypothesis that added lane mileage can induce significant additional travel.     

Enhanced traffic information dissemination to facilitate toll road utilization: a nested logit model of a stated preference survey in Texas

This paper investigates the effects of the provision of traffic information on toll road usage based on a stated preference survey conducted in central Texas. Although many researchers have studied congestion pricing and traffic information dissemination extensively, most of them focused on the effects that these instruments individually produce on transportation system performance. Few studies have been conducted to elaborate on the impacts of traffic information dissemination on toll road utilization. In this study, 716 individuals completed a survey to measure representative public opinions and preferences for toll road usage in support of various traffic information dissemination classified by different modes, contents, and timeliness categories. A nested logit model was developed and estimated to identify the significant attributes of traffic information dissemination, traveler commuting patterns, routing behavior, and demographic characteristics, and analyze their impacts on toll road utilization. The results revealed that the travelers using dynamic message sign systems as their primary mode of receiving traffic information are more likely to choose toll roads. The potential toll road users also indicated their desire to obtain traffic information via internet. Information regarding accident locations, road hazard warnings, and congested roads is frequently sought by travelers. Furthermore, high-quality congested road information dissemination can significantly enhance travelers’ preferences of toll road usage. Specifically the study found that travelers anticipated an average travel time saving of about 11.3 min from better information; this is about 30 % of travelers’ average one-way commuting time. The mean value of the time savings was found to be about $11.82 per hour, close to ½ of the average Austin wage rate. The model specifications and result analyses provide in-depth insights in interpreting travelers’ behavioral tendencies of toll road utilization in support of traffic information. The results are also helpful to shape and develop future transportation toll system and transportation policy.     

A shockwave profile model for traffic flow on congested urban arterials

In this paper a new traffic flow model for congested arterial networks, named shockwave profile model (SPM), is presented. Taking advantage of the fact that traffic states within a congested link can be simplified as free-flow, saturated, and jammed conditions, SPM simulates traffic dynamics by analytically deriving the trajectories of four major shockwaves: queuing, discharge, departure, and compression waves. Unlike conventional macroscopic models, in which space is often discretized into small cells for numerical solutions, SPM treats each homogeneous road segment with constant capacity as a section; and the queuing dynamics within each section are described by tracing the shockwave fronts. SPM is particularly suitable for simulating traffic flow on congested signalized arterials especially with queue spillover problems, where the steady-state periodic pattern of queue build-up and dissipation process may break down. Depending on when and where spillover occurs along a signalized arterial, a large number of queuing patterns may be possible. Therefore it becomes difficult to apply the conventional approach directly to track shockwave fronts. To overcome this difficulty, a novel approach is proposed as part of the SPM, in which queue spillover is treated as either extending a red phase or creating new smaller cycles, so that the analytical solutions for tracing the shockwave fronts can be easily applied. Since only the essential features of arterial traffic flow, i.e., queue build-up and dissipation, are considered, SPM significantly reduces the computational load and improves the numerical efficiency. We further validated SPM using real-world traffic signal data collected from a major arterial in the Twin Cities. The results clearly demonstrate the effectiveness and accuracy of the model. We expect that in the future this model can be applied in a number of real-time applications such as arterial performance prediction and signal optimization.     

Metropolitan sprawl measurement and its impacts on commuting trips and road emissions

This study measures urban form as indicators of metropolitan sprawl and explores its impact on commuting trips and NO_x and CO₂ emissions from road traffic in all metropolitan statistical areas (MSAs) and four groups’ MSAs separated by population in the continental United States. Encompassing all MSAs, the study adds the accessibility factor to four existing factors: density, land use mix, centeredness, and street connectivity. The study establishes multivariate regression models between urban form, commuting trips, and emissions from road traffic while controlling for socioeconomic conditions. The study shows that urban form index and five urban form factors have a statistically significant association with commuting trips, NO_x and CO₂ emissions from road traffic. In four MSA groups as determined by MSA population size, higher values of urban form factors (i.e., lower sprawl) are statistically associated with more walking commuters. On the other hand, higher values of urban form factors are associated with fewer commuting vehicles per household in large MSAs with the moderate effect, a lower average commuting drive time in medium and small MSAs, and more commuters using public transportation in medium and large MSAs. This study provides an urban form index covering all metropolitan areas in the continental United States by adding another urban form factor, and the findings show that urban form factors have different effects on mode choices, drive time, and emission from road traffic depending on the MSA population size.     

Assessing the financial and social costs of public transport in differing operating environments and with endogenous demand

This paper uses a previously developed spreadsheet cost model which simulates public transport modes operated on a 12-km route to analyse the total costs of different passenger demand levels. The previous cost model was a very powerful tool to estimate the social and operator costs for different public transport technologies. However, as the model is strategic, some basic assumptions were made which are relaxed in this paper. First, the speed-flow equation in the original spreadsheet model assumes that speed decreases according to the ratio of the current frequency and the lane capacity which is based on the safety headway without taking into account passenger boardings. However, this may vary in different operating environments. Therefore, the speed-flow equation is improved by moving from a linear equation to a piecewise equation that considers the features of different operating environments. Second, the model assumes that supply is sufficient to meet demand. However, when the level of demand is high for the lower-capacity public transport technologies, passengers may find the incoming vehicle full and therefore, they have to wait more than one service interval. This paper applies queuing theory to investigate the probability of having to wait longer than the expected service headways which will affect the average passenger waiting time. The extra waiting time for each passenger is calculated and applied in the spreadsheet cost model. Third, the original model assumed that demand was externally fixed (exogenous). To evaluate the differences after applying these equations, endogenous demand rather than exogenous demand will be investigated by using the elasticities for passenger waiting time and journey time.     

Modeling speed-flow relationship and merging behavior in work zone merging areas

This paper aims to investigate the speed-flow relationship and drivers’ merging behavior in work zone merging areas. It first proposes lane-based speed-flow models, incorporating traffic conflicts among the lanes. It proceeds to develop a desired merging location model determining where drivers start to consider merging and a binary logit model that is applied to estimate the probabilities that drivers will merge into current adjacent gaps. A merging distance model is also proposed to find the 85th percentile of the merging distance. Finally, real work zone traffic data in Singapore are used to calibrate and evaluate the developed models. The findings show that the speed-flow relationship in the through lane is affected by the merge lane traffic under uncongested circumstances. Satisfactory results indicate that the merging behavioral models can competently predict drivers’ merging behavior and that the merging distance model could provide accurate information for traffic engineers to calculate the merge lane length.     

Road pricing for congestion and accident externalities for mixed traffic of motorcycles and automobiles

Motorcycles play an important role in sharing the trip demand with automobiles for commuting, especially in many cities in Asia. However, the accident cost of a trip by motorcycle is higher than that of an automobile. This study analyzes the road pricing for the congestion and accident externalities of mixed traffic of automobiles and motorcycles. A model for equilibrium trips with no taxation and that for optimal trips with taxation are explored. The model is then applied to the Tucheng City–Banciao City–Taipei central business district corridor in Taipei metropolitan area. The findings in this case study show that the tax for accident externality is larger than that for congestion externality.     

Simulation‐based estimates of delays at freeway work zones

Work zone related traffic delay is an important cost component on freeways with maintenance activities. This study demonstrates that delays may be underestimated by using the deterministic queuing theory. Computer simulation is a valuable approach of estimating delay under a variety of existing and future conditions. However, a single simulation run, which can be quite costly in terms of both computer and analyst time, produces a delay estimate for only one traffic level under one set of conditions. A method is developed in this paper to approximate delays by integrating limited simulation data, obtained from CORSIM and the concept of deterministic queuing theory, while various geometric conditions and time‐varying traffic distribution are considered. A calibrated and validated simulation model that can reflect work zone traffic operations on a segment of Interstate 1–80 in New Jersey is used to generate data for developing the proposed model. The comparison of delays estimated by the deterministic queuing model and the proposed model is conducted, while factors affecting the accuracy of the delay estimates are discussed.     

Effects of queue spillover in networks considering simultaneous departure time and route choices

This paper explores the effects of queue spillover in transportation networks, in the context of dynamic traffic assignment. A model of spatial queue is defined to characterize dynamic traffic flow and queuing formation in network links. Network users simultaneously choose departure time and travel route to minimize the travel cost including journey time and unpunctuality penalty. Using some necessary conditions of the dynamic user equilibrium, dynamic network flows are obtained exactly on some networks with typical structure. Various effects of queue spillover are discussed based on the results of these networks, and some new paradoxes of link capacity expansion have been found as a result of such effects. Analytical and exact results in these typical networks show that ignoring queuing length may generate biased solutions, and the link storage capacity is a very important factor concerning the performance of networks.     

Traffic assignment in a two-dimensional continuous representation of a traffic network with flow-dependent speeds

The work deals with the assignment of traffic to a two-dimensional continuous representation of a traffic network. An important aspect of the treatment is that the reciprocal of the speed on each road in the network is at all times a linear function of the flow on that road. This speed-flow relationship is generalized to two-dimensional space using travel intensities and taking account of road densities, so that there is direct dependence of speeds upon flows at all points regardless of their location. There is also dependence of flows upon speeds at all points because Wardrop's first assignment principle is adopted. That is, for a given O-D pair, journey times on all routes actually used are identical, and less than journey times on all other possible routes. This results in the identification for each O-D pair of an “assignment zone”, an area within which all trips between that O-D pair are made, and beyond which no such trips are made. For a single O-D pair the assignment zone is identified by ?_m, the maximum angular divergence of a path from the straight line between O and D. Paths are then assumed to be bilinear so that for a single O-D pair the assignment zone is a parallelogram. Journey times, speeds, lateral displacement and other related quantities are obtained as functions of the flow Q between O and D. The work is extended to three O-D pairs located at the extremities of an equilateral triangle and four O-D pairs located at the corners of a square. At low flows these two configurations are trivial extensions of the single O-D pair problem because assignment zones do not overlap. At higher flows account is taken of this tendency to overlapping, so that although they do not overlap they do touch, becoming kite-shaped. Origins and destinations are assumed to be at the periphery of small circles of arbitrary radius. The work is inelegant to the extent that it involves a numerical integration but it is possible that this might eventually be circumvented.     

Dynamic network equilibrium for daily activity-trip chains of heterogeneous travelers: application to large-scale networks

Applications of dynamic network equilibrium models have, mostly, considered the unit of traffic demand either as one-way trip, or as multiple independent trips. However, individuals’ travel patterns typically follow a sequence of trips chained together. In this study we aim at developing a general simulation-based dynamic network equilibrium algorithm for assignment of activity-trip chain demand. The trip chain of each individual trip maker is defined by the departure time at origin, sequence of activity destination locations, including the location of their intermediate destinations and their final destination, and activity duration at each of the intermediate destinations. Spatial and temporal dependency of subsequent trips on each other necessitate time and memory consuming calculations and storage of node-to-node time-dependent least generalized cost path trees, which is not practical for very large metropolitan area networks. We first propose a reformulation of the trip-based demand gap function formulation for the variational inequality formulation of the Bi-criterion Dynamic User Equilibrium (BDUE) problem. Next, we propose a solution algorithm for solving the BDUE problem with daily chain of activity-trips. Implementation of the algorithm for very large networks circumvents the need to store memory-intensive node-to-node time-dependent shortest path trees by implementing a destination-based time-dependent least generalized cost path finding algorithm, while maintaining the spatial and temporal dependency of subsequent trips. Numerical results for a real-world large scale network suggest that recognizing the dependency of multiple trips of a chain, and maintaining the departure time consistency of subsequent trips provide sharper drops in gap values, hence, the convergence could be achieved faster (compared to when trips are considered independent of each other).     

System optimum and pricing for the day-long commute with distributed demand,autos and transit

The day-long system optimum (SO) commute for an urban area served by auto and transit is modeled as an auto bottleneck with a capacitated transit bypass. A public agency manages the system’s capacities optimally. Commuters are identical except for the times at which they wish to complete their morning trips and start their evening trips, which are given by an arbitrary joint distribution. They value unpunctuality – their lateness or earliness relative to their wish times – with a common penalty function. They must use the same mode for both trips. Commuters are assigned personalized mode and travel start times that collectively minimize society’s generalized cost for the whole day. This includes unpunctuality penalties, queuing delays, travel times and out-of-pocket costs for users, as well as travel supply costs and externalities for society.It is shown that in a SO solution there can be no queuing and that the set of SO solutions forms a convex set. Furthermore, if the schedule penalty that users suffer due to unpunctuality is separable into morning and evening components, then the set of commuters traveling by the same mode arrive at work and depart from work in the order of their wishes. These orders are in general different in the morning and the evening. It is also shown that there always is a SO solution in which users are at all times, and on both modes, either punctual or flowing at capacity. These problem properties are used to identify search methods, both, for SO solutions and for time-dependent tolls and transit fares that preserve the solutions as Nash equilibriums. In every case studied, these prices exist. They must peak concurrently for the two modes in both periods.In special cases involving only one mode, only one period or concentrated demand the solution to the complete problem decomposes by period conditional on the number of transit users, and this facilitates the solution. In these cases the day-long SO cost is the sum of the SO costs for the two peaks considered separately. However, this is not true in general – the solution obtained by combining the two single-period solutions can be infeasible. When this happens, the optimum day-long cost will exceed the sum of the single-period costs. The discrepancy is about 40% of the total schedule penalty for an example representing a large city. Thus, to develop realistic policies the day-long problem must be addressed head on. An approximate method that yields closed form formulas for the case with uniformly distributed wishes is presented.     

Solving the User Optimum Privately Owned Automated Vehicles Assignment Problem (UO-POAVAP): A model to explore the impacts of self-driving vehicles on urban mobility

Interest in vehicle automation has been growing in recent years, especially with the very visible Google car project. Although full automation is not yet a reality there has been significant research on the impacts of self-driving vehicles on traffic flows, mainly on interurban roads. However, little attention has been given to what could happen to urban mobility when all vehicles are automated. In this paper we propose a new method to study how replacing privately owned conventional vehicles with automated ones affects traffic delays and parking demand in a city. The model solves what we designate as the User Optimum Privately Owned Automated Vehicles Assignment Problem (UO-POAVAP), which dynamically assigns family trips in their automated vehicles in an urban road network from a user equilibrium perspective where, in equilibrium, households with similar trips should have similar transport costs. Automation allows a vehicle to travel without passengers to satisfy multiple household trips and, if needed, to park itself in any of the network nodes to benefit from lower parking charges. Nonetheless, the empty trips can also represent added congestion in the network. The model was applied to a case study based on the city of Delft, the Netherlands. Several experiments were done, comparing scenarios where parking policies and value of travel time (VTT) are changed. The model shows good equilibrium convergence with a small difference between the general costs of traveling for similar families. We were able to conclude that vehicle automation reduces generalized transport costs, satisfies more trips by car and is associated with increased traffic congestion because empty vehicles have to be relocated. It is possible for a city to charge for all street parking and create free central parking lots that will keep total transport costs the same, or reduce them. However, this will add to congestion as traffic competes to access those central nodes. In a scenario where a lower VTT is experienced by the travelers, because of the added comfort of vehicle automation, the car mode share increases. Nevertheless this may help to reduce traffic congestion because some vehicles will reroute to satisfy trips which previously were not cost efficient to be done by car. Placing the free parking in the outskirts is less attractive due to the extra kilometers but with a lower VTT the same private vehicle demand would be attended with the advantage of freeing space in the city center.     

A kinematic wave approach to traffic statics and dynamics in a double-ring network

Recently there has been much interest in understanding macroscopic fundamental diagrams of stationary road networks. However, there lacks a systematic method to define and solve stationary states in a road network with complex junctions. In this study we propose a kinematic wave approach to defining, analyzing, and simulating static and dynamic traffic characteristics in a network of two ring roads connected by a 2 × 2 junction, which can be either an uninterrupted interchange or a signalized intersection. This study is enabled by recently developed macroscopic junction models of general junctions. With a junction model based on fair merging and first-in-first-out diverging rules, we first define and solve stationary states and then derive the macroscopic fundamental diagram (MFD) of a stationary uninterrupted network. We conclude that the flow-density relationship of the uninterrupted double-ring network is not unique for high average network densities (i.e., when one ring becomes congested) and unveil the existence of infinitely many stationary states that can arise with a zero-speed shockwave. From simulation results with a corresponding Cell Transmission Model, we verify that all stationary states in the MFD are stable and can be reached, but show that randomness in the retaining ratio of each ring drives the network to more symmetric traffic patterns and higher flow-rates. Furthermore we model a signalized intersection as two alternate diverge junctions and demonstrate that the signalized double-ring network can reach asymptotically periodic traffic patterns, which are therefore defined as “stationary” states in signalized networks. With simulations we show that the flow-density relation is well defined in such “stationary” states, and asymptotic traffic patterns can be impacted by signal cycle lengths and retaining ratios. But compared with uninterrupted interchanges, signalized intersections lead to more asymmetric traffic patterns, lower flow-rates, and even gridlocks when the average density is higher than half of the jam density. The results are consistent between this study and existing studies, but the network kinematic wave model, with appropriate junction models, is mathematically tractable and physically meaningful. It has offered a more complete picture regarding the number and type of stationary states, their stability, and MFD in freeway and signalized networks.     

Junction interactions and monotonicity in traffic assignment

We consider the traffic equilibrium problem when the travel demand is inelastic and stationary in time. Junction interactions, which abound in urban road networks, are permitted. We prove that the set of equilibria (solutions to the assignment problem) is convex when certain monotonicity and continuity conditions are statisfied at each junction.     

Traffic generated by mixed-use developments—A follow-up 31-region study

This study aims to improve a previously-developed methodology for predicting the traffic impacts of mixed-use developments (MXDs). In 31 diverse metropolitan regions across the United States, we collected consistent regional household travel survey data and computed built environment characteristics—D variables—of MXDs. Multilevel modeling (MLM) was employed to predict the probability of trips captured internally within MXDs, walking on internal trips, and travel mode choice on external trips, by trip purpose. Larger, denser, mixed-use, and more walkable MXDs show a larger share of trips internally, compared with conventional suburban developments. Those MXDs with good access to transit, employment, and destinations also show higher levels of walking, biking, and transit shares on external trips, thus helping to reduce traffic impacts on the external road network. Perhaps the most impressive finding is that well-designed MXDs have walk shares of more than 50 percent on internal trips. A k-fold cross-validation supports the robustness of our analyses.     

A theory and implications on dynamic marginal cost

This paper extends the conventional static marginal cost analysis to the dynamic one based on the time-dependent queueing analysis at a bottleneck. First, the supply function is reformulated so as to incorporate dynamically congestion phenomena. And, the marginal cost is shown to be more closely related to the duration of congestion rather than the personal cost, since a slight change of demand at one time affects an entire traffic condition thereafter. Next, the analysis is extended so as to include the departure time choice using previous departure time choice theory. Several implications such as road pricing schemes and ramp control strategies are also discussed.     

Traffic assignment by trip type using volume restraint and link restraint for application in small urban areas

This research involved the development of a new traffic assignment model consisting of a set of procedures for an urbanized area with a population of 172,000. Historical, social, and economic data were used as input to conventional trip generation and trip distribution models to produce a trip table for network assignment. This fixed table was divided into three trip types: external-external trips, external-internal trips, and internal-internal trips. The methodology used to develop the new traffic assignment model assigned each of the trip types by varying the diversion of trips from the minimum path. External-external trips were assigned on a minimum path routing and external-internal trips were assigned with a slight diversion from the minimum path. Internal-internal trips were assigned with more diversion than external-internal trips and adjusted by utilizing iterative volume restraint and incremental link restraint. A statistical analysis indicated that assigning trips by trip types using trip diversion and volume and link restraint produces a significant improvement in the accuracy of the assigned traffic volumes.     

A dynamic approach to road freight flows modeling in Spain

This paper presents an innovative approach to analyzing road vehicle freight traffic that uses a dynamic panel data specification derived from a gravity model. This dynamic approach, which has recently been employed in international goods trade models in lieu of the traditional static specification, is applied to the case of Spain using data for the countrys 15 NUTS-3 regions between 1999 and 2009. Using the system general method of moments approach, we obtained significant evidence that the flow of vehicles carrying commodities by road has a strong persistence effect when controlling for unobserved heterogeneity. We also found that the quality of road transport infrastructure has a significant impact on vehicle trips. According to our findings, we suggest that this type of specification be employed in distribution models in which fixed effects and lags of the dependent variable are included to account for unobserved heterogeneity and persistence effects, respectively.     

A dynamic model system of household car ownership,trip generation,and modal split: model development and simulation experiment

A dynamic model of household car ownership and mode use is developed and applied to demand forecasting. The model system consists of three interrelated components: car ownership, mechanized trip generation, and modal split. The level of household car ownership is represented as a function of household attributes and mobility measures from the preceding observation time point using an ordered-response probit model. The trip generation model predicts the weekly number of trips made by household members using car or public transit, and the modal split model predicts the fraction of trips that are made by public transit. Household car ownership is a major determinant in the latter two model components. A simulation experiment is conducted using sample households from the Dutch National Mobility Panel data set and applying the model system to predict household car ownership and mode use under different scenarios on future household income, employment, and drivers’ license holding. Policy implications of the simulation results are discussed.