Estimating bus run times for new limited-stop service using archived AVL and APC data

In recent years, several transit agencies have been trying to be more competitive with the automobile to attract choice riders. Transit agencies can only be competitive if they can provide services that are reliable, have a short access and egress time, and have run times that are comparable to automobiles. Several transit agencies try to be competitive through offering faster service, such as limited-stop (express) bus service. This study uses AVL and APC data, in addition to a disaggregate data obtained from a travel behavior survey, to select stops and estimate run times for a new limited-stop service that will run parallel to a heavily used bus route (67 Saint-Michel) in Montréal, Canada. Three different scenarios are developed based on theory and practice to select stops to be incorporated in the new limited service. The time savings for each scenario are then evaluated as a range and a fourth scenario is developed. A limited-stop service is recommended based on selecting stops serving both directions of the route, major activity points and stop spacing. This study shows that implementing a limited-stop service would yield substantial time savings for both, the new limited service and the existing regular service running in parallel.     

Evaluation of transit operations: data applications of Tri-Met's automated Bus Dispatching System

In this paper, archived Automatic Vehicle Location and Automatic Passenger Counter data are used to evaluate actual bus running time variation in relation to scheduled service for Tri-Met, the transit provider for the Portland, Oregon metropolitan area. Given observed variation in running times, scheduled recovery times are found to be generally (though not universally) excessive. This results in an under-investment of resources in revenue service relative to non-revenue service. Analysis of trip level data reveals that bus operators are an important source of running time variation after controlling for such factors as route design, time of day and direction of service, and passenger activity.     

Ridership estimation procedure for a transit corridor with new bus rapid transit service

Ridership estimation is a critical step in the planning of a new transit route or change in service. Very often, when a new transit route is introduced, the existing routes will be modified, vehicle capacities changed, or service headways adjusted. This has made ridership forecasts for the new, existing, and modified routes challenging. This paper proposes and demonstrates a procedure that forecasts the ridership of all transit routes along a corridor when a new bus rapid transit (BRT) service is introduced and existing regular bus services are adjusted. The procedure uses demographic data along the corridor, a recent origin–destination survey data, and new and existing transit service features as inputs. It consists of two stages of transit assignment. In the first stage, a transit assignment is performed with the existing transit demand on the proposed BRT and existing bus routes, so that adjustments to the existing bus services can be identified. This transit assignment is performed iteratively until there is no adjustment in transit services. In the second stage, the transit assignment is carried out with the new BRT and adjusted regular bus services, but incorporates a potential growth in ridership because of the new BRT service. The final outputs of the procedure are ridership for all routes and route segments, boarding and alighting volumes at all stops, and a stop‐by‐stop trip matrix. The proposed ridership estimation procedure is applicable to a new BRT route with and without competing regular bus routes and with BRT vehicles traveling in dedicated lanes or in mixed traffic. The application of the proposed procedure is demonstrated via a case study along the Alameda Corridor in El Paso, Texas. Copyright © 2015 John Wiley & Sons, Ltd.     

A simulation of transit bus emissions along an urban corridor: Evaluating changes under various service improvement strategies

This study investigates the impacts of transit improvement strategies on bus emissions along a busy corridor in Montreal, Canada. The local transit provider, Société de Transport de Montréal, has implemented a number of strategies which include the use of smart cards, limited-stop (express bus) service, and reserved bus lanes along this corridor. Using data collected on-board for instantaneous speeds and stop-level ridership, we estimated bus emissions of greenhouse gases and other pollutants at three levels: road segment, bus-stop, and per passenger. A regression of segment-level emissions against a number of explanatory variables reveals that reserved bus lanes and express bus service reduce emissions significantly. On the other hand, smart card use reduces idling emissions compared to other fare payment methods. Our findings are of most relevance for transit planners who are seeking to implement different strategies to reduce emissions and improve transit performance.     

Investigating the impact of stochastic vehicle arrivals to optimal stop spacing and headway for a feeder bus route

Stop spacing and service frequency (i.e., the inverse of headway) are key elements in transit service planning. The trade‐offs between increasing accessibility and reducing travel time, which affect transit system performance, need to be carefully evaluated. The objective of this study is to optimize stop spacing and headway for a feeder bus route, considering the relationship between the variance of inter‐arrival time (VIAT), which yields the minimum total cost (including user and operator costs). A solution algorithm, called successive substitution, is adapted to efficiently search for the optimal solutions. In a numerical example, the developed model is applied to planning a feeder bus route in Newark, New Jersey. The results indicate that the optimal stop spacing should be longer that those suggested by previous studies where the impact of VIAT was ignored. Reducing VIAT via certain operational control strategies (i.e., holding/stop‐skipping, transit signal priority) may shorten stop spacing and improve accessibility. Copyright © 2014 John Wiley & Sons, Ltd.     

Analyzing urban bus service reliability at the stop, route, and network levels

Improving the reliability of bus service has the potential to increase the attractiveness of public transit to current and prospective riders. An understanding of service reliability is necessary to develop strategies that help transit agencies provide better services. However, few studies have been conducted analyzing bus reliability in the metropolis of China. This paper presents an in-depth analysis of service reliability based on bus operational characteristics in Beijing. Three performance parameters, punctuality index based on routes (PIR), deviation index based on stops (DIS), and evenness index based on stops (EIS), are proposed for the evaluation of bus service reliability. Reliability involves routes, stops, punctuality, deviation, and evenness. The relationship among the three parameters is discussed using a numerical example. Subsequently, through a sampling survey of bus lines in Beijing, service reliability at the stop, route, and network levels are estimated. The effects of route length, headway, the distance from the stop to the origin terminal, and the use of exclusive bus lanes are also analyzed. The results indicate low service reliability for buses in Beijing and a high correlation between service reliability and route length, headway, distance from the stop to the origin terminal, and the provision of exclusive bus lanes.     

Analyzing transit service reliability using detailed data from automatic vehicular locator systems

The widespread adoption of automated vehicle location (AVL) systems and automatic passenger counters (APCs) in the transit industry has opened new venues in operations and system monitoring. In 2005, Metro Transit, Minnesota, implemented AVL system and partially implemented APC technologies. To date there has been little effort to employ the collected data in evaluating transit performance. This research uses such data to assess performance issues along a cross‐town route in the Metro Transit system. We generate a series of visual and analytical analyses to predict run time, schedule adherence and reliability of the transit route at two scales: the time point segment and the route level to demonstrate ways of identifying causes of decline in reliability levels. The analytical models show that while headways are maintained, schedule revisions are needed to improve run time and schedule adherence. Finally, the analysis suggests that many scheduled stops along this route are underutilized and recommends stop consolidation as a tool to decrease variability of service through concentrating passenger demand along a fewer number of stops. Copyright © 2010 John Wiley & Sons, Ltd.     

Statistical inference on transit route‐level origin–destination flows using automatic passenger counter data

We consider inferring transit route‐level origin–destination (OD) flows using large amounts of automatic passenger counter (APC) boarding and alighting data based on a statistical formulation. One critical problem is that we need to enumerate the OD flow matrices that are consistent with the APC data for each bus trip to evaluate the model likelihood function. The OD enumeration problem has not been addressed satisfactorily in the literature. Thus, we propose a novel sampler to avoid the need to enumerate OD flow matrices by generating them recursively from the first alighting stop to the last stop of the bus route of interest. A Markov chain Monte Carlo (MCMC) method that incorporates the proposed sampler is developed to simulate the posterior distributions of the OD flows. Numerical investigations on an operational bus route under a realistic OD structure demonstrate the superiority of the proposed MCMC method over an existing MCMC method and a state‐of‐the‐practice method. Copyright © 2015 John Wiley & Sons, Ltd.     

Optimal control of headway variation on transit routes

Headway control strategies have been proposed as methods for correcting transit service irregularities and thereby reducing passenger wait times at stops. This paper addresses a particular strategy which can be implemented on high frequency routes (headways under 10–12 minutes), in which buses are held at a control stop to a threshold headway. An algorithm is developed which yields the optimal control stop location and optimal threshold headway with respect to a system wait function. The specification of the wait function is based on the development of several empirical models, including a headway variation model and an average delay time model at control stops. A conclusion is reached that the headway variation does not increase linearly along a route, a common assumption made in many previous studies. Furthermore, the location of the optimal control stop and threshold value are sensitive to the passenger boarding profile, as expected. The algorithm itself appears to have practical application to conventional transit operations.     

快速公交系统站台停靠时间模型研究

快速公交系统停靠站台停车延误是影响快速公交运行车速的关键因素之一,因此构建快速公交系统站台停靠时间模型是提升快速公交服务水平的基础理论研究。本文选取盐城BRT-1号线的起始站、中途站、客流离散站等三类站点为研究对象,综合运用数理统计法与数据挖掘法,构建快速公交系统站台停靠时间模型,并对该模型的合理性进行了检验。研究表明:盐城市BRT-1号线三类站台的快速公交车辆停靠时间与上下车乘客人数呈线性关系,即快速公交车辆停靠时间与上下车乘客人数的检验参数R2均大于0.8。     

The allocation of buses in heavily utilized networks with overlapping routes

Many transit systems outside North America are characterized by networks with extensively overlapping routes and buses frequently operating at, or close to, capacity. This paper addresses the problem of allocating a fleet of buses between routes in this type of system; a problem that must be solved recurrently by transit planners. A formulation of the problem is developed which recognizes passenger route choice behavior, and seeks to minimize a function of passenger wait time and bus crowding subject to constraints on the number of buses available and the provision of enough capacity on each route to carry all passengers who would select it. An algorithm is developed based on the decomposition of the problem into base allocation and surplus allocation components. The base allocation identifies a feasible solution using an (approx.) minimum number of buses. The surplus allocation is illustrated for the simple objective of minimizing the maximum crowding level on any route. The bus allocation procedure developed in this paper has been applied to part of the Cairo bus system in a completely manual procedure, and is proposed to be the central element of a short-range bus service planning process for that city.     

Joint optimization of a rail transit line and its feeder bus system

A model is developed for jointly optimizing the characteristics of a rail transit route and its associated feeder bus routes in an urban corridor. The corridor demand characteristics are specified with irregular discrete distributions which can realistically represent geographic variations. The total cost (supplier plus user cost) of the integrated bus and rail network is minimized with an efficient iterative method that successively substitutes variable values obtained through classical analytic optimization. The optimized variables include rail line length, rail station spacings, bus headways, bus stop spacings, and bus route spacing. Computer programs are designed for optimization and sensitivity analysis. The sensitivity of the transit service characteristics to various travel time and cost parameters is discussed. Numerical examples are presented for integrated transit systems in which the rail and bus schedules may be coordinated.     

Bus running time prediction using a statistical pattern recognition technique

Abstract

Given that real-time bus arrival information is viewed positively by passengers of public transit, it is useful to enhance the methodological basis for improving predictions. Specifically, data captured and communicated by intelligent systems are to be supplemented by reliable predictive travel time. This paper reports a model for real-time prediction of urban bus running time that is based on statistical pattern recognition technique, namely locally weighted scatter smoothing. Given a pattern that characterizes the conditions for which bus running time is being predicted, the trained model automatically searches through the historical patterns which are the most similar to the current pattern and on that basis, the prediction is made. For training and testing of the methodology, data retrieved from the automatic vehicle location and automatic passenger counter systems of OC Transpo (Ottawa, Canada) were used. A comparison with other methodologies shows enhanced predictive capability.     

Real-time control of buses for schedule coordination at a terminal

Recently, bus transit operators have begun to adopt technologies that enable bus locations to be tracked from a central location in real-time. Combined with other technologies, such as automated passenger counting and wireless communication, it is now feasible for these operators to execute a variety of real-time strategies for coordinating the movement of buses along their routes. This paper compares control strategies that depend on technologies for communication, tracking and passenger counting, to those that depend solely on local information (e.g., time that a bus arrived at a stop, and whether other connecting buses have also arrived). We also develop methods to forecast bus arrival times, which are most accurate for lines with long headways, as is usually the case in timed transfer systems. These methods are tested in simulations, which demonstrate that technology is most advantageous when the schedule slack is close to zero, when the headway is large, and when there are many connecting buses.     

User perspectives in public transport timetable optimisation

The present paper deals with timetable optimisation from the perspective of minimising the waiting time experienced by passengers when transferring either to or from a bus. Due to its inherent complexity, this bi-level minimisation problem is extremely difficult to solve mathematically, since timetable optimisation is a non-linear non-convex mixed integer problem, with passenger flows defined by the route choice model, whereas the route choice model is a non-linear non-continuous mapping of the timetable. Therefore, a heuristic solution approach is developed in this paper, based on the idea of varying and optimising the offset of the bus lines. Varying the offset for a bus line impacts the waiting time passengers experience at any transfer stop on the bus line.In the bi-level timetable optimisation problem, the lower level is a transit assignment calculation yielding passengers’ route choice. This is used as weight when minimising waiting time by applying a Tabu Search algorithm to adapt the offset values for bus lines. The updated timetable then serves as input in the following transit assignment calculation. The process continues until convergence.The heuristic solution approach was applied on the large-scale public transport network in Denmark. The timetable optimisation approach yielded a yearly reduction in weighted waiting time equivalent to approximately 45 million Danish kroner (9 million USD).     

A comparison of accuracy and cost of attribute data in analysis of transit service areas using GIS

User oriented transit service is designed to meet the particular needs of a selected group of travelers. Transit Routes are located to provide convenient linkages between user's origin and destination in such a way that out-of-vehicle time, such as access and transfer time, is minimized. Planning transit routes requires understanding demographics, land use and travel patterns in an area. The dynamic nature of these systems necessitates regular review and analysis to insure that the transit system continues to meet the needs of the area it serves. Geographic Information Systems (GIS) provide a flexible framework for planning and analyzing transit routes and stops. Socioeconomic, demographic, housing, land use, and traffic data may be modeled in a GIS to identify efficient and effective corridors to locate routes. Part of the route location and analysis problem requires estimating population within the service area of a route. A route's service area is defined using walking distance or travel time. The problem of identifying service areas for park and ride or auto/bus users is not considered here, but assumed analogous to walk/bus trips. This paper investigates the accuracy and costs associated with the use of different attribute data bases to perform service area analysis for transit routes using GIS. A case study is performed for Logan, Utah, where a new fixed route service is operated. The case study illustrates the use of census data, postal data, data collected from aerial photographs, and data collected during a field survey using the network area analysis technique for transit service area analysis. This comparison allows us to describe the amount of error introduced by various spatial modeling techniques of data bases representing a variety of aggregation levels.     

Scheduling considerations for a branching transit route

This paper addresses the impacts of different scheduling alternatives for a branching transit route. It examines different schedule alternatives that might be used to optimize the route performance in terms of the passenger traveling time distributed among branch passengers and trunk‐line passengers. The schedule alternatives considered include transit vehicle allocation to different branches, offset shifting across vehicles on different branches, and vehicle holding (slack time) in the transit vehicle schedule. With these variables, several vehicle schedules are devised and examined based on a wide variety of possible passenger boarding scenarios using deterministic service models. Test outcomes provide general conclusions about the performance of the strategies. Vehicle assignment leading to even headways among branches is generally preferred for the case of low passenger demand. However, when passenger demand is high, or the differences between the passenger demands on branches are significant, unequal vehicle assignment will be helpful to improve the overall route performance. Holding, as a proactive strategy in scheduling, has the potential to be embedded into the schedule as a type of slack time, but needs further evidence and study to determine the full set of conditions where it may be beneficial. Offset shifting does not show sufficient evidence to be an efficient strategy to improve route performance in the case of low or high passenger demand.     

Optimal design of a short‐turning strategy considering seat availability

We develop a methodology to optimize the schedule coordination of a full‐stop service pattern and a short‐turning service pattern on a bus route. To capture the influence of bus crowding and seat availability on passengers' riding experience, we develop a Markov model to describe the seat‐searching process of a passenger and an approach to estimate the transition probabilities of the Markov model. An optimization model that incorporates the Markov model is proposed to design the short‐turning strategy. The proposed model minimizes the total cost, which includes operational cost, passengers' waiting time cost and passengers' in‐vehicle travel time cost. Algorithm is developed to produce optimal values of the decision variables. The proposed methodology is evaluated in a case study. Compared with methodologies that ignore the effect of bus crowding, the proposed methodology could better balance bus load along the route and between two service patterns, provide passengers with better riding experience and reduce the total cost. In addition, it is shown that the optimal design of the short‐turning strategy is sensitive to seat capacity. Copyright © 2016 John Wiley & Sons, Ltd.     

Bus arrival time prediction at bus stop with multiple routes

Provision of accurate bus arrival information is vital to passengers for reducing their anxieties and waiting times at bus stop. This paper proposes models to predict bus arrival times at the same bus stop but with different routes. In the proposed models, bus running times of multiple routes are used for predicting the bus arrival time of each of these bus routes. Several methods, which include support vector machine (SVM), artificial neural network (ANN), k nearest neighbours algorithm (k-NN) and linear regression (LR), are adopted for the bus arrival time prediction. Observation surveys are conducted to collect bus running and arrival time data for validation of the proposed models. The results show that the proposed models are more accurate than the models based on the bus running times of single route. Moreover, it is found that the SVM model performs the best among the four proposed models for predicting the bus arrival times at bus stop with multiple routes.     

Where Is My Bus? Impact of mobile real-time information on the perceived and actual wait time of transit riders

In order to attract more choice riders, transit service must not only have a high level of service in terms of frequency and travel time but also must be reliable. Although transit agencies continuously work to improve on-time performance, such efforts often come at a substantial cost. One inexpensive way to combat the perception of unreliability from the user perspective is real-time transit information. The OneBusAway transit traveler information system provides real-time next bus countdown information for riders of King County Metro via website, telephone, text-messaging, and smart phone applications. Although previous studies have looked at traveler response to real-time information, few have addressed real-time information via devices other than public display signs. For this study, researchers observed riders arriving at Seattle-area bus stops to measure their wait time while asking a series of questions, including how long they perceived that they had waited.The study found that for riders without real-time information, perceived wait time is greater than measured wait time. However, riders using real-time information do not perceive their wait time to be longer than their measured wait time. This is substantiated by the typical wait times that riders report. Real-time information users say that their average wait time is 7.5 min versus 9.9 min for those using traditional arrival information, a difference of about 30%. A model to predict the perceived wait time of bus riders was developed, with significant variables that include the measured wait time, an indicator variable for real-time information, an indicator variable for PM peak period, the bus frequency in buses per hour, and a self-reported typical aggravation level. The addition of real-time information decreases the perceived wait time by 0.7 min (about 13%).A critical finding of the study is that mobile real-time information reduces not only the perceived wait time, but also the actual wait time experienced by customers. Real-time information users in the study wait almost 2 min less than those arriving using traditional schedule information. Mobile real-time information has the ability to improve the experience of transit riders by making the information available to them before they reach the stop.