A merging–giveway interaction model of cars in a merging section: a game theoretic analysis

In many past studies dealing with traffic phenomena in merging or weaving sections, only the influence of through traffic on the behavior of a merging car is considered in the analysis. It is, however, often seen that a through car, which runs on the most outside lane, takes a cooperative motion for the merging car called “giving way” by moving to the adjacent lane. That is, both the merging car and the through car affect one another. Because their influence is not independent from one another, it should be jointly treated in the analysis as “interaction”. This behavior is typical in merging sections, and is a dominant factor forming the traffic phenomena in a section of this type. This study develops a game theoretical model to describe the traffic behavior of a pair of merging and through cars, while explicitly considering the interaction between them. Both the merging and through cars attempt to take the best actions for themselves by forecasting the other’s action, respectively. Such a behavior is modeled as a two-person non-zero-sum non-cooperative game. Through a case study with data analysis of videotaped observation, the proposed model can be used to obtain an understanding of traffic behavior at on-ramp merging sections. ©     

Exploring the effects of cooperative adaptive cruise control on highway traffic flow using microscopic traffic simulation

This paper examines the impact of having cooperative adaptive cruise control (CACC) embedded vehicles on traffic flow characteristics of a multilane highway system. The study identifies how CACC vehicles affect the dynamics of traffic flow on a complex network and reduce traffic congestion resulting from the acceleration/deceleration of the operating vehicles. An agent-based microscopic traffic simulation model (Flexible Agent-based Simulator of Traffic) is designed specifically to examine the impact of these intelligent vehicles on traffic flow. The flow rate of cars, the travel time spent, and other metrics indicating the evolution of traffic congestion throughout the lifecycle of the model are analyzed. Different CACC penetration levels are studied. The results indicate a better traffic flow performance and higher capacity in the case of CACC penetration compared to the scenario without CACC-embedded vehicles.     

Comparing traffic state estimators for mixed human and automated traffic flows

This article addresses the problem of modeling and estimating traffic streams with mixed human operated and automated vehicles. A connection between the generalized Aw Rascle Zhang model and two class traffic flow motivates the choice to model mixed traffic streams with a second order traffic flow model. The traffic state is estimated via a fully nonlinear particle filtering approach, and results are compared to estimates obtained from a particle filter applied to a scalar conservation law. Numerical studies are conducted using the Aimsun micro simulation software to generate the true state to be estimated. The experiments indicate that when the penetration rate of automated vehicles in the traffic stream is variable, the second order model based estimator offers improved accuracy compared to a scalar modeling abstraction. When the variability of the penetration rate decreases, the first order model based filters offer similar performance.     

Analysis of Work Zone Traffic Behavior for Planning Applications

Abstract

Understanding work zone traffic behavior is important for the planning and operation of work zones. The objective of this paper is to develop a mathematical model of work zone traffic flow elements by analyzing the relationships between speed, flow, and density that can be used to estimate the capacity of work zones. Traffic flow data were collected from 22 work zone sites on South Carolina interstate highways. The scatter plots of the collected data demonstrate that the relationship between speed and density does not follow Greenshields’ linear model. A non-linear hyperbolic model was developed to describe the relationship between speed and density. Using this model the capacity of a work zone was estimated to be 1550 passenger cars per hour for 2-lane to 1-lane closures. Adjustments to this capacity value to consider other types of vehicle as well as the work zone intensity are provided. Highway agencies can use this estimated capacity along with anticipated traffic demand to schedule work zone operations to avoid long periods of over-saturation.

The tapered approach to work zone lane closures used by South Carolina is similar to methods used in work zones throughout the world. The authors believe that the methodology described in this paper for modeling work zone traffic as well as estimating work zone capacity is transferable to other countries. The conversion of actual volumes to passenger car equivalents may have to be modified due to the significant differences in traffic makeup between the United States and other countries.     

Using connected vehicle technology to improve the efficiency of intersections

Information from connected vehicles, such as the position and speed of individual vehicles, can be used to optimize traffic operations at an intersection. This paper proposes such an algorithm for two one-way-streets assuming that only a certain percentage of cars are equipped with this technology. The algorithm enumerates different sequences of cars discharging from the intersection to minimize the objective function. Benefits of platooning (multiple cars consecutively discharging from a queue) and signal flexibility (adaptability to demand) are also considered. The goal is to gain insights about the value (in terms of delay savings) of using connected vehicle technology for intersection control.Simulations are conducted for different total demand values and demand ratios to understand the effects of changing the minimum green time at the signal and the penetration rate of connected cars. Using autonomous vehicle control systems, the signal could rapidly change the direction of priority without relying on the reaction of drivers. However, without this technology a minimum green time is necessary. The results of the simulations show that a minimum green time increases the delay only for the low and balanced demand scenarios. Therefore, the value of using cars with autonomous vehicle control can only be seen at intersections with this kind of demand patterns, and could result in up to 7% decrease in delay. On the other hand, using information from connected vehicles to better adapt the traffic signal has proven to be indeed very valuable. Increases in the penetration rate from 0% up to 60% can significantly reduce the average delay (in low demand scenarios a decrease in delay of up to 60% can be observed). That being said, after a penetration rate of 60%, while the delays continue to decrease, the rate of reduction decreases and the marginal value of information from communication technologies diminishes. Overall, it is observed that connected vehicle technology could significantly improve the operation of traffic at signalized intersections, at least under the proposed algorithm.     

A stochastic model of traffic flow: Theoretical foundations

In a variety of applications of traffic flow, including traffic simulation, real-time estimation and prediction, one requires a probabilistic model of traffic flow. The usual approach to constructing such models involves the addition of random noise terms to deterministic equations, which could lead to negative traffic densities and mean dynamics that are inconsistent with the original deterministic dynamics. This paper offers a new stochastic model of traffic flow that addresses these issues. The source of randomness in the proposed model is the uncertainty inherent in driver gap choice, which is represented by random state dependent vehicle time headways. A wide range of time headway distributions is allowed. From the random time headways, counting processes are defined, which represent cumulative flows across cell boundaries in a discrete space and continuous time conservation framework. We show that our construction implicitly ensures non-negativity of traffic densities and that the fluid limit of the stochastic model is consistent with cell transmission model (CTM) based deterministic dynamics.     

A hybrid deep learning based traffic flow prediction method and its understanding

Deep neural networks (DNNs) have recently demonstrated the capability to predict traffic flow with big data. While existing DNN models can provide better performance than shallow models, it is still an open issue of making full use of spatial-temporal characteristics of the traffic flow to improve their performance. In addition, our understanding of them on traffic data remains limited. This paper proposes a DNN based traffic flow prediction model (DNN-BTF) to improve the prediction accuracy. The DNN-BTF model makes full use of weekly/daily periodicity and spatial-temporal characteristics of traffic flow. Inspired by recent work in machine learning, an attention based model was introduced that automatically learns to determine the importance of past traffic flow. The convolutional neural network was also used to mine the spatial features and the recurrent neural network to mine the temporal features of traffic flow. We also showed through visualization how DNN-BTF model understands traffic flow data and presents a challenge to conventional thinking about neural networks in the transportation field that neural networks is purely a “black-box” model. Data from open-access database PeMS was used to validate the proposed DNN-BTF model on a long-term horizon prediction task. Experimental results demonstrated that our method outperforms the state-of-the-art approaches.     

A platoon based cooperative eco-driving model for mixed automated and human-driven vehicles at a signalised intersection

The advancements in communication and sensing technologies can be exploited to assist the drivers in making better decisions. In this paper, we consider the design of a real-time cooperative eco-driving strategy for a group of vehicles with mixed automated vehicles (AVs) and human-driven vehicles (HVs). The lead vehicles in the platoon can receive the signal phase and timing information via vehicle-to-infrastructure (V2I) communication and the traffic states of both the preceding vehicle and current platoon via vehicle-to-vehicle (V2V) communication. We propose a receding horizon model predictive control (MPC) method to minimise the fuel consumption for platoons and drive the platoons to pass the intersection on a green phase. The method is then extended to dynamic platoon splitting and merging rules for cooperation among AVs and HVs in response to the high variation in urban traffic flow. Extensive simulation tests are also conducted to demonstrate the performance of the model in various conditions in the mixed traffic flow and different penetration rates of AVs. Our model shows that the cooperation between AVs and HVs can further smooth out the trajectory of the latter and reduce the fuel consumption of the entire traffic system, especially for the low penetration of AVs. It is noteworthy that the proposed model does not compromise the traffic efficiency and the driving comfort while achieving the eco-driving strategy.     

Evacuation traffic dynamics

Historically, evacuation models have relied on values of road capacity that are estimated based on Highway Capacity Manual methods or those observed during routine non-emergency conditions. The critical assumption in these models is that capacity values and traffic dynamics do not differ between emergency and non-emergency conditions. This study utilized data collected during Hurricanes Ivan (2004), Katrina (2005) and Gustav (2008) to compare traffic characteristics during mass evacuations with those observed during routine non-emergency operations. From these comparisons it was found that there exists a consistent and fundamental difference between traffic dynamics under evacuation conditions and those under routine non-emergency periods. Based on the analysis, two quantities are introduced: “maximum evacuation flow rates” (MEFR) and “maximum sustainable evacuation flow rates” (MSEFR). Based on observation, the flow rates during evacuations were found to reach a maximum value of MEFR followed by a drop in flow rate to a MSEFR that was able to be sustained over several hours, or until demand dropped below that necessary to completely saturate the section. It is suggested that MEFR represents the true measure of the “capacity”. These findings are important to a number of key policy-shaping factors that are critical to evacuation planning. Most important among these is the strong suggestion of policy changes that would shift away from the use of traditional capacity estimation techniques and toward values based on direct observation of traffic under evacuation conditions.     

Real-time queue length estimation for congested signalized intersections

How to estimate queue length in real-time at signalized intersection is a long-standing problem. The problem gets even more difficult when signal links are congested. The traditional input–output approach for queue length estimation can only handle queues that are shorter than the distance between vehicle detector and intersection stop line, because cumulative vehicle count for arrival traffic is not available once the detector is occupied by the queue. In this paper, instead of counting arrival traffic flow in the current signal cycle, we solve the problem of measuring intersection queue length by exploiting the queue discharge process in the immediate past cycle. Using high-resolution “event-based” traffic signal data, and applying Lighthill–Whitham–Richards (LWR) shockwave theory, we are able to identify traffic state changes that distinguish queue discharge flow from upstream arrival traffic. Therefore, our approach can estimate time-dependent queue length even when the signal links are congested with long queues. Variations of the queue length estimation model are also presented when “event-based” data is not available. Our models are evaluated by comparing the estimated maximum queue length with the ground truth data observed from the field. Evaluation results demonstrate that the proposed models can estimate long queues with satisfactory accuracy. Limitations of the proposed model are also discussed in the paper.     

On some experimental features of car-following behavior and how to model them

We have carried out car-following experiments with a 25-car-platoon on an open road section to study the relation between a car’s speed and its spacing under various traffic conditions, in the hope to resolve a controversy surrounding this fundamental relation of vehicular traffic. In this paper we extend our previous analysis of these experiments, and report new experimental findings. In particular, we reveal that the platoon length (hence the average spacing within a platoon) might be significantly different even if the average velocity of the platoon is essentially the same. The findings further demonstrate that the traffic states span a 2D region in the speed-spacing (or density) plane. The common practice of using a single speed-spacing curve to model vehicular traffic ignores the variability and imprecision of human driving and is therefore inadequate. We have proposed a car-following model based on a mechanism that in certain ranges of speed and spacing, drivers are insensitive to the changes in spacing when the velocity differences between cars are small. It was shown that the model can reproduce the experimental results well.     

Recognition and tracking of spatial–temporal congested traffic patterns on freeways

The two models FOTO (Forecasting of Traffic Objects) and ASDA (Automatische Staudynamikanalyse: Automatic Tracking of Moving Traffic Jams) for the automatic recognition and tracking of congested spatial–temporal traffic flow patterns on freeways are presented. The models are based on a spatial–temporal traffic phase classification made in the three-phase traffic theory by Kerner. In this traffic theory, in congested traffic two different phases are distinguished: “wide moving jam” and “synchronized flow”. The model FOTO is devoted to the identification of traffic phases and to the tracking of synchronized flow. The model ASDA is devoted to the tracking of the propagation of moving jams. The general approach and the different extensions of the models FOTO and ASDA are explained in detail. It is stressed that the models FOTO and ASDA perform without any validation of model parameters in different environmental and traffic conditions. Results of the online application of the models FOTO and ASDA at the TCC (Traffic Control Center) of Hessen near Frankfurt (Germany) are presented and evaluated.     

Automated cars: Queue discharge at signalized intersections with ‘Assured-Clear-Distance-Ahead’ driving strategies

This study addresses the impacts of automated cars on traffic flow at signalized intersections. We develop and subsequently employ a deterministic simulation model of the kinematics of automated cars at a signalized intersection approach, when proceeding forward from a stationary queue at the beginning of a signal phase. In the discrete-time simulation, each vehicle pursues an operational strategy that is consistent with the ‘Assured Clear Distance Ahead’ criterion: each vehicle limits its speed and spacing from the vehicle ahead of it by its objective of not striking it, regardless of whether or not the future behavior of the vehicle ahead is cooperative. The simulation incorporates a set of assumptions regarding the values of operational parameters that will govern automated cars’ kinematics in the immediate future, which are sourced from the relevant literature.We report several findings of note. First, under a set of assumed ‘central’ (i.e. most plausible) parameter values, the time requirement to process a standing queue of ten vehicles is decreased by 25% relative to human driven vehicles. Second, it was found that the standard queue discharge model for human–driven cars does not directly transfer to queue discharge of automated vehicles. Third, a wet roadway surface may result in an increase in capacity at signalized intersections. Fourth, a specific form of vehicle-to-vehicle (V2V) communications that allows all automated vehicles in the stationary queue to begin moving simultaneously at the beginning of a signal phase provides relatively minor increases in capacity in this analysis. Fifth, in recognition of uncertainty regarding the value of each operational parameter, we identify (via scenario analysis, calculation of arc elasticities, and Monte-Carlo methods) the relative sensitivity of overall traffic flow efficiency to the value of each operational parameter.This study comprises an incremental step towards the broader objective of adapting standard techniques for analyzing traffic operations to account for the capabilities of automated vehicles.     

Traffic flow on signalized streets

This paper considers a signalized street of uniform width and blocks of various lengths. Its signals are pretimed in an arbitrary pattern, and traffic on it behaves as per the kinematic-wave/variational theory with a triangular fundamental diagram. It is shown that the long run average flow on the street when the number of cars on the street (i.e. the street’s density) is held constant is given by the solution of a linear program (LP) with a finite number of variables and constraints. This defines a point on the street’s macroscopic fundamental diagram. For the homogeneous special case where the block lengths and signal timings are identical, all the LP constraints but one are redundant and the result has a closed form. In this case, the LP recipe matches and simplifies the so-called “method of cuts”. This establishes that the method of cuts is exact for homogeneous problems. However, in the more realistic inhomogeneous case the difference between the two methods can be arbitrarily large.The paper uses the LP method to obtain the macroscopic fundamental diagrams arising under four different traffic coordination schemes for streets with four different block length configurations. It is found that the best scheme depends on the prevailing density. Curiously, the popular scheme in which all the traffic green phases are started synchronously wins only in rare circumstances. Its performance is particularly underwhelming when the street’s blocks are long. The paper also presents density-aware numerical methods to optimize the signal offsets for 1-way and 2-way streets. For 1-way streets operated with a common cycle the method reduces to a simple graphical construction . In this case the resulting flow matches the flow that would arise if all of the street’s intersections except one with the shortest green phase had been eliminated.     

Automated vehicles: exploring possible consequences of government (non)intervention for congestion and accessibility

ABSTRACT

Academic research on automated vehicles (AVs) has to date been dominated by the fields of engineering and computer science. Questions of how this potentially transformative technology should be governed remain under-researched and tend to concentrate on governing the technology’s early development. We respond in this paper by exploring the possible longer-term effect of government (lack of) intervention.

The paper tests the hypothesis that a “laissez-faire” governance approach is likely to produce less desirable outcomes in a scenario of mass uptake of AVs than would a well-planned set of government interventions. This is done using two prominent themes in transport policy – traffic flow and accessibility – in a scenario of high market penetration of Level-5 automated vehicles in capitalist market economies. The evidence used is drawn from a literature review and from the findings of a set of workshops with stakeholders.

We suggest that a laissez-faire approach will lead to an increase in traffic volume as a result of a growing population of “drivers” and a probable increase in kilometres driven per passenger. At the same time, the hoped-for increases in network efficiency commonly claimed are not guaranteed to come about without appropriate government intervention. The likely consequence is an increase in congestion. And, with respect to accessibility, it is likely that the benefits of AVs will be enjoyed by wealthier individuals and that the wider impacts of AV use (including sprawl) may lead to a deterioration in accessibility for those who depend on walking, cycling or collective transport.

We consider the range of possible government intervention in five categories: Planning/land-use; Regulation/policy; Infrastructure/technology; Service provision; and Economic instruments. For each category, we set out a series of interventions that might be used by governments (at city, region or state level) to manage congestion or protect accessibility in the AV scenario described. Many of these (e.g. road pricing) are already part of the policy mix but some (e.g. ban empty running of AVs) would be new. We find that all interventions applicable to the management of traffic flow would also be expected to contribute to the management of accessibility; we define a small number of additional interventions aimed at protecting the accessibility of priority groups.

Our general finding is that the adoption of a package of these interventions could be expected to lead to better performance against generic traffic-flow and accessibility objectives than would a laissez-faire approach, though questions of extent of application remain.

In our conclusions, we contrast laissez-faire with both anticipatory governance and “precautionary” governance and acknowledge the political difficulty associated with acting in the context of uncertainty. We point out that AVs do not represent the first emerging technology to offer both opportunities and risks and challenge governments at all levels to acknowledge the extent of their potential influence and, in particular, to examine methodically the options available to them and the potential consequences of pursuing them.     

A network level connectivity robustness measure for connected vehicle environments

This study introduces a new CONnectivity ROBustness model (CONROB) to assess vehicle-to-vehicle communication in connected vehicle (CV) environments. CONROB is based on Newton’s universal law of gravitation and accounts for multiple factors affecting the connectivity in CV environments such as market penetration, wireless transmission range, spatial distribution of vehicles relative to each other, the spatial propagation of the wireless signal, and traffic density. The proposed methodology for the connectivity robustness calculation in CONROB accounts for the Link Expiration Time (LET) and the Route Expiration Time (RET) that are reflected in the stability of links between each two adjacent vehicles and the expiration time of communication routes between vehicles. Using a 117 sq-km (45-square mile) network in Washington County, located west of Portland city, Oregon, a microscopic simulation model (VISSIM) was built to verify CONROB model. A total of 45 scenarios were simulated for different traffic densities generated from five different traffic demand levels, three levels of market penetration (5%, 15%, and 25%), and three transmission range values [76 (250), 152 (500), and 305 (1000) m (ft)]. The simulation results show that the overall robustness increases as the market penetration increases, given the same transmission range, and relative traffic density. Similarly, the overall connectivity robustness increases as the relative traffic density increases for the same market penetration. More so, the connectivity robustness becomes more sensitive to the relative traffic density at higher values of transmission range and market penetration. Multiple regression analysis was conducted to show the significant effect of relative traffic density, transmission range, and market penetration on the robustness measure. The results of the study provide an evidence of the ability of the model to capture the effect of the different factors on the connectivity between vehicles, which provides a viable tool for assessing CV environments.     

Fine-tuning ADAS algorithm parameters for optimizing traffic safety and mobility in connected vehicle environment

Under the Connected Vehicle environment where vehicles and road-side infrastructure can communicate wirelessly, the Advanced Driver Assistance Systems (ADAS) can be adopted as an actuator for achieving traffic safety and mobility optimization at highway facilities. In this regard, the traffic management centers need to identify the optimal ADAS algorithm parameter set that leads to the optimization of the traffic safety and mobility performance, and broadcast the optimal parameter set wirelessly to individual ADAS-equipped vehicles. Once the ADAS-equipped drivers implement the optimal parameter set, they become active agents that work cooperatively to prevent traffic conflicts, and suppress the development of traffic oscillations into heavy traffic jams. Measuring systematic effectiveness of this traffic management requires am analytic capability to capture the quantified impact of the ADAS on individual drivers’ behaviors and the aggregated traffic safety and mobility improvement due to such an impact. To this end, this research proposes a synthetic methodology that incorporates the ADAS-affected driving behavior modeling and state-of-the-art microscopic traffic flow modeling into a virtually simulated environment. Building on such an environment, the optimal ADAS algorithm parameter set is identified through a multi-objective optimization approach that uses the Genetic Algorithm. The developed methodology is tested at a freeway facility under low, medium and high ADAS market penetration rate scenarios. The case study reveals that fine-tuning the ADAS algorithm parameter can significantly improve the throughput and reduce the traffic delay and conflicts at the study site in the medium and high penetration scenarios. In these scenarios, the ADAS algorithm parameter optimization is necessary. Otherwise the ADAS will intensify the behavior heterogeneity among drivers, resulting in little traffic safety improvement and negative mobility impact. In the high penetration rate scenario, the identified optimal ADAS algorithm parameter set can be used to support different control objectives (e.g., safety improvement has priority vs. mobility improvement has priority).     

A day-to-day route flow evolution process towards the mixed equilibria

This study investigates a travelers’ day-to-day route flow evolution process under a predefined market penetration of advanced traveler information system (ATIS). It is assumed that some travelers equipped with ATIS will follow the deterministic user equilibrium route choice behavior due to the complete traffic information provided by ATIS, while the other travelers unequipped with ATIS will follow the stochastic user equilibrium route choice behavior. The interaction between these two groups of travelers will result in a mixed equilibrium state. We first propose a discrete day-to-day route flow adjustment process for this mixed equilibrium behavior by specifying the travelers’ route adjustment principle and adjustment ratio. The convergence of the proposed day-to-day flow dynamic model to the mixed equilibrium state is then rigorously demonstrated under certain assumptions upon route adjustment principle and adjustment ratio. In addition, without affecting the convergence of the proposed day-to-day flow dynamic model, the assumption concerning the adjustment ratio is further relaxed, thus making the proposed model more appealing in practice. Finally, numerical experiments are conducted to illustrate and evaluate the performance of the proposed day-to-day flow dynamic model.     

Modeling the information flow propagation wave under vehicle-to-vehicle communications

Vehicle-to-vehicle (V2V) communications under the connected vehicle context have the potential to provide new paradigms to enhance the safety, mobility and environmental sustainability of surface transportation. Understanding the information propagation characteristics in space and time is a key enabler for V2V-based traffic systems. Most existing analytical models assume instantaneous propagation of information flow through multi-hop communications. Such an assumption ignores the spatiotemporal relationships between the traffic flow dynamics and V2V communication constraints. This study proposes a macroscopic two-layer model to characterize the information flow propagation wave (IFPW). The traffic flow propagation is formulated in the lower layer as a system of partial differential equations based on the Lighthill-Whitham-Richards model. Due to their conceptual similarities, the upper layer adapts and modifies a spatial Susceptible-Infected epidemic model to describe information dissemination between V2V-equipped vehicles using integro-differential equations. A closed-form solution is derived for the IFPW speed under homogeneous conditions. The IFPW speed is numerically determined for heterogeneous conditions. Numerical experiments illustrate the impact of traffic density and market penetration of V2V-equipped vehicles on the IFPW speed. The proposed model can capture the spatiotemporal relationships between the traffic and V2V communication layers, and aid in the design of novel information propagation strategies to manage traffic conditions under V2V-based traffic systems.