A comparative study of the emissions by road maintenance works and the disrupted traffic using life cycle assessment and micro-simulation

Life cycle assessment is being accepted by the road industry to measure such key environmental impacts as the energy consumption and carbon footprint of its materials and laying processes. Previous life cycle studies have indicated that the traffic vehicles account for the majority of fuel consumption and emissions from a road. Contractors and road agencies are looking for road maintenance works that have the least overall environmental impact considering both the roadwork itself and the disrupted traffic. We review life cycle assessment studies and describe the development of a model for pavement construction and maintenance, detailing the methodology and data sources. The model is applied to an asphalt pavement rehabilitation project in the UK, and the micro-simulation program VISSIM is used to model the traffic on that road section. The simulation results are fed into a traffic emissions model and emissions from the roadwork and the traffic are compared. The additional fuel consumption and emissions by the traffic during the roadwork are significant. This indicates that traffic management at road maintenance projects should be included in the life cycle assessment analysis of such work.     

Traffic modelling in system boundary expansion of road pavement life cycle assessment

This paper uses a case study of a UK inter-urban road, to explore the impact of extending the system boundary of road pavement life cycle assessment (LCA) to include increased traffic emissions due to delays during maintenance. Some previous studies have attempted this but have been limited to hypothetical scenarios or simplified traffic modelling, with no validation or sensitivity analysis. In this study, micro-simulation modelling of traffic was used to estimate emissions caused by delays at road works, for several traffic management options. The emissions were compared to those created by the maintenance operation, estimated using an LCA model. In this case study, the extra traffic emissions caused by delays at road works are relatively small, compared to those from the maintenance process, except for hydrocarbon emissions. However, they are generally close to, or above, the materiality threshold recommended in PAS2050 for estimating carbon footprints, and reach 5–10% when traffic flow levels are increased (hypothetically) or when traffic management is imposed outside times of lowest traffic flow. It is recommended, therefore, that emissions due to traffic disruption at road works should be included within the system boundary of road pavement LCA and carbon footprint studies and should be considered in developing guidelines for environmental product declarations of road pavement maintenance products and services.     

Greenhouse gas reduction potential of advanced traffic control

Reducing greenhouse gas (GHG) emissions from transportation in the context of the climate change issue and the associated Kyoto Agreement of 1997 is a challenge. Since urban transportation is a major contributor to greenhouse gases, measures are required to reduce these emissions. Given that during peak periods, road vehicles propelled by petroleum fuel‐based internal combustion engines produce a high level of GHG emissions due to stop and go operations, measures to improve traffic flow can play an effective mitigation role. This paper describes a simulation‐based methodology and a case study for the quantification of GHG emission reduction owing to advanced traffic control systems.     

Minimizing CO2e emissions by setting a road toll

The main purpose of this paper is to develop a bi-level pricing model to minimize the CO₂e emissions and the total travel time in a small road network. In the lower level of the model, it is assumed that users of the road network find a dynamic user equilibrium which minimizes the total costs of those in the system. For the higher level of the model, different road toll strategies are applied in order to minimize the CO₂e emissions. The model has been applied to an illustrative example. It shows the effects on traffic flows, revenues, total time and CO₂e emissions for different numbers of servers collecting tolls and different pricing strategies over a morning peak traffic period. The results show that the CO₂e emissions produced can be significantly affected by the number of servers and the type of toll strategy employed. The model is also used to find the best toll strategy when there is a constraint on the revenue that is required to be raised from the toll and how this affects the emissions produced. Further runs compare strategies to minimize the CO₂e emissions with those that minimize total travel time in the road system. In the illustrative example, the results for minimizing CO₂e emissions are shown to be similar to the results obtained from minimizing the total travel time.     

Road transport and climate change: Stepping off the greenhouse gas

Transport is Australia’s third largest and second fastest growing source of greenhouse gas (GHG) emissions. The road transport sector makes up 88% of total transport emissions and the projected emissions increase from 1990 to 2020 is 64%. Achieving prospective emission reduction targets will pose major challenges for the road transport sector. This paper investigates two targets for reducing Australian road transport greenhouse gas emissions, and what they might mean for the sector: emissions in 2020 being 20% below 2000 levels; and emissions in 2050 being 80% below 2000 levels. Six ways in which emissions might be reduced to achieve these targets are considered. The analysis suggests that major behavioural and technological changes will be required to deliver significant emission reductions, with very substantial reductions in vehicle emission intensity being absolutely vital to making major inroads in road transport GHG emissions.     

中国道路交通碳排放研究进展分析

道路交通是造成气候变化的主要碳排放来源之一。目前针对道路交通碳排放量测量和减排效果的定量评估方面仍然存在较大挑战。综述了道路交通碳排放测量方法,将道路交通碳减排措施分为经济、技术和行政三类,根据角色定位总结了影响交通碳排放的需求、供应和环境三方面的主要因素。发现不同测量方法得出的碳排放量差异较大,且各种方法的准确性和适用范围也存在较大差异。目前的碳减排措施目标针对性不够强,且缺乏对政策效果的定量研究。亟需在未来研究中规范道路交通碳排放量的统计口径和误差标准,明确各交通主体的减排责任,将更多研究工作集中在减排措施效果的量化上。     

A carbon footprint analysis of railway sleepers in the United Kingdom

This paper provides an assessment of the lifecycle Greenhouse Gas (GHG) emissions associated with the four most common sleeper (railroad tie or cross-tie in North America) types present in the UK rail network. It estimates the embodied material, process and transport emissions linked with the lifecycle activities of construction, relay/renewal and end-of-life of these variants at low and high traffic tonnage. The analysis suggests that at low traffic loads, the softwood sleepers perform the best over the whole simulated-period. At high traffic loads, the concrete sleepers outperform all other variants in terms of lifecycle CO₂e emissions, followed by hardwood, softwood and steel. Regardless of the scenario examined, the steel sleepers perform the worst due to the carbon intensive nature of their manufacturing process. This performance gap is amplified at high traffic loads, as their service life is excessively compromised. The analysis reveals that the end-of-life pathway of timber is a critical determinant of its footprint. Results suggest that the impact of disposing of these sleepers results in their footprint being magnified. Nevertheless, if a minimum of 50% follows the combustion pathway with subsequent heat recuperation, then a GHG reduction potential of between 11% and 18% of their footprint is feasible. From a whole-lifecycle cost lens, for higher tonnage routes, the choice of concrete sleepers results in considerable financial savings. If the infrastructure manager was to install sleepers with stiff under sleeper pads (USPs), it may achieve additional economic and GHG savings, with potential for increasing the latter using recycled carbon-neutral USPs.     

Cost-effectiveness of reductions in greenhouse gas emissions from High-Speed Rail and urban transportation projects in California

A rising trend in state and federal transportation finance is to invest capital dollars into projects which reduce greenhouse gas (GHG) emissions. However, a key metric for comparing projects, the cost-effectiveness of GHG emissions reductions, is highly dependent on the cost-benefit methodology employed in the analysis. Our analysis comparing California High-Speed Rail and three urban transportation projects shows how four different accounting framings bring wide variations in cost per metric tonne of GHG emissions reduced. In our analysis, life-cycle GHG emissions are joined with full cost accounting to better understand the benefits of cap-and-trade investments. Considering only public subsidy for capital, none of the projects appear to be a cost-effective means to reduce GHG emissions (i.e., relative to the current price of GHG emissions in California’s cap-and-trade program at $12.21 per tonne). However, after adjusting for the change in private costs users incur when switching from the counterfactual mode (automobile or aircraft) to the mode enabled by the project, all investments appear to reduce GHG emissions at a net savings to the public. Policy and decision-makers who consider only the capital cost of new transportation projects can be expected to incorrectly assess alternatives and indirect benefits (i.e., how travelers adapt to the new mass transit alternative) should be included in decision-making processes.     

The limits of partial life cycle assessment studies in road construction practices: A case study on the use of hydrated lime in Hot Mix Asphalt

Extensive published literature shows that hydrated lime improves Hot Mix Asphalt (HMA) durability. Its impact on the environmental impact of HMA has not been investigated. This paper presents a comparative Life Cycle Assessment (LCA) for the use of HMA without hydrated lime (classical HMA) and with hydrated lime (modified HMA) for the lifetime of a highway. System boundaries cover the life cycle from cradle-to-grave, meaning extraction of raw materials to end of life of the road. The main assumptions were: 1. Lifetime of the road 50 years; 2. Classical HMA with a life span of 10 years, maintenance operations every 10 years; 3. Modified HMA with an increase in the life span by 25%, maintenance operations every 12.5 years. For the lifetime of the road, modified HMA has the lowest environmental footprint compared to classical HMA with the following benefits: 43% less primary total energy consumption resulting in 23% lower emissions of greenhouse gases. Partial LCAs focusing only on the construction and/or maintenance phase should be used with caution since they could lead to wrong decisions if the durability and the maintenance scenarios differ. Sustainable construction technologies should not only consider environmental impact as quantified by LCA, but also economic and social impacts as well. Avoiding maintenance steps means less road works, fewer traffic jams and hence less CO₂ emissions.     

Help or hindrance? The travel,energy and carbon impacts of highly automated vehicles

Experts predict that new automobiles will be capable of driving themselves under limited conditions within 5–10 years, and under most conditions within 10–20 years. Automation may affect road vehicle energy consumption and greenhouse gas (GHG) emissions in a host of ways, positive and negative, by causing changes in travel demand, vehicle design, vehicle operating profiles, and choices of fuels. In this paper, we identify specific mechanisms through which automation may affect travel and energy demand and resulting GHG emissions and bring them together using a coherent energy decomposition framework. We review the literature for estimates of the energy impacts of each mechanism and, where the literature is lacking, develop our own estimates using engineering and economic analysis. We consider how widely applicable each mechanism is, and quantify the potential impact of each mechanism on a common basis: the percentage change it is expected to cause in total GHG emissions from light-duty or heavy-duty vehicles in the U.S. Our primary focus is travel related energy consumption and emissions, since potential lifecycle impacts are generally smaller in magnitude. We explore the net effects of automation on emissions through several illustrative scenarios, finding that automation might plausibly reduce road transport GHG emissions and energy use by nearly half – or nearly double them – depending on which effects come to dominate. We also find that many potential energy-reduction benefits may be realized through partial automation, while the major energy/emission downside risks appear more likely at full automation. We close by presenting some implications for policymakers and identifying priority areas for further research.     

The contribution of road traffic to particulate matter and metals in air pollution in the vicinity of an urban road

A detailed investigation was conducted to study the sources of particulate matter in the vicinity of an urban road in Žilina. To determine the amount of particulate matter (PM₁₀, PM_2.5 and PM₁) present in the ambient air, a reference gravimetric method was used. The main objective of this contribution was to identify the sources of these particles by means of statistical methods, specifically principal component analysis (PCA), factor analysis (FA), and absolute principal component scores (APCS), as well as using the presence of 17 metals in the particulate matter (Na, Mg, Al, Ca, V, Cr, Fe, Mn, Ni, Cu, Zn, As, Mo, Sb, Cd, Ba, Pb). To identify the metals in the particulate matter samples and to determine their abundances, spectroscopic methods were used, specifically inductively coupled plasma mass spectrometry (ICP-MS). Each of these metals may come from a specific source, such as the burning of fossil fuels in fossil fuel power plants; local heating of households; the burning of liquefied fossil fuels in the combustion engines of vehicles; the burning of coal and wood; non-combustion related emissions resulting from vehicular traffic; resuspension of traffic-related dust; and industry. Diesel vehicles and non-combustion emissions from road traffic have been identified as two key sources of the particulate matter. The results reveal that non-combustion emissions, which are associated with the elements Na, Fe, Mn, Ni, Zn, Mo, Sb, Cd, and Pb, are the major contributors, followed by combustion emissions from diesel vehicles, which are associated with the elements Mg, Ca, and Ba.     

Field investigation and parametric study of greenhouse gas emissions from railway plain-line renewals

Railway transportation is becoming increasingly important in many parts of the world for mass transport of passengers and freight. This study was prompted by the industry’s need to systemically estimate greenhouse gas emissions from railway construction and maintenance activities. In this paper, the emphasis is placed on plain-line railway maintenance and renewal projects. The objective of this study was to reduce the uncertainties and assumptions of previous studies based on ballasted track maintenance and renewal projects. A field-based data collection was carried out on plain-line ballasted track renewals. The results reveal that the emissions from the materials contribute more than nine times the CO₂-e emissions than the machines used in the renewal projects. The results show that extending the lifespan of rail infrastructure assets through maintenance is beneficial in terms of reducing CO₂-e emissions. Analysis was then carried out using the field data. Then the results were compared to two ballastless track alternatives. The results show that CO₂-e emissions per metre from ballasted track were the least overall, however, the maintenance CO₂-e emissions are greater than those of ballastless tracks over the infrastructure lifespan, with ballasted track maintenance emitting more CO₂-e emissions at the 30 and 60 year intervals and the end of life when compared to the ballastless track types. The outcome of the study can provide decision makers, construction schedulers, environmental planners and project planners with reasonably accurate GHG emission estimates that can be used to plan, forecast and reduce emissions for plain-line renewal projects.     

西部公路交通安全应用技术成果推介

西部课题项目＂公路交通安全应用技术研究＂通过对道路交通设施进行系统的分析,提出并确定道路设计、建设、养护以及交通控制与管理方面的安全改善措施,为降低事故率、改善道路安全提供科学依据。本篇对该技术研究成果进行介绍,以进一步推广使用。     

GHG-emission models for assessing the eco-friendliness of road and rail freight transports

Intermodal rail/road transportation is an instrument of green logistics, which may help reducing transport related greenhouse gas (GHG) emissions. In order to assess the environmental impact of road and rail transports, researchers have formulated very detailed microscopic models, which determine vehicle emissions precisely based on a vast number of parameters. They also developed macroscopic models, which estimate emissions more roughly from few parameters that are considered most influential. One of the goals of this paper is to develop mesoscopic models that combine the preciseness of micro-models while requiring only little more information than macro-models. We propose emission models designed for transport planning purposes which are simple to calibrate by transport managers. Despite their compactness, our models are able to reflect the influence of various traffic conditions on a transport’s total emissions. Furthermore, contrasting most papers considering either the road or the rail mode, we provide models on a common basis for both modes of transportation. We validate our models using popular micro- and macroscopic models and we apply them to artificial and real world transport scenarios to identify under which circumstances intermodal transports actually effect lower emissions. We find that travel speed and country-specific energy emission factors influence the eco-friendliness of intermodal transports most severely. Hence, the particular route chosen for a transnational intermodal transport is an important but so far neglected option for eco-friendly transportation.     

Pathways for GHG emission reduction in Norwegian road transport sector: Perspective on consumption of passenger car transport and electricity mix

Electrification of the transport sector is considered as a solution to reduce greenhouse gases (GHGs) emissions and achieve sustainable mobility. Specifically in the case of electrification of passenger vehicles, various industrial and policy initiatives have been introduced. In this article, we present and assess three approaches – pro-technology, pro-simplicity and mix (of the aforementioned approaches) – to achieve target emission reductions in the Norwegian road transport sector. We also assess the influence of including ‘Guarantee of Origin’ certification for the electricity production in accounting for typical consumption electricity mix in Norway.Results show that for the same reductions in tail-pipe GHG emissions, pro-technology, pro-simplicity, and the mix scenario offer 22%, 29% and 28% reduction in the life cycle GHG emissions respectively, compared to the reference scenario in year 2020. However, the pro-simplicity scenario requires 25% reduction in vehicle-km driven compared to the pro-technology scenario, which provides the same passenger car mobility as in the reference case. When the GHG intensity of the electricity mix used to power EVs is corrected to account for actual consumption mix in Norway, a 13% reduction in the net GHG benefit of pro-technology scenario is observed.     

Induced road traffic in Spanish regions: A dynamic panel data model

Distinguishing between traffic generated exclusively from the expansion of the road network (induced demand) and that resulting from other demand factors is of crucial importance to properly designed transport policies. This paper analyzes and quantifies the induced demand for road transport for Spain’s main regions from 1998 to 2006, years that saw mobility in Spain attain its highest growth rate. The lack of research in this area involving Spain and the key role played by the sector, given its high level of energy consumption and the negative externalities associated with it (accidents, noise, traffic congestion, emissions, etc.), endow greater relevance to this type of research. Based on a Dynamic Panel Data (DPD) reduced-form model, we apply alternative approaches (fixed and random effects and GMM-based methods) for measuring the induced demand. The results obtained provide evidence for the existence of an induced demand for transport in Spain, though said results vary depending on the estimating method employed.     

Strategies to achieve deep reductions in metropolitan transportation GHG emissions: the case of Philadelphia

ABSTRACT

This paper investigates strategies that could achieve an 80% reduction in transportation emissions from current levels by 2050 in the City of Philadelphia. The baseline daily lifecycle emissions generated by road transportation in the Greater Philadelphia Region in 2012 were quantified using trip information from the 2012 Household Travel Survey (HTS). Emissions were projected to the year 2050 accounting for population growth and trends in vehicle technology for both the Greater Philadelphia Region and the City of Philadelphia. The impacts of vehicle technology and shifts in travel modes on greenhouse gas (GHG) emissions in 2050 were quantified using a scenario approach. The analysis of 12 different scenarios suggests that 80% reduction in emissions is technically feasible through a combination of active transportation, cleaner fuels for public transit vehicles, and a significant market penetration of battery-electric vehicles. The additional electricity demand associated with greater use of electric vehicles could amount to 10.8 TWh/year. The use of plug-in hybrid electric vehicles (PHEV) shows promising results due to high reductions in GHG emissions at a potentially manageable cost.     

公路养护管理发展探讨

公路的养护管理是延长公路使用寿命,保证交通运行顺畅的重要管理手段。本文主要针对当前公路使用过程中出现的主要病害,结合节能环保的时代主题,针对公路的主要病害分析公路养护过程中主要养护技术的开展,以望为提高公路养护管理水平提供一定的参考价值。     

Fuel cycle emissions and life cycle costs of alternative fuel vehicle policy options for the City of Houston municipal fleet

Municipal fleet vehicle purchase decisions provide a direct opportunity for cities to reduce emissions of greenhouse gases (GHG) and air pollutants. However, cities typically lack comprehensive data on total life cycle impacts of various conventional and alternative fueled vehicles (AFV) considered for fleet purchase. The City of Houston, Texas, has been a leader in incorporating hybrid electric (HEV), plug-in hybrid electric (PHEV), and battery electric (BEV) vehicles into its fleet, but has yet to adopt any natural gas-powered light-duty vehicles. The City is considering additional AFV purchases but lacks systematic analysis of emissions and costs. Using City of Houston data, we calculate total fuel cycle GHG and air pollutant emissions of additional conventional gasoline vehicles, HEVs, PHEVs, BEVs, and compressed natural gas (CNG) vehicles to the City's fleet. Analyses are conducted with the Greenhouse Gases, Regulated Emissions, and Energy use in Transportation (GREET) model. Levelized cost per kilometer is calculated for each vehicle option, incorporating initial purchase price minus residual value, plus fuel and maintenance costs. Results show that HEVs can achieve 36% lower GHG emissions with a levelized cost nearly equal to a conventional sedan. BEVs and PHEVs provide further emissions reductions, but at levelized costs 32% and 50% higher than HEVs, respectively. CNG sedans and trucks provide 11% emissions reductions, but at 25% and 63% higher levelized costs, respectively. While the results presented here are specific to conditions and vehicle options currently faced by one city, the methods deployed here are broadly applicable to informing fleet purchase decisions.     

Impact of horizontal geometric design of two-lane rural roads on vehicle co2 emissions

In 2014, highway vehicles accounted for 72.8% of all Greenhouse Gases emissions from transportation in Europe. In the United States (US), emissions follow a similar trend. Although many initiatives try to mitigate emissions by focusing on traffic operations, little is known about the relationship between emissions and road design. It is feasible that some designs may increase average flow speed and reduce accelerations, consequently minimizing emissions.This study aims to evaluate the impact of road horizontal alignment on CO₂ emissions produced by passenger cars using a new methodology based on naturalistic data collection. Individual continuous speed profiles were collected from actual drivers along eleven two-lane rural road sections that were divided into 29 homogeneous road segments. The CO₂ emission rate for each homogeneous road segment was estimated as the average of CO₂ emission rates of all vehicles driving, estimated by applying the VT-Micro model.The analysis concluded that CO₂ emission rates increase with the Curvature Change Rate. Smooth road segments normally allowed drivers to reach higher speeds and maintain them with fewer accelerations. Additionally, smother segments required less time to cover the same distance, so emissions per length were lower. It was also observed that low mean speeds produce high CO₂ emission rates and they increase even more on roads with high speed dispersions.Based on this data, several regression models were calibrated for different vehicle types to estimate CO₂ emissions on a specific road segment. These results could be used to incorporate sustainability principles to highway geometric design.