Route structures in air transportation—the situation in the federal republic of Germany

This paper deals with route structures in air transportation in general and describes the derivation of such structures. Based on an extensive analysis of scheduled air traffic in Germany, an overview of the situation in domestic and international air travel is given. In particular, relationships were found which permit—in connection with a number of influencing factors—to derive from the present situation route structures, which are also valid for a future year.

This approach was used for the assignment of origin‐destination‐passenger flows to air network routes in a forecast of demand and services in commercial air transportation of the Federal Republic of Germany for the year 1995.     

Flight and passenger delay assignment optimization strategies

This paper compares different optimization strategies for the minimization of flight and passenger delays at two levels: pre-tactical, with on-ground delay at origin, and tactical, with airborne delay close to the destination airport. The optimization model is based on the ground holding problem and uses various cost functions. The scenario considered takes place in a busy European airport and includes realistic values of traffic. A passenger assignment with connections at the hub is modeled. Statistical models are used for passenger and connecting passenger allocation, minimum time required for turnaround and tactical noise; whereas uncertainty is also introduced in the model for tactical noise. Performance of the various optimization processes is presented and compared to ration by schedule results.     

Apron capacity at hub airports—the impact of wave‐system structure

At hub airports, dominant airlines/alliance coordinate their flights in time with the aim of increasing the number (and quality) of connections, thus producing a wave‐system in traffic schedules. This paper addresses the impact of concentrating aircraft into waves on airport apron capacity. Existing models for apron capacity estimation are based on the number of stands, stand occupancy time, and demand structure, differing between representative groups of aircraft served at an airport. Criteria for aircraft grouping are aircraft type and/or airline and/or type of service (domestic, international, etc.). Modified deterministic analytical models proposed in this paper also take into account the wave‐system parameters, as well as runway capacity. They include the impact of these parameters on the number of flights in wave, stand occupancy time, and consequently apron capacity. Numerical examples illustrate the difference between apron capacity for an origin–destination airport and a hub airport, under the same conditions; utilization of the theoretical apron capacity at a hub airport, given the wave‐system structure; and utilization of the apron capacity at a hub airport when point‐to‐point traffic is allowed to use idle stands. Furthermore, the influence of different assignment strategies for aircraft stands in the case of hub airports is also discussed. Copyright © 2016 John Wiley & Sons, Ltd.     

A decomposition approach to determining fleet size and structure with network flow effects and demand uncertainty

This paper presents a new methodology to determine fleet size and structure for those airlines operating on hub‐and‐spoke networks. The methodology highlights the impact of stochastic traffic network flow effects on fleet planning process and is employed to construct an enhanced revenue model by incorporating the expected revenue optimization model into fleet planning process. The objective of the model is to find a feasible allocation of aircraft fleet types to route legs using minimum fleet purchasing cost, thus ensuring that the expected fleet profit is maximized subject to several critical resource constraints. By using a linear approximation to the total network revenue function, the fleet planning model with enhanced revenue modeling is decomposed into the nonlinear aspects of expected revenue optimization and the linear aspects of determining fleet size and structure by optimal allocation of aircraft fleet types to route legs. To illustrate this methodology and its economic benefits, an example consisting of 6 chosen aircraft fleet types, 12 route legs, and 57 path‐specific origin‐destination markets is presented and compared with the results found using revenue prorated fleet planning formulation. The results show that the fleet size and structure of the methodology proposed in this paper gain 211.4% improvement in fleet profit over the use of the revenue prorated fleet planning approach. In addition, comparison with the deterministic model reveals that the fleet size and structure of this proposed methodology are more adaptable to the fluctuations of passenger demands. Copyright © 2016 John Wiley & Sons, Ltd.     

An empirical study of simulation-based dynamic traffic assignment procedures

Abstract

Under Intelligent Transportation Systems (ITS), real-time operations of traffic management measures depend on long-term planning results, such as the origin–destination (OD) trip distribution; however, results from current planning procedures are unable to provide fundamental data for dynamic analysis. In order to capture dynamic traffic characteristics, transportation planning models should play an important role to integrate basic data with real-time traffic management and control. In this paper, a heuristic algorithm is proposed to establish the linkage between daily OD trips and dynamic traffic assignment (DTA) procedures; thus results from transportation planning projects, in terms of daily OD trips, can be extended to estimate time-dependent OD trips. Field data from Taiwan are collected and applied in the calibration and validation processes. Dynamic Network Assignment-Simulation Model for Advanced Road Telematics (DYNASMART-P), a simulation-based DTA model, is applied to generate time-dependent flows. The results from the validation process show high agreement between actual flows from vehicle detectors (VDs) and simulated flows from DYNAMSART-P.     

Statistical inference on transit route‐level origin–destination flows using automatic passenger counter data

We consider inferring transit route‐level origin–destination (OD) flows using large amounts of automatic passenger counter (APC) boarding and alighting data based on a statistical formulation. One critical problem is that we need to enumerate the OD flow matrices that are consistent with the APC data for each bus trip to evaluate the model likelihood function. The OD enumeration problem has not been addressed satisfactorily in the literature. Thus, we propose a novel sampler to avoid the need to enumerate OD flow matrices by generating them recursively from the first alighting stop to the last stop of the bus route of interest. A Markov chain Monte Carlo (MCMC) method that incorporates the proposed sampler is developed to simulate the posterior distributions of the OD flows. Numerical investigations on an operational bus route under a realistic OD structure demonstrate the superiority of the proposed MCMC method over an existing MCMC method and a state‐of‐the‐practice method. Copyright © 2015 John Wiley & Sons, Ltd.     

Comparing the impact of future airline network change on emissions in India and the United States

In this paper we use simulation to analyze how flight routing network structure may change in different world regions, and how this might impact future traffic growth and emissions. We compare models of the domestic Indian and US air transportation systems, representing developing and mature air transportation systems respectively. We explicitly model passenger and airline decision-making, capturing passenger demand effects and airline operational responses, including airline network change. The models are applied to simulate air transportation system growth for networks of 49 airports in each country from 2005 to 2050. In India, the percentage of connecting passengers simulated decreases significantly (from over 40% in 2005 to under 10% in 2050), indicating that a shift in network structure towards increased point-to-point routing can be expected. In contrast, very little network change is simulated for the US airport set modeled. The simulated impact of network change on system CO₂ emissions is very small, although in the case of India it could enable a large increase in demand, and therefore a significant reduction in emissions per passenger (by nearly 25%). NO_x emissions at major hub airports are also estimated, and could initially reduce relative to a case in which network change is not simulated (by nearly 25% in the case of Mumbai in 2025). This effect, however, is significantly reduced by 2050 because of frequency competition effects. We conclude that network effects are important when estimating CO₂ emissions per passenger and local air quality effects at hub airports in developing air transportation systems.     

Achieving transport modal split targets at intermodal freight hubs using a model predictive approach

The increase of international freight commerce is creating pressure on the existing transport network. Cooperation between the different transport parties (e.g., terminal managers, forwarders and transport providers) is required to increase the network throughput using the same infrastructure. The intermodal hubs are locations where cargo is stored and can switch transport modality while approaching the final destination. Decisions regarding cargo assignment are based on cargo properties. Cargo properties can be fixed (e.g., destination, volume, weight) or time varying (remaining time until due time or goods expiration date). The intermodal hub manager, with access to certain cargo information, can promote cooperation with and among different transport providers that pick up and deliver cargo at the hub. In this paper, cargo evolution at intermodal hubs is modeled based on a mass balance, taking into account hub cargo inflows and outflows, plus an update of the remaining time until cargo due time. Using this model, written in a state-space representation, we propose a model predictive approach to address the Modal Split Aware – Cargo Assignment Problem (MSA–CAP). The MSA–CAP concerns the cargo assignment to the available transport capacity such that the final destination can be reached on time while taking into consideration the transport modality used. The model predictive approach can anticipate cargo peaks at the hub and assigns cargo in advance, following a push of cargo towards the final destination approach. Through the addition of a modal split constraint it is possible to guide the daily cargo assignment to achieve a transport modal split target over a defined period of time. Numerical experiments illustrate the validity of these statements.     

Effects of high-speed rail and airline cooperation under hub airport capacity constraint

This paper analyzes the effects of cooperation between a hub-and-spoke airline and a high-speed rail (HSR) operator when the hub airport may be capacity-constrained. We find that such cooperation reduces traffic in markets where prior modal competition occurs, but may increase traffic in other markets of the network. The cooperation improves welfare, independent of whether or not the hub capacity is constrained, as long as the modal substitutability in the overlapping markets is low. However, if the modal substitutability is high, then hub capacity plays an important role in assessing the welfare impact: If the hub airports are significantly capacity-constrained, the cooperation improves welfare; otherwise, it is likely welfare reducing. Through simulations we further study the welfare effects of modal asymmetries in the demands and costs, heterogeneous passenger types, and economies of traffic density. Our analysis shows that the economies of traffic density alone cannot justify airline–HSR cooperation.     

Preliminary analysis on dynamic route choice behavior: Using probe‐vehicle data

Dynamic traffic assignment models have been attracting increasing attention with the progress of traffic management policies based on information technology. These dynamic estimation tools, however, just apply static route choice models either at only origin node or at every arrival node. This paper aims at providing some knowledge on drivers' dynamic route choice behavior using probe‐vehicle data. The results of analyses show that route choice behavior relates to the distance from driver's position to the destination and that dynamic route choice behavior is modeled better by considering decision process during the trip.     

Air itinerary shares estimation using multinomial logit models

ABSTRACT

The main goal of this study is the development of an aggregate air itinerary market share model. In order to achieve this, multinomial logit models are applied to distribute the city-pair passenger demand across the available itineraries. The models are developed at an aggregate level using open-source booking data for a large group of city-pairs within the US air transport system. Although there is a growing trend in the use of discrete choice models in the aviation industry, existing air itinerary share models are mostly focused on supporting carrier decision-making. Consequently, those studies define itineraries at a more disaggregate level using variables describing airlines and time preferences. In this study, we define itineraries at a more aggregate level, i.e. as a combination of flight segments between an origin and destination, without further insight into service preferences. Although results show some potential for this approach, there are challenges associated with prediction performance and computational intensity.     

Effect of open skies in the Middle East region

This research aims to estimate potential inter-regional passenger flows for air transport in the Middle East under open skies polices, once deregulation agreements are reached between neighboring countries. To arrive at reasonable demand estimates, Western and Eastern European demand data was analyzed as a first step, since it is assumed that current Middle Eastern demand is distorted as a direct result of regional political instability. The major factors affecting demand, based on the European dataset, included population size, gross domestic product (GDP) per capita, absolute difference in GDP per capita between two countries, great circle distance and membership of the European Union and World Trade Organization. Subsequently, a 21 country database was estimated for passenger flow in the Middle East region on an average peak season day. The demand estimations became input for a hub location model (p-hub median formulation) in order to achieve the second major aim of this research, objective identification of potential regional gateways. The results proved robust to both single and multiple allocation model assumptions, with Cairo and Tehran consistently achieving hub status, along with Istanbul and Riyadh, as the number of potential hubs increased. Finally, this research shows that under conditions of peace, given existing socio-economic indicators, inter-regional passenger demand flow could increase by upwards of 51% and regulatory authorities ought to consider the necessary infrastructure and demand management policies to enable the conservative regional demand growth estimated.     

Analysis of factors affecting the choice of route of pedestrians

Pedestrians as compared to vehicular traffic enjoy a high degree freedom of movement even in heavily congested areas. Consequently, there are more alternative links available to pedestrians between a given origin‐destination (O‐D) pair. This paper describes a study done by the University of Calgary to evaluate the factors affecting the choice of route on intra‐CBD trips or trips within the Central Business District (CBD).

An origin destination survey conducted in downtown Calgary, Alberta enabled the identification of the most significant factors influencing the choice. These factors were analyzed in relation to the physical characteristics of the location, personal characteristics of the trip maker and the type of the trip.

It appears that most people chose the shortest link and factors such as the level of congestion, safety or visual attractions were only secondary. This suggests that the length should be made a major consideration when planning and designing pedestrian links.     

The environmental cost implication of hub–hub versus hub by-pass flight networks

Increasing congestion at major hubs and the advantage to passengers of non-stop flights and faster journey times has intensified the debate on patterns of air service. At the same time the economics of highly focused networks has been challenged by the availability of very economic smaller capacity long-haul aircraft. The purpose of this research is to value the environmental costs of these two patterns of service: hub-to-hub and hub by-pass. Five long-haul markets were evaluated both on a hub to hub and hub by-pass basis. These involved both transatlantic and Europe/Asia flights. It was found that the noise and emissions social cost impact of the hub by-pass networks was significantly lower than the hub to hub in all cases. Differences in environmental costs per passenger depend on the concentration of population around the airports and the degree to which the hub routing involves extra mileage.     

Freight Data Assembling and Modeling: Methodologies and Practice

Abstract

In comparison to personal travel, freight movements within large metropolitan areas are much less studied. Most conventional transportation models and planning analysis that disregarded freight flows have been criticized on the plausibility of their results and conclusions. To alleviate these problems, this study proposes a non-survey based approach to assemble and process freight data in a systematic way. A freight origin–destination (OD) matrix of freight flows can be developed using secondary data sources. The estimated freight flows can be loaded together with conventional passenger flows onto the regional highway network of a large metropolitan area. As a case study, this non-survey based approach was applied to build a freight OD and study the traffic flows in Los Angeles. It concluded that this approach can be used to analyze urban freight movement in a low-cost way in which planning agencies can overcome the common omission of freight flow information in their transportation plans.     

A continuous approximation model for time definite many-to-many transportation

Time definite freight transportation carriers provide very reliable scheduled services between origin and destination terminals. They seek to reduce transportation costs through consolidation of shipments at hubs, but are restricted by the high levels of service to provide less circuitous routings. This paper develops a continuous approximation model for time definite transportation from many origins to many destinations. We consider a transportation carrier serving a fixed geographic region in which demand is modeled as a continuous distribution and time definite service levels are imposed by limiting the maximum travel distance via the hub network. Analytical expressions are developed for the optimal number of hubs, hub locations, and transportation costs. Computational results for an analogous discrete demand model are presented to illustrate the behavior observed with the continuous approximation models.     

基于DEA的城市客运换乘枢纽服务水平评价研究

为了对城市客运换乘枢纽服务水平进行有效的评价,找出其在运行过程中存在的问题并予以解决,建立了城市客运枢纽换乘服务水平评价体系,并利用数据包络分析(DEA)方法进行了有效分析;选取西安市地铁2号线北大街、小寨、钟楼等三个典型枢纽进行了实例分析。结果表明:DEA方法可以有效地应用于城市客运枢纽换乘服务水平评价中,并且为提升换乘枢纽服务水平提供了参考依据。     

Fuel burn and environmental implications of airline hub networks

Hubs act as switching points for interactions and so are places through which flows are concentrated. This research uses the interactions between a system of cities as an experimental context for understanding selected environmental costs and benefits of concentrated flow. Whether hub based networks create additional environmental costs has been debated in the literature. In this paper, fuel burn is used as an indicator of environmental cost. The essential ideas are: (1) to examine fuel costs associated with larger aircraft; (2) to determine implications of higher loads on dense routes; and (3) to model the resulting implications for hub and gateway location. Variants of these questions apply to passenger and freight flows, and the paper will initially concentrate on passenger models.The paper shows that by modeling fuel burn and introducing a fixed charge (like a set up cost), a multiple allocation hub and spoke model can be adjusted to direct more or less flow onto the inter-facility connector. In other words, usage of multiple connections and direct links can be controlled and modeled as a function of the fixed charge. The resulting networks are characterized by quite different levels of passenger miles, aggregate fuel burn and fixed charges. The preferred network in terms of minimal fuel burn is found by subtracting the fixed set up charge, thereby focusing attention on the modeled fuel burn. The lowest cost set up is a network with a high degree of connectivity, and a pure single assignment hub network has the highest fuel cost (as a result of larger passenger miles needed by connecting paths). The data also allow a tabulation of total passenger miles, which, not surprisingly, track very closely with the fuel burn. In an interesting application of the ideas, it is shown that a fuel efficient network may require a large number of smaller regional jets, and in the interests of avoiding noise and congestion from so many extra airport operations, the carriers may choose to substitute a smaller number of larger planes, thereby slightly increasing fuel needs. This paper also provides a key ingredient for models of an international network where it is impossible to serve many long distance market pairs without consolidation.     

An aggregate demand model for air passenger traffic in the hub-and-spoke network

In this paper, we build an aggregate demand model for air passenger traffic in a hub-and-spoke network. This model considers the roles of airline service variables such as service frequency, aircraft size, ticket price, flight distance, and number of spokes in the network. It also takes into account the influence of local passengers and social-economic and demographic conditions in the spoke and hub metropolitan areas. The hub airport capacity, which has a significant impact on service quality in the hub airport and in the whole hub-and-spoke network, is also taken into consideration.Our demand model reveals that airlines can attract more connecting passengers in a hub-and-spoke network by increasing service frequency than by increasing aircraft size in the same percentage. Our research confirms the importance of local service to connecting passengers, and finds that, interestingly, airlines’ services in the first flight leg are more important to attract passengers than those in the second flight segment. Based on data in this study, we also find that a 1% reduction of ticket price will bring about 0.9% more connecting passengers, and a 1% increase of airport acceptance rate can bring about 0.35% more connecting passengers in the network, with all else equal. These findings are helpful for airlines to understand the effects of changing their services, and also useful for us to quantify the benefits of hub airport expansion projects.At the end of this paper, we give an example as an application to demonstrate how the developed demand model could be used to valuate passengers’ direct benefit from airport capacity expansion.     

The impact of Gulf carrier competition on U.S. airlines

Gulf carriers, such as Emirates Airline, Etihad Airways, and Qatar Airways, have expanded aggressively and are creating an increasingly dense global network. These carriers’ future growth prospects, however, hinge on their ability to gain access to markets in Europe and America, for example. Existing bilateral agreements stifle the Gulf carriers’ ambitious expansion plans in some instances, and incumbent carriers lobby to restrict further market access. To contribute to this debate, the objective of this research is to empirically examine the effects of Gulf carrier competition on U.S. carriers’ passenger volumes and fares in international route markets. Based on data obtained from the U.S. Department of Transportation, the empirical results suggest that greater competition by Gulf carriers in U.S. international markets is associated with (1) significant growth in U.S.–Middle East traffic volumes and (2) small but statistically significant traffic losses and fare reductions for U.S. carriers in route markets connecting the U.S. with Africa, Asia, Australia and Europe.