A structured flexible transit system for low demand areas

Public transit structure is traditionally designed to contain fixed bus routes and predetermined bus stations. This paper presents an alternative flexible-route transit system, in which each bus is allowed to travel across a predetermined area to serve passengers, while these bus service areas collectively form a hybrid “grand” structure that resembles hub-and-spoke and grid networks. We analyze the agency and user cost components of this proposed system in idealized square cities and seek the optimum network layout, service area of each bus, and bus headway, to minimize the total system cost. We compare the performance of the proposed transit system with those of comparable systems (e.g., fixed-route transit network and taxi service), and show how each system is advantageous under certain passenger demand levels. It is found out that under low-to-moderate demand levels, the proposed flexible-route system tends to have the lowest system cost.     

Structural equation modeling of user satisfaction of bus transit service quality based on stated preferences and latent variables

Few studies have been conducted on the service quality (SQ) of bus transit in developing countries. This paper presents a structural equation modeling (SEM) approach to identifying the relationships among major attributes that affect the SQ of bus transit in the city of Dhaka in Bangladesh. Specifically, 22 bus transit SQ attributes, drawn from 655 questionnaires, are used to develop different SEM models for the city. Along with stated preferences, the effect of three latent variables on SQ is analyzed. Among the developed models, the best model is selected by using different statistical approaches. With the best model, selected attributes are rated according to their relative importance on SQ. Acknowledging limited resources of a developing nation, this study gives a clear way ahead to planners, operating companies and transport managers to design appropriate transport policies which will ensure more effective services to current bus users as well as attracting new passengers.     

Drivers of transit service loyalty considering heterogeneity between user segments

Users’ loyalty to public transit service is fundamental to promote its popularity in the transportation market. A four-step analytical framework is advanced to investigate the importance of service attributes that heterogeneous transit user segments place on their public transit service loyalty, measured in terms of overall satisfaction and re-use intention. Critical service attributes perceived by transit users that are relevant for loyalty enhancement are explicitly determined, which vary between user segments. It is suggested that the design of strategies aimed to promote the use of public transit by increasing user loyalty towards transit service be targeted at specific attributes that contribute most to loyalty and specific user segments whose original loyalty level is significantly different to others.     

Understanding the Relationship Between Physical and Virtual Representations of Transit Agencies

Abstract

This study examines whether physical attributes of transit agencies, such as agency size, make a difference in how transit websites are designed, and how transit information is distributed. The objective of this study is to see if there is a relationship between physical and virtual representations of transit agencies. A rating instrument is developed for evaluating the quality of transit websites. Our findings suggest that transit agency size plays a key role in determining website quality: When the size of transit system is large, the information about the agency is too complex to be effectively presented on web pages. Thus, the quality of the large agencies’ websites is lower than medium-sized agencies. Instead, we find that large agencies attempt to design more user-friendly sites, and provide advanced information searching tools to compensate for low information quality. Policy implications for transit agencies are discussed.     

Effects of contracting on cost efficiency in US fixed-route bus transit service

Contracted service comprises a significant proportion of total operating expenses in the provision of fixed-route bus transit service in the US. Despite its importance, the literature on the economic effects of transit service contracting has been limited to only a few studies since the mid-1990s, and is inconclusive due to problems with the nature and methodology of the past studies.This paper examines how the cost efficiency of providing fixed-route bus transit service varies by the degree of contracting. I make several improvements to previous studies and conduct a regression analysis that: (1) addresses the endogeneity problem between the contracting decision and cost efficiency, (2) differentiates between agencies that contract out only a portion of service from those that contract out all service, (3) takes into account the moderating effects of several factors on the effect of contracting on cost efficiency, and (4) uses a relatively larger set of cross-sectional time-series data constructed from the National Transit Database from 1992 to 2000.The analysis results show that the combined effects of contracting lower operating costs by $4.09 and $2.89 per vehicle hour for partial and full-contracting agencies, respectively, in the average case. These average cost savings translate into 7.8% and 5.5%, using the average operating cost per vehicle hour of $53.06. However, this improvement is not universal, because the effects of contracting on cost efficiency vary by factors such as peak-to-base ratio, agency size, the wage gap between bus operators in the public and private sectors, and agency type.     

Examining the influence of multidestination service orientation on transit service productivity: a multivariate analysis

Between 1990 and 2000, U.S. transit agencies added service and increased ridership, but the ridership increase failed to keep pace with the service increase. The result was a decline in service effectiveness (or productivity). This marks the continuation of a long-running and often-studied trend. The scholarly literature attributes this phenomenon, at least in part, to transit agency decisions to decentralize their service rather than focus on serving the traditional CBD market. Many scholars argue that a decentralized service orientation is both ineffective and inefficient because it attracts few riders and requires large per-rider subsidies. This research tests whether a non-traditional, decentralized service orientation, called multidestination service, results in reduced service productivity. Contrary to what the literature suggests, we find that MSAs whose transit agencies pursued a multidestination service orientation did not experience lower productivity. These results indicate that policies that have encouraged the growth of decentralized transit services have not necessarily been detrimental to the industry.

Reducing the cost of peak hour transit service through contracting out service

Transit service contracting has responded to fiscal and financial woes of public transit agencies as the most uniquely attractive cost‐saving strategy at present. Most transit service contracting, however, has been in the traditional provision of entire fixed route bus service or commuter express bus service, and exclusive demand responsive service for the general public or for special disadvantaged population groups such as the elderly and/or the handicapped. This paper presents a new module in transit service contracting whereby the public and private operators jointly provide the peak service on the same route and at the same time. While the public agency provides the base demand of the service, the private provider provides the excess demand, both following the same schedules and similar service arrangements. In this paper, proposed service arrangements, costing and contracting procedures are discussed. It is also reported that substantial cost savings ranging from 32 to 57% with an average savings of 48% can be achieved if the excess peak hour bus transit service on highly peaked routes in public transit agencies is contracted to competing private operator(s).     

Planning hierarchical urban transit systems for reductions in greenhouse gas emissions

Public transit systems with high occupancy can reduce greenhouse gas (GHG) emissions relative to low-occupancy transportation modes, but current transit systems have not been designed to reduce environmental impacts. This motivates the study of the benefits of design and operational approaches for reducing the environmental impacts of transit systems. For example, transit agencies may replace level-of-service (LOS) by vehicle miles traveled (VMT) as a criterion in evaluating design and operational changes. In previous work, we explored the unintended consequences of lowering transit LOS on emissions in a single-technology transit system. Herein, we extend the analysis to account for a more realistic case: a transit system with a hierarchical structure (trunk and feeder lines) providing service to a city where demand is elastic. By considering the interactions between the trunk and the feeder systems, we provide a quantitative basis for designing and operating integrated urban transit systems that can reduce GHG emissions and societal costs. We find that highly elastic transit demand may cancel emission reduction potentials resulting from lowering LOS, due to demand shifts to lower occupancy vehicles. However, for mass transit modes, these potentials are still significant. Transit networks with buses, bus rapid transit or light rail as trunk modes should be designed and operated near the cost-optimal point when the demand is highly elastic, while this is not required for metro. We find that the potential for unintended consequences increases with the size of the city. Our results are robust to uncertainties in the costs and emissions parameters.     

An analysis of public bus transit performance in Indian cities

Maintaining and enhancing public transit service in Indian cities is important, to meet rapidly growing mass mobility needs, and curb personal motor vehicle activity and its impacts at low cost. Indian cities rely predominantly on buses for public transport, and are likely to continue to do so for years. However, the public bus transit service is inadequate, and unaffordable for the urban poor. The paper explores the factors that contribute to and affect efforts to improve this situation, based on an analysis of the financial and operational performance of the public bus transit service in the four metropolitan centres and four secondary cities during the 1990s. Overall, there were persistent losses, owing to increasing input costs and declining productivity. The losses occurred despite rapidly increasing fares, and ridership declined. The situation, and the ability to address it, is worse in the secondary cities than the metropolitan centres. We suggest a disaggregated approach based on the needs and motivations of different groups in relation to public transit, along with improved operating conditions and policies to internalize costs of personal motor vehicle use, to address the challenge of providing financially viable and affordable public bus transit service.     

The design of interurban bus networks in city centers

This paper proposes a bilevel formulation for solving the Bus Network Design Problem (BNDP) of interurban services entering a major city. It is focused in interurban services because it is a growing problem in most of major cities, yet new in the literature. The layout of interurban bus routes and the locations of transfer stations in the main city are the key factors to provide a competitive public transportation service to commuters in a metropolitan area. The number of commuters in huge urban concentrations is growing due to the difficulties of living near the city center. The objective function of the first level is defined with the aim of reducing user and agency costs. In the second level the performance of users is addressed. Furthermore, a local search method based on the Tabu Search algorithm was carried out to guide the exploration in the solution domain. The results obtained in a set of test problems have demonstrated that the restart parameters of the algorithm play a significant role in the efficiency of the algorithm. Finally, implementation in the large network of Barcelona (Spain) reduces the total cost by 5% with regard to the present situation.     

An investigation on the performances of mode shift models in transit ridership forecasting

This paper aims at investigating the over-prediction of public transit ridership by traditional mode choice models estimated using revealed preference data. Five different types of models are estimated and analysed, namely a traditional Revealed Preference (RP) data-based mode choice model, a hybrid mode choice model with a latent variable, a Stated Preference (SP) data-based mode switching model, a joint RP/SP mode switching model, and a hybrid mode switching model with a latent variable. A comparison of the RP data-based mode choice model with the mode choice models including a latent variable showed that the inclusion of behavioural factors (especially habit formation) significantly improved the models. The SP data-based mode switching models elucidated the reasons why traditional models tend to over-predict transit ridership by revealing the role played by different transit level-of-service attributes and their relative importance to mode switching decisions. The results showed that traditional attributes (e.g. travel cost and time) are of lower importance to mode switching behaviour than behavioural factors (e.g. habit formation towards car driving) and other transit service design attributes (e.g. crowding level, number of transfers, and schedule delays). The findings of this study provide general guidelines for developing a variety of transit ridership forecasting models depending on the availability of data and the experience of the planner.     

Design and development of interactive trip planning for web-based transit information systems

This article presents a Web-based transit information system design that uses Internet Geographic Information Systems (GIS) technologies to integrate Web serving, GIS processing, network analysis and database management. A path finding algorithm for transit network is proposed to handle the special characteristics of transit networks, e.g., time-dependent services, common bus lines on the same street, and non-symmetric routing with respect to an origin/destination pair. The algorithm takes into account the overall level of services and service schedule on a route to determine the shortest path and transfer points. A framework is created to categorize the development of transit information systems on the basis of content and functionality, from simple static schedule display to more sophisticated real time transit information systems. A unique feature of the reported Web-based transit information system is the Internet-GIS based system with an interactive map interface. This enables the user to interact with information on transit routes, schedules, and trip itinerary planning. Some map rendering, querying, and network analysis functions are also provided.     

Optimal transit service atop ring-radial and grid street networks: A continuum approximation design method and comparisons

Two continuum approximation (CA) optimization models are formulated to design city-wide transit systems at minimum cost. Transit routes are assumed to lie atop a city’s street network. Model 1 assumes that the city streets are laid out in ring-radial fashion. Model 2 assumes that the city streets form a grid. Both models can furnish hybrid designs, which exhibit intersecting routes in a city’s central (downtown) district and only radial branching routes in the periphery. Model 1 allows the service frequency and the route spacing at a location to vary arbitrarily with the location’s distance from the center. Model 2 also allows such variation but in the periphery only.The paper shows how to solve these CA optimization problems numerically, and how the numerical results can be used to design actual systems. A wide range of scenarios is analyzed in this way. It is found among other things that in all cases and for both models: (i) the optimal headways and spacings in the periphery increase with the distance from the center; and (ii) at the boundary between the central district and the periphery both, the optimal service frequency and line spacing for radial lines decrease abruptly in the outbound direction. On the other hand Model 1 is distinguished from Model 2 in that the former produces in all cases: (i) a much smaller central district, and (ii) a high frequency circular line on the outer edge of that central district.Parametric tests with all the scenarios further show that Model 1 is consistently more favorable to transit than Model 2. Cost differences between the two designs are typically between 9% and 13%, but can top 21.5%. This is attributed to the manner in which ring-radial networks naturally concentrate passenger’s shortest paths, and to the economies of demand concentration that transit exhibits. Thus, it appears that ring-radial street networks are better for transit than grids.To illustrate the robustness of the CA design procedure to irregularities in real street networks, the results for all the test problems were then used to design and evaluate transit systems on networks of the “wrong” type – grid networks were outfilled with transit systems designed with Model 1 and ring-radial networks designed with Model 2. Cost increased on average by only 2.7%. The magnitude of these deviations suggests that the proposed CA procedures can be used to design transit systems over real street networks when they are not too different from the ideal and that the resulting costs should usually be very close to those predicted.     

Time of day intervals partition for bus schedule using GPS data

Time of day partition of bus operating hours is a prerequisite of bus schedule design. Reasonable partition plan is essential to improve the punctuality and level of service. In most mega cities, bus vehicles have been equipped with global positioning system (GPS) devices, which is convenient for transit agency to monitor bus operations. In this paper, a new algorithm is developed based on GPS data to partition bus operating hours into time of day intervals. Firstly, the impacts of passenger demand and network traffic state on bus operational performance are analyzed. Then bus dwell time at stops and inter-stop travel time, which can be attained based on GPS data, are selected as partition indexes. For buses clustered in the same time-of-day interval, threshold values of differences in dwell time at stops and inter-stop travel time are determined. The buses in the same time-of-day interval should have adjacent dispatching numbers, which is set as a constraint. Consequently, a partition algorithm with three steps is developed. Finally, a bus route in Suzhou China is taken as an example to validate the algorithm. Three partition schemes are given by setting different threshold values for the two partition indexes. The present scheme in practice is compared with the three proposed schemes. To balance the number of ToD intervals and partition precision, a Benefit Evaluation Index is proposed, for a better time-of-day interval plan.     

A simulation of transit bus emissions along an urban corridor: Evaluating changes under various service improvement strategies

This study investigates the impacts of transit improvement strategies on bus emissions along a busy corridor in Montreal, Canada. The local transit provider, Société de Transport de Montréal, has implemented a number of strategies which include the use of smart cards, limited-stop (express bus) service, and reserved bus lanes along this corridor. Using data collected on-board for instantaneous speeds and stop-level ridership, we estimated bus emissions of greenhouse gases and other pollutants at three levels: road segment, bus-stop, and per passenger. A regression of segment-level emissions against a number of explanatory variables reveals that reserved bus lanes and express bus service reduce emissions significantly. On the other hand, smart card use reduces idling emissions compared to other fare payment methods. Our findings are of most relevance for transit planners who are seeking to implement different strategies to reduce emissions and improve transit performance.     

Extraboard team sizing: An analysis of short unscheduled absences among regular transit drivers

Several factors contribute to short-duration unscheduled absences of bus transit drivers. This article aims to understand these factors at the aggregate level and to anticipate future total absence that will need to be filled for a large-size transit operator. The aggregate level is defined as the total number of regular driver absences per garage, day of week and time period that need to be covered by the extraboards. This study analyzes absenteeism data obtained from OC Transpo, the transit provider of the city of Ottawa, Canada. A multilevel regression model is generated to investigate regular drivers’ absences. The short-unscheduled absence is estimated in relation to temporal factors, drivers’ personal characteristics, aspects of assigned work, and service delivery characteristics. Furthermore, using the model’s coefficients, sensitivity analyses are conducted to demonstrate the advantages of this technique over traditional ones adopted by various transit agencies. This study provides transit planners and policy makers with a practical methodology that can be used to support extraboard planning practice and help reduce the incidence of missed trips due to absences while having the appropriate size of extraboard drivers.     

Understanding the impacts of a combination of service improvement strategies on bus running time and passenger’s perception

Transit agencies implement many strategies in order to provide an attractive transportation service. This article aims to evaluate the impacts of implementing a combination of strategies, designed to improve the bus transit service, on running time and passenger satisfaction. These strategies include using smart card fare collection, introducing limited-stop bus service, implementing reserved bus lanes, using articulated buses, and implementing transit signal priority (TSP). This study uses stop-level data collected from the Société de transport de Montréal (STM)’s automatic vehicle location (AVL) and automatic passenger count (APC) systems, in Montréal, Canada. The combination of these strategies has lead to a 10.5% decline in running time along the limited stop service compared to the regular service. The regular route running time has increased by 1% on average compared to the initial time period. The study also shows that riders are generally satisfied with the service improvements. They tend to overestimate the savings associated with the implementation of this combination of strategies by 3.5-6.0 min and by 2.5-4.1 min for both the regular route and the limited stop service, respectively. This study helps transit planners and policy makers to better understand the effects of implementing a combination of strategies to improve running time and passenger’s perception of these changes in service.     

“Comparing guideway transit implementation plans,including the impact on road traffic”

A methodology for comparing phased implementation plans for a new fixed guideway transit system in an urban area is presented. Four assumptions are made: (1) the guideway system replaces existing or planned bus service, (2) superior service on the new system results in increased ridership when compared to buses; (3) presence of the guideway facility redirects outward urban growth resulting in additional ridership, and (4) conversely, the absence of any action on the new guideway facility reinforces a diffuse urban growth pattern that creates an irreversible loss of transit ridership. The economic comparision of alternative plans includes total as well as “relative” inflation of principal cost components. A key feature of the proposed methodology is including in the comparisons the costs of private automobile mileage that could have been replaced by transit. These costs are expressed as “fuel” and “all other” automobile costs; favorable transit system implementation schedules can then be identified as a function of parametrically assumed values for these two unit costs. A hypothetical example demonstrates the proposed method.     

Unlimited Access

Universities and public transit agencies have together invented an arrangement – called Unlimited Access – that provides fare-free transit service for over 825,000 people. The university typically pays the transit agency an annual lump sum based on expected student ridership, and students simply show their university identification to board the bus. This paper reports the results of a survey of Unlimited Access programs at 35 universities. University officials report that Unlimited Access reduces parking demand, increases students' access to the campus, helps to recruit and retain students, and reduces the cost of attending college. Transit agencies report that Unlimited Access increases ridership, fills empty seats, improves transit service, and reduces the operating cost per rider. Increases in student transit ridership ranged from 71 percent to 200 percent during the first year of Unlimited Access, and growth in subsequent years ranged from 2 percent to 10 percent per year. The universities' average cost for Unlimited Access is $30 per student per year.     

Bus control strategies in corridors with signalized intersections

This paper proposes a new dynamic bus control strategy aimed at reducing the negative effects of time-headway variations on route performance, based on real-time bus tracking data at stops. In routes with high demand, any delay of a single vehicle ends up causing an unstable motion of buses and producing the bus bunching phenomena. This strategy controls the cruising speed of buses and considers the extension of the green phase of traffic lights at intersections, when a bus is significantly delayed. The performance of this strategy will be compared to the current static operation technique based on the provision of slack times at holding points. An operational model is presented in order to estimate the effects of each controlling strategy, taking into account the vehicle capacity constraint. Control strategies are assessed in terms of passenger total travel time, operating cost as well as on the coefficient of headway variation. The effects of controlling strategies are tested in an idealized bus route under different operational settings and in the bus route of highest demand in Barcelona by simulation. The results show that the proposed dynamic controlling strategy reduces total system cost (user and agency) by 15–40% as well as the coefficient of headway variation 53–78% regarding the uncontrolled case, providing a bus performance similar to the expected when time disturbance is not presented.