共查询到20条相似文献,搜索用时 125 毫秒
1.
2.
3.
管道在使用过程中会出现各种缺陷,主要以腐蚀造成的体积型缺陷为主。采用有限元弹塑性分析方法,基于Von—Mise屈服准则,对含体积型缺陷的压力管道进行非线性分析,研究腐蚀缺陷的长度、宽度和深度对压力管道极限载荷的影响。与含腐蚀缺陷管道的水压试验结果及ASME B31G计算的结果进行对比,证明有限元方法在分析腐蚀缺陷管道的可行性。 相似文献
4.
含轴向内表面裂纹管道极限载荷有限元计算 总被引:1,自引:1,他引:0
获得结构的极限承载能力,是结构极限分析的基本任务。利用三维弹塑性有限元技术,通过新的极限载荷确定方法一停机点法,对内压作用下含轴向内表面裂纹管道的极限载荷进行了系统的计算与分析。结果表明:无量纲极限内压(pB/pP)主要和裂纹深度与管道厚度比(A/T)、管道厚度与直径比(T/DO)有关,裂纹长度与管道直径比(L/DO)对其影响可以忽略。建立了含轴向内表面裂纹管道无量纲塑性极限内压数据库,可供缺陷管道安全评定时参考。 相似文献
5.
6.
7.
文中以实际工程中Φ406.4×7.9 mm无缝钢制弯管发生屈曲为例,采用有限元方法对该弯管的屈曲失稳形式进行研究,分析不同载荷下弯管的变形行为,研究得到导致弯管发生屈曲变形的主要机理:案例弯管屈曲变形是外部载荷挤压地下软基而引起管道局部偏移,偏移过程中弯管局部变形集中,最终弯管屈曲发生. 相似文献
8.
含缺陷管道安全评定技术研究是油气管道施工与生产管理中的一个重要内容。系统分析了油气管道主要力学条件并综合考虑管道表面体积型缺陷等影响因素,利用ANSYS有限元分析软件的二次开发功能,运用VS2005、Access、ANSYS及其APDL语言,开发了含缺陷管道安全评定系统。该系统实现了数据库管理,含任意形貌的外缺陷、内缺陷和凹痕缺陷管道的参数化建模,非线性有限元分析以及安全评定,能够对多条管线全部缺陷的单一分析、组合分析进行全自动批量处理和控制,能够用于在役管线安全评定分析,为含缺陷管线的分析研究提供了有力工具。 相似文献
9.
基于管道极限状态可靠性评估方法,确认管道所处的极限状态,并对其在该极限状态下的各指标进行评估计算。同时,针对管道不同腐蚀状况,利用有限元分析方法,确定给定腐蚀缺陷尺寸下管道的强度,从而进一步分析管道腐蚀缺陷,有针对性地提出管道保护措施,有效保障管道的安全运行。 相似文献
10.
11.
12.
13.
14.
15.
The environmental effects of ground-borne vibrations generated due to localised railway defects is a growing concern in urban areas. Frequency domain modelling approaches are well suited for predicting vibration levels on standard railway lines due to track periodicity. However, when considering individual, non-periodic, localised defects (e.g. a rail joint), frequency domain modelling becomes challenging. Therefore in this study, a previously validated, time domain, three-dimensional ground vibration prediction model is modified to analyse such defects. A range of different local (discontinuous) rail and wheel irregularity are mathematically modelled, including: rail joints, switches, crossings and wheel flats. Each is investigated using a sensitivity analysis, where defect size and vehicle speed is varied. To quantify the effect on railroad ground-borne vibration levels, a variety of exposure–response relationships are analysed, including: peak particle velocity, maximum weighted time-averaged velocity and weighted decibel velocity. It is shown that local irregularities cause a significant increase in vibration in comparison to a smooth track, and that the vibrations can propagate to greater distances from the line. Furthermore, the results show that step-down joints generate the highest levels of vibration, whereas wheel flats generate much lower levels. It is also found that defect size influences vibration levels, and larger defects cause greater vibration. Lastly, it is shown that for different defect types, train speed effects are complex, and may cause either an increase or decrease in vibration levels. 相似文献
16.
17.
18.
19.