Modifying pedestrian behaviour

The paper reports on research using a new type of pedestrian waiting countdown timer to influence pedestrian behaviour at signalised pedestrian crossings in Dublin. The aim was to evaluate the impact of the timers on pedestrian crossing behaviour and in particular to see if it had any impact on the number of illegal crossings (during red man––do not walk signal). The timers inform the pedestrian how many seconds they have to wait until the green man appears. Two surveys were used to evaluate the impact: an attitude survey to evaluate the perception of the users and a video survey to estimate quantitatively the impacts on pedestrian behaviour but also to evaluate the awareness levels of the pedestrians towards the countdown timers. Some of the results include observance of more compliant behaviour by females and that pedestrians tend to overestimate their waiting time. Before the timers were installed 65% of pedestrians started to cross during the green man and amber phases but this rose to 76% after the timers were installed.     

Methodology for the qualitative evaluation of pedestrian crossings at road junctions with traffic lights

The aim of this work is to test the application of a method for making a qualitative evaluation of pedestrian crossings, based on the methodology of Khisty (Transportation Research Record 1438:45–50, 1994). The study identifies the Performance Measures (Comfort, Safety, System Continuity), with their respective attributes (waiting time, space available while waiting to cross, number of pedestrians, one-way or two-way street, state of the road surface, road width, vehicle speed, visibility, lighting conditions, guardrails, absence of obstacles in vicinity, state of sidewalks, lowered kerb, pedestrian signals, central island), which may be utilized in the evaluation. The first step was to ascertain the relative importance, from the point of view of the pedestrian, of the Performance Measures employed. Then the level-of-service (LOS), as perceived by the users, was determined for each of the pedestrian crossings in the survey, on the basis of the users’ level of satisfaction with each attribute. Khisty’s methodology makes it possible to relate the overall level of satisfaction with a qualitative LOS for the pedestrian facility under analysis. The chosen methodology was adapted to the Brazilian context, in a case study carried out in the city of São Paulo (Brazil), in collaboration with the local Traffic Engineering Corporation (Companhia de Engenharia de Tráfego, CET-SP). To this end, four pedestrian crossings at road junctions with traffic lights were analysed. The qualitative LOS obtained were compared to the quantitative LOS, calculated according to the Highway Capacity Manual (TRB 2000).     

Modeling pedestrian queuing using micro-simulation

The system considered is a cinema ticketing booth system. A general simulation algorithm is presented as well as the system’s operating characteristics. The results of the experiment were verified by comparing them with video observation data and theoretical values. Finally, with comparative analysis of experiment data, the developed simulation model was able to replicate the situation in which pedestrians find an available booth to occupy while waiting in a queue. The model can facilitate the availability of various pedestrian flows and a range of operating times. With some efforts of computer programming, the situations where multiple booths are available were simulated to identify pedestrian movement. The developed simulation model captures important details, such as travel time, wait time, queue length and the number of waiting pedestrians with the different number of pedestrian flows and booths. The paper presents a means to designing the pedestrian operation and plan on the basis of the estimated number of people.     

Planning for pedestrian networks in North American downtowns

While North American urban regions are served by mechanical modes of transportation, downtowns are largely pedestrian environments. The growth and consolidation of office districts over the last twenty years have revived interest in developing coherent and efficient pedestrian networks, which can be coordinated with other transportation needs within the downtown. Ambitious plans for expansion of the downtown for offices, the retail and service industries as well as for housing and entertainment have been adopted in many North American cities during the 1980s. The successful integration of these large central areas depends to a considerable extent on the implementation of expanded pedestrian networks. This paper discusses certain spatial characteristics of North American cities which call for specific network designs and research into the walking environments of central areas. More knowledge is needed of the relative contributions to pedestrian regeneration of land use combinations, the design of networks and of walking paths.     

Development of destination choice models for pedestrian travel

Most research on walking behavior has focused on mode choice or walk trip frequency. In contrast, this study is one of the first to analyze and model the destination choice behaviors of pedestrians within an entire region. Using about 4500 walk trips from a 2011 household travel survey in the Portland, Oregon, region, we estimated multinomial logit pedestrian destination choice models for six trip purposes. Independent variables included terms for impedance (walk trip distance), size (employment by type, households), supportive pedestrian environments (parks, a pedestrian index of the environment variable called PIE), barriers to walking (terrain, industrial-type employment), and traveler characteristics. Unique to this study was the use of small-scale destination zone alternatives. Distance was a significant deterrent to pedestrian destination choice, and people in carless or childless households were less sensitive to distance for some purposes. Employment (especially retail) was a strong attractor: doubling the number of jobs nearly doubled the odds of choosing a destination for home-based shopping walk trips. More attractive pedestrian environments were also positively associated with pedestrian destination choice after controlling for other factors. These results shed light on determinants of pedestrian destination choice behaviors, and sensitivities in the models highlight potential policy-levers to increase walking activity. In addition, the destination choice models can be applied in practice within existing regional travel demand models or as pedestrian planning tools to evaluate land use and transportation policy and investment scenarios.     

An examination of factors affecting propensities to use bicycle and pedestrian facilities in suburban locations

The US federal Congestion Mitigation and Air Quality program was created to fund transportation projects that have the potential to contribute to the attainment or maintenance of the National Ambient Air Quality Standards. This study evaluates a random sample of eight suburban bicycle and pedestrian facilities funded by the Congestion Mitigation and Air Quality Program in the Chicago metro area. Users of these facilities were randomly sampled using a “time-based” user sampling approach and surveyed in intercept mode to implement a recall-based evaluation design. A random intercept logit model was used to explain variations in the propensity to switch from single occupant vehicle use to bicycling or walking, using attributes of users and sites. The analysis shows relatively low usage levels but that substitution of motorized modes have resulted, potentially leading to improved air quality outcomes.     

A model of pedestrians’ intended waiting times for street crossings at signalized intersections

For the purposes of both traffic-light control and the design of roadway layouts, it is important to understand pedestrian street-crossing behavior because it is not only crucial for improving pedestrian safety but also helps to optimize vehicle flow. This paper explores the mechanism of pedestrian street crossings during the red-man phase of traffic light signals and proposes a model for pedestrians’ waiting times at signalized intersections. We start from a simplified scenario for a particular pedestrian under specific traffic conditions. Then we take into account the interaction between vehicles and pedestrians via statistical unconditioning. We show that this in general leads to a U-shaped distribution of the pedestrians’ intended waiting time. This U-shaped distribution characterizes the nature of pedestrian street-crossing behavior, showing that in general there are a large proportion of pedestrians who cross the street immediately after arriving at the crossing point, and a large proportion of pedestrians who are willing to wait for the entire red-man phase. The U-shaped distribution is shown to reduce to a J-shaped or L-shaped distribution for certain traffic scenarios. The proposed statistical model was applied to analyze real field data.     

Facing the realities of non-motorized transportation in developing countries

The objective of this paper is to assess issues concerning non-motorized transportation in developing countries. This assessment is done through an examination of three topics: a brief overview of the transportation picture in developing countries; a study of city size and city form vis-a-vis pedestrian movement; and, a look at the characteristics of non-motorized modes, including their capacities. An analysis and discussion attempt to sort out the crucial issues connected with pedestrian planning in particular, and non-motorized transport in general. It is concluded (1) that special attention be paid to space/time capacity/cost issues connected with non-motorized modes (2)that some of the low-cost intermediate technology modes be examined for possible inclusion in traffic streams (3)that land-use patterns need to be rearranged keeping in mind the limitations of non-motorized modes, and (4)that the extent to which physical trip-making can be substituted by telecommunication needs to be examined very critically. An agenda for action reflects these concerns.     

Optimization of mid-block pedestrian crossing network with discrete demands

In many cases, pedestrian crossing demands are distributed discretely along an arterial segment. Demand origins, destinations and crosswalks comprise a pedestrian crossing network. An integrated model for optimizing the quantity, locations and signal settings of mid-block crosswalks simultaneously is proposed to best trade-off the operational performances between pedestrians and vehicles. Pedestrian behavior of choosing crosswalks is captured under a discrete demand distribution. Detour distance and delay at signalized crosswalks are formulated as a measure of pedestrian crossing cost. Maximum bandwidths are modeled in analytical expressions as a measure of vehicular cost. To solve the proposed model, the Non-dominated Sorting Genetic Algorithm II (NSGA II) based algorithm is designed and employed to obtain the Pareto frontier efficiently. From the numerical study, it is found that there exists an optimal number of mid-block crosswalks. Excess available crosswalks may make no contributions to improvement in pedestrian cost when the constraint of the minimum interval between crosswalks and vehicular cost are taken into account. Two-stage crosswalks are more favorable than one-stage ones for the benefits of both pedestrian and vehicles. The study results show promising properties of the proposed method to assist transportation engineers in properly designing mid-block crosswalks along a road segment.     

Survey of pedestrians' crossing time at non‐signalized mid‐block street crossing

At non‐signalized mid‐block street crossings in China's cities, pedestrians often weave between motor vehicle flows. This paper investigated the influence patterns of the gender and age of pedestrians, the presence of a pedestrian group, vehicles' interference and the crossing direction on the crossing time at non‐signalized mid‐block street crossings in Changsha, China. The results show that the crossing speed is approximately 1–1.1 m/s; the crossing time increases with increasing age, and the crossing speed of a pedestrian will be quicker when the time gap between the pedestrian and the oncoming vehicle is smaller if he/she decides to cross. This paper also analyzed the crossing time pattern when pedestrians cross lane by lane and found that pedestrians spend the most time crossing the first lane and the least time crossing the middle lane, regardless of whether they are crossing from the curb to the central island or from the central island to the curb. The crossing speed is an important input to the design of pedestrian facilities, so these findings can be applied to the assessment of pedestrian crossing safety in China's cities and can provide a basis for the design of pedestrian crossing facilities. Copyright © 2017 John Wiley & Sons, Ltd.     

Driver's braking behavior approaching pedestrian crossings: a parametric duration model of the speed reduction times

The driver's braking behavior while approaching zebra crossings under different safety measures (curb extensions, parking restrictions, and advance yield markings) and without treatment (baseline condition) was examined. The speed reduction time was the variable used to describe the driver's behavior. Forty‐two drivers drove a driving simulator on an urban scenario in which the baseline condition and the safety measures were implemented. The speed reduction time was modeled with a parametric duration model to compare the effects on driver's braking behavior of vehicle dynamic variables and different countermeasures. The parametric accelerated failure time duration model with a Weibull distribution identified that the vehicle dynamic variables and only the countermeasure curb extensions affected, in a statistically significant way, the driver's speed reduction time in response to a pedestrian crossing. This result shows that the driver, because of the improved visibility of the pedestrian allowed by the curb extensions, was able to receive a clear information and better to adapt his approaching speed to yield to the pedestrian, avoiding abrupt maneuvers. This also means a reduction of likelihood of rear‐end collision due to less aggressive braking. Copyright © 2016 John Wiley & Sons, Ltd.     

Converting mixed pedestrian flows into equivalent commuters using standard pedestrian equivalent factors

This paper develops the concept of standard pedestrian equivalent (SPE) factors for converting a mixed pedestrian flow into an equivalent commuter flow. After a comprehensive review of passenger car equivalent (PCE) methodologies, the equal total travel time method is utilised for SPE estimation. A micro-simulation approach is employed for the formulation of the total travel time–flow relationship. Field data collected on walking speed distributions for commuters and older adults in Australia are used as model inputs. An independent samples t-test confirms the significant difference between walking speeds of commuters and older adults. For this paper, a unidirectional flow on flat walkways is initially considered and evaluated across proportions of older people, different flows and different walkway widths. The introduction of older adults significantly increases total travel time especially under congested conditions. Results of this investigation can be used for evaluation or design of pedestrian facilities experiencing similar flow conditions.     

Validation of an agent-based microscopic pedestrian simulation model in a crowded pedestrian walking environment

This study validates a recently developed agent-based pedestrian micro-simulation model in a crowded walking environment. The model is applied to simulate pedestrian movements at a major street in the downtown Vancouver area. The street was closed for traffic to allow people attending a social event to leave the area safely. The calibration of model parameters is conducted using a Genetic Algorithm that minimizes the error between simulated and actual trajectories, acquired by means of computer vision. Validation results confirm the accuracy of the simulated trajectories, as the average error between the actual and simulated trajectories is found to be 0.28?m, and the average error in walking speed is just 0.06 m/s. Furthermore, results show that the model is capable of reproducing the actual behavior of pedestrians during different interactions with high accuracy (more than 94% for most interactions).     

A fine discrete field cellular automaton for pedestrian dynamics integrating pedestrian heterogeneity,anisotropy, and time-dependent characteristics

This paper proposes a discrete field cellular automaton (CA) model that integrates pedestrian heterogeneity, anisotropy, and time-dependent characteristics. The pedestrian movement direction, moving/staying, and steering are governed by the transfer equations. Compared with existing studies on fine-discretized CA models, the proposed model is advantageous in terms of flexibility, higher spatial accuracy, wider speed range, relatively low computational cost, and elaborated conflict resolution with synchronous update scheme. Three different application scenarios are created by adjusting the definite conditions of the model: (1) The first one is a unidirectional pedestrian movement in a channel, where a complete jam in the high-density region is observed from the proposed model, which is missing from existing floor field CA models. (2) The second one is evacuation from a room, where the evacuation time is independent of the discretization factor, which is different from previous work. (3) The third one is an ascending evacuation through a 21-storey stair system, where pedestrians move with constant speed or with fatigue. The evacuation time in the latter case is nearly twice of that in the former.     

Modeling the effect of electric vehicle adoption on pedestrian traffic safety: An agent-based approach

When operated at low speeds, electric and hybrid vehicles have created pedestrian safety concerns in congested areas of various city centers, because these vehicles have relatively silent engines compared to those of internal combustion engine vehicles, resulting in safety issues for pedestrians and cyclists due to the lack of engine noise to warn them of an oncoming electric or hybrid vehicle. However, the driver behavior characteristics have also been considered in many studies, and the high end-prices of electric vehicles indicate that electric vehicle drivers tend to have a higher prosperity index and are more likely to receive a better education, making them more alert while driving and more likely to obey traffic rules. In this paper, the positive and negative factors associated with electric vehicle adoption and the subsequent effects on pedestrian traffic safety are investigated using an agent-based modeling approach, in which a traffic micro-simulation of a real intersection is simulated in 3D using AnyLogic software. First, the interacting agents and dynamic parameters are defined in the agent-based model. Next, a 3D intersection environment is created to integrate the agent-based model into a visual simulation, where the simulation records the number of near-crashes occurring in certain pedestrian crossings throughout the virtual time duration of a year. A sensitivity analysis is also carried out with 9000 subsequent simulations performed in a supercomputer to account for the variation in dynamic parameters (ambient sound level, vehicle sound level, and ambient illumination). According to the analysis, electric vehicles have a 30% higher pedestrian traffic safety risk than internal combustion engine vehicles under high ambient sound levels. At low ambient sound levels, however, electric vehicles have only a 10% higher safety risk for pedestrians. Low levels of ambient illumination also increase the number of pedestrians involved in near-crashes for both electric vehicles and combustion engine vehicles.     

An assessment of models to estimate pedestrian demand based on the level of activity

This paper presents the development and assessment of models to estimate pedestrian demand based on the level of pedestrian activity (high and low). As activity varies by the time of the day, temporal variations were evaluated by considering different time periods. Data collected at 128 low and 48 high pedestrian activity signalized intersections (a total of 176 signalized intersections) in the City of Charlotte, North Carolina were used to develop and assess the models using stepwise regression analysis through backward elimination of independent variables (includes demographic, land use, and network characteristics). The use of different buffer widths (proximal area) to extract these characteristics was also evaluated. Results, in general, show that pedestrian demand varied by the level of activity, explanatory variables extracted by buffer width, and time of the day. The estimates from the models could be used in transportation planning (identify required pedestrian facilities, resource allocation), safety, and operational analyses. Copyright © 2010 John Wiley & Sons, Ltd.     

Potential-based dynamic pedestrian flow assignment

This study proposes a potential-based dynamic pedestrian flow assignment model to optimize the evacuation time needed for all pedestrians to leave an indoor or outdoor area with internal obstacles and multiple exits, e.g., railway station, air terminal, plaza, and park. In the model, the dynamic loading of pedestrian flows on a two-dimensional space is formulated by a cell transmission model, the movement of crowds is driven by space potential, and the optimization of evacuation time is solved by a proportional swapping process. In this way, the proposed model can be applied to not only efficiently optimize the evacuation process of a crowd with large scale but also recognize local congestion dynamics during crowd evacuation. Finally, a set of numerical examples are presented to show the proposed model’s effectiveness for optimizing crowd evacuation process and its application to design a class of variable guide sign systems.     

Mapping spatial accessibility of public transportation network in an urban area – A case study of Shanghai Hongqiao Transportation Hub

Accessibility is a key metric when assessing the efficiency of an urban public transportation network. This research develops a methodology for evaluating spatial accessibility of a system with multiple transportation modes in an urban area, Shanghai Hongqiao Transportation Hub (SHTH) and its surrounding area. The method measured total traveling time as an accessibility indicator, which summed the time people spent on walking, waiting, transfer and transportation in a journey from the SHTH to destinations. Spatial accessibility was classified into five levels from very high to very low. The evaluation was conducted at a cell-by-cell basis under an overall scenario and three specific scenarios. Evaluation results were presented in a series of maps. The overall accessibility scenario shows a concentric-ring trend decreasing from the SHTH to the fringe of the study area. Areas along the metro lines generally have a much higher accessibility than those along the bus lines with some exceptions where bus routes play a more important role. Metro stations identified as either time-saving or time-consuming points are mainly distributed around the urban center. Some suggestions are proposed for improving accessibility of public transportation network in the study area. The results from this study provide a scientific basis and useful information for supporting decision-making on urban planning, and assisting dwellers to travel in a time-efficient manner. The methodology offers a simple, flexible way to the spatial evaluation, metro station identification and network modification of accessibility of public transportation systems with multiple transportation modes.     

Waiting zones for realistic modelling of pedestrian dynamics: A case study using two major German railway stations as examples

The value of a pedestrian stream simulation depends on its ability to reproduce natural behaviour of pedestrians in different situations. Most models assume that pedestrians are single-minded and constantly move towards their destinations. However, our observations at two major German railway stations made during field experiments and our analysis of video recordings at one of these stations revealed that in virtually every setting a significant proportion of pedestrians do not walk continuously. Instead, they occasionally change their route in order to visit certain locations and stand there for a period of time. By waiting, they often block walking pedestrians and thereby influence the overall dynamics.In this paper, we evaluate the impact of waiting pedestrians and propose a model for waiting pedestrians based on cellular automata. The model is able to reproduce the observed pedestrian behaviour. We illustrate the model with simulations of several real life scenarios for a major German railway station and show that during rush hour standing pedestrians may prolong walking time by up to nearly 20%. We also demonstrate how the developed model can be used for the analysis of infrastructures, and prediction of problematic areas in public spaces.     

HMB Reflectors: A New Horizontal Retro‐reflecting System to Improve Safety at Pedestrian Crossings

Abstract

Each year more than 1000 pedestrians are injured in accidents on pedestrian crossings in Switzerland. The accidents often occur in darkness, twilight or poor visibility during rain at locations without sufficient public street lighting because vehicle drivers notice the pedestrian crossing too late or overlook it altogether. Pedestrian crossings can be made significantly easier for vehicle drivers to recognize at night and in poor visibility by means of HMB reflectors. When crossing sites are made more conspicuous with high horizontal retro‐reflecting markers, the readiness to stop increases. The reflectors can thus contribute to improving road safety at pedestrian crossings. This new low‐cost measure has a wide range of applications. The new reflector system is currently gaining ground in Switzerland and several other European countries.