共查询到20条相似文献,搜索用时 46 毫秒
1.
区域内岩土条件的差异性影响着公路建设项目技术标准的确定和投资规模,现有的公路自然区划多以气候为指标划分,在实际公路建设中的实用性和针对性不强,因此研究省级公路岩土区划显得十分必要。在充分考虑山东省公路网规划目标及经济发展需要的基础上,确定了山东省公路岩土区划研究框架及指标体系,利用 ArcGIS 技术平台,将山东省按其岩土条件进行区划分区,完成了“山东省1∶200万 km岩土区划图”并对各个分区的岩土工程特性进行了说明。研究成果可为山东省公路工程的规划设计、建设施工及运营养护等的趋利避害及材料的合理有效使用提供科学依据,为山东省公路综合自然区划图的编制提供基础资料,对我国其他省、区、市开展公路自然区划的相关研究具有重要参考价值。 相似文献
2.
新疆公路三级自然区划 总被引:3,自引:0,他引:3
为了使新疆公路自然区划的分区更加符合实际,以满足不同地域的公路建设需要。根据新疆地貌、气候、水文、水文地质、岩土类型等自然条件的基本特征及对公路建设的影响,提出了新疆公路三级自然区划应遵循公路自然条件的异同性、综合性和主导因素相结合、地方性和实用性的区划原则,以及采用自上而下的顺序划分和自下而上的合并法、公路工程地理相关分析基础上的主导标志法、部门区划和类型图叠置法的3种区划方法,确定了以地貌类型、地貌外动力作用、岩土类型为主导标志的区划标志,建立了新疆公路三级自然区划的划分体系。 相似文献
3.
4.
为提高青海省公路桥涵设计流量的计算精度,在省内1991年公路桥涵既有水文分区和设计流量公式的基础上,比较青海省水利部门相关水文分区,以水系流域等定性指标为指导,选取年平均径流量、年平均降水量、气候带、河流补给形式、单位面积上50 a-遇设计流量等5个因素为水文因子,对省内原有的黄河上游区、湟水大通河区等2个区进行了模糊聚类分析,对原有的玉树区、柴达木区、青海湖区、祁连山区等4个区进行了定性论证.将全省原有的6个分区,重新划分为7个产流区和1个非产流区.经误差分析,2012年新的公路桥涵水文分区图和设计流量计算公式,使用便利,计算精度较旧公式有所提高,可以指导全省公路桥涵建设工作. 相似文献
5.
中国公路沙漠自然区划研究 总被引:1,自引:1,他引:0
为了满足公路工程建设的多样性、层次性需求,揭示沙漠地区自然环境要素的时空分布规律及其对公路建设的影响,进行中国公路沙漠自然区划。结合沙漠地区公路建设及区域非地带性分异规律,基于一般区划原则,提出了采用综合性原则和主导因素原则相结合、主导指标和辅助指标相结合的公路沙漠自然区划方法。形成了以沙漠综合状态指数为主要指标;以沙丘高度、风沙强度、植被覆盖和气温年较差等自然环境要素为辅助指标的公路沙漠区划指标体系。制定了中国公路沙漠自然区划的分区方案,并采用地理位置 强度 名称的3段命名方法,将中国公路沙漠区划为3个区:东部弱中强度影响区,中部中强强度影响区,西部中弱强度影响区,进而得出中国公路沙漠自然区划图。 相似文献
6.
7.
8.
9.
10.
11.
针对互通式立交出口可能出现的多种情况,结合工程实践,探讨其设计技术问题,提出设计思路及技术对策,并在技术分析中强调融入“安全至上”“动态设计”“灵活性设计”“宽容性设计”等设计新理念,使出口设计安全、合理. 相似文献
12.
13.
水泥混凝土安全护栏 总被引:1,自引:0,他引:1
赵文光 《筑路机械与施工机械化》1994,11(2):9-14
通过水泥混凝土安全护栏在道路交通中的实际应用,对其结构形式和主要参数以及具体的施工方法进行了较为详实的叙述,并对比介绍了水泥混凝土安全护栏的使用效果。 相似文献
14.
盾构隧道施工风险与规避对策 总被引:7,自引:2,他引:5
归纳地铁安全事故的类型及特点,介绍目前国内外盾构隧道情况,尤其是北京盾构隧道情况,分析盾构隧道施工的优点和不足之处,论述盾构隧道施工风险研究的必要性。重点分析盾构隧道施工的11种主要风险,即:地质预报准确性、盾构机适应性和可靠性、盾构进出洞施工、开挖面失稳、盾尾密封失效、软硬不均且差异性较大地层施工、较大的地层损失及不均匀沉降、开挖面有障碍物、隧道上浮、联络通道施工、明挖基础失稳等,并一一提出切实的规避对策。同时对国内外盾构隧道施工事故典型案例的情况及原因进行详细介绍和剖析。可为今后盾构隧道施工风险的分析、预测、防范及规避提供指导。 相似文献
15.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(12):1681-1694
A bicycle or inverted pendulum can be balanced, that is kept nearly upright, by accelerating the base. This balance is achieved by steering on a bicycle. Simultaneously one can also control the lateral position of the base: changing of the track line of a bike or the position of hand under a balanced stick. We show here with theory and experiment that if the balance problem is removed, by making the system neutrally stable for balance, one cannot simultaneously maintain balance and control the position of the base. We made a bricycle, essentially a bicycle with springy training wheels. The stiffness of the training wheel suspension can be varied from near infinite, making the bricycle into a tricycle, to zero, making it effectively a bicycle. The springy training wheels effectively reduce or even negate gravity, at least for balance purposes. One might expect a smooth transition from tricycle to bicycle as the stiffness is varied, in terms of handling, balance and feel. Not so. At an intermediate stiffness, when gravity is effectively zeroed, riders can balance easily but no longer turn. Small turns cause an intolerable leaning. Thus there is a qualitative difference between bicycles and tricycles, a difference that cannot be met halfway. 相似文献
16.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(10):1575-1596
Steering feel, or steering torque feedback, is widely regarded as an important aspect of the handling quality of a vehicle. Despite this, there is little theoretical understanding of its role. This paper describes an initial attempt to model the role of steering torque feedback arising from lateral tyre forces. The path-following control of a nonlinear vehicle model is implemented using a time-varying model predictive controller. A series of Kalman filters are used to represent the driver's ability to generate estimates of the system states from noisy sensory measurements, including the steering torque. It is found that under constant road friction conditions, the steering torque feedback reduces path-following errors provided the friction is sufficiently high to prevent frequent saturation of the tyres. When the driver model is extended to allow identification of, and adaptation to, a varying friction condition, it is found that the steering torque assists in the accurate identification of the friction condition. The simulation results give insight into the role of steering torque feedback arising from lateral tyre forces. The paper concludes with recommendations for further work. 相似文献
17.
目前国内为了片面地提高路面强度来解决抗车辙能力,在沥青混合料原材料选用和组成设计中存在着误区,出现了其它质量问题。通过误区的提出和解决对策的探讨,期望能对公路设计者、建设者和养护者们提供一些参考,减少公路病害,降低养护成本,提高公路使用质量。 相似文献
18.
19.
20.
在汽车各部位,发动机发生故障的几率最高。为了寻找这些故障是由哪些因素引起、这些因素在发动机生命期各阶段的分布和它们如何引起发动机故障,通过搜集大量不同型号发动机发生的故障并统计和分析这些故障的成因,从中分离出发动机故障与设计、制造缺陷及使用与维护不当的关系。这为主动改善汽车发动机生命期质量提供了一种新的方法。 相似文献