共查询到20条相似文献,搜索用时 46 毫秒
1.
2.
利用非线性反馈控制悬架系统的混沌行为 总被引:2,自引:0,他引:2
基于磁流变减振器的汽车悬架系统具有明显的滞后非线性,这直接导致了系统存在分岔与混沌的可能性。分析了悬架系统在路面单频正弦激励下的受迫振动,揭示了该系统存在混沌运动可能性。在此基础上,利用非线性反馈控制方法对这类混沌行为进行了控制,并采用Melnikov方法确定该控制系统的增益系数。 相似文献
3.
基于磁流变减振器的汽车悬架系统具有明显的滞后非线性,这直接导致了系统存在分岔与混沌的可能性。章分析了其在路面单频正弦激励下的受迫振动,揭示了该系统存在混沌运动的可能性,并在此基础上,利用非线性反馈控制方法对这类混沌行为进行了控制,并采用Melnikov方法确定了该控制系统的增益系数。 相似文献
4.
5.
半主动悬架电子控制系统的研究 总被引:1,自引:0,他引:1
简要介绍半主动悬架及其电子控制系统的构成.这种半主动悬架系统可根据路面的激励输入,自动实现悬架阻尼参数的无级调节,性能上远远优于被动悬架而接近主动悬架. 相似文献
6.
二分之一车辆悬架系统的动力学仿真研究 总被引:3,自引:0,他引:3
建立了二分之一车辆悬架系统的数学模型,应用MATLAB/Simulink建立该系统的仿真模型,对车辆以两种速度分别通过台阶和坡路时悬架各性能指标的响应进行研究,分析不同路面激励、不同速度对悬架性能的影响;提出在悬架设计时应考虑车辆行驶在特殊路面的情况以实现悬架参数最佳匹配,从而使悬架性能达到最优,扩大悬架在更大范围内的适应性和实用性。 相似文献
7.
8.
9.
基于汽车系统动力学和随机振动理论,建立了简化的人体-座椅、车身及车轮3-DOF车辆振动模型,采用线性滤波白噪声法建立了路面激励模型,并仿真分析了常见C级路面的不平度特性。以C级随机路面激励为车辆振动系统输入,运用变步长四阶Runge-Kutta法求解了车辆系统数学模型。在时域和频域两方面,仿真分析了座椅刚度、阻尼,悬架刚度、阻尼及轮胎刚度对座椅、悬架性能的影响,以及路面不平度和车速对座椅垂向加权加速度的影响。得出了座椅加速度、悬架动挠度、轮胎动载荷功率谱密度随座椅刚度、阻尼系数,悬架刚度、阻尼系数及轮胎刚度变化的规律。 相似文献
10.
11.
12.
针对互通式立交出口可能出现的多种情况,结合工程实践,探讨其设计技术问题,提出设计思路及技术对策,并在技术分析中强调融入“安全至上”“动态设计”“灵活性设计”“宽容性设计”等设计新理念,使出口设计安全、合理. 相似文献
13.
水泥混凝土安全护栏 总被引:1,自引:0,他引:1
赵文光 《筑路机械与施工机械化》1994,11(2):9-14
通过水泥混凝土安全护栏在道路交通中的实际应用,对其结构形式和主要参数以及具体的施工方法进行了较为详实的叙述,并对比介绍了水泥混凝土安全护栏的使用效果。 相似文献
14.
盾构隧道施工风险与规避对策 总被引:7,自引:2,他引:5
归纳地铁安全事故的类型及特点,介绍目前国内外盾构隧道情况,尤其是北京盾构隧道情况,分析盾构隧道施工的优点和不足之处,论述盾构隧道施工风险研究的必要性。重点分析盾构隧道施工的11种主要风险,即:地质预报准确性、盾构机适应性和可靠性、盾构进出洞施工、开挖面失稳、盾尾密封失效、软硬不均且差异性较大地层施工、较大的地层损失及不均匀沉降、开挖面有障碍物、隧道上浮、联络通道施工、明挖基础失稳等,并一一提出切实的规避对策。同时对国内外盾构隧道施工事故典型案例的情况及原因进行详细介绍和剖析。可为今后盾构隧道施工风险的分析、预测、防范及规避提供指导。 相似文献
15.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(12):1681-1694
A bicycle or inverted pendulum can be balanced, that is kept nearly upright, by accelerating the base. This balance is achieved by steering on a bicycle. Simultaneously one can also control the lateral position of the base: changing of the track line of a bike or the position of hand under a balanced stick. We show here with theory and experiment that if the balance problem is removed, by making the system neutrally stable for balance, one cannot simultaneously maintain balance and control the position of the base. We made a bricycle, essentially a bicycle with springy training wheels. The stiffness of the training wheel suspension can be varied from near infinite, making the bricycle into a tricycle, to zero, making it effectively a bicycle. The springy training wheels effectively reduce or even negate gravity, at least for balance purposes. One might expect a smooth transition from tricycle to bicycle as the stiffness is varied, in terms of handling, balance and feel. Not so. At an intermediate stiffness, when gravity is effectively zeroed, riders can balance easily but no longer turn. Small turns cause an intolerable leaning. Thus there is a qualitative difference between bicycles and tricycles, a difference that cannot be met halfway. 相似文献
16.
《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》2012,50(10):1575-1596
Steering feel, or steering torque feedback, is widely regarded as an important aspect of the handling quality of a vehicle. Despite this, there is little theoretical understanding of its role. This paper describes an initial attempt to model the role of steering torque feedback arising from lateral tyre forces. The path-following control of a nonlinear vehicle model is implemented using a time-varying model predictive controller. A series of Kalman filters are used to represent the driver's ability to generate estimates of the system states from noisy sensory measurements, including the steering torque. It is found that under constant road friction conditions, the steering torque feedback reduces path-following errors provided the friction is sufficiently high to prevent frequent saturation of the tyres. When the driver model is extended to allow identification of, and adaptation to, a varying friction condition, it is found that the steering torque assists in the accurate identification of the friction condition. The simulation results give insight into the role of steering torque feedback arising from lateral tyre forces. The paper concludes with recommendations for further work. 相似文献
17.
18.
19.
高速公路沥青路面养护与维修方案的选择与设计 总被引:4,自引:0,他引:4
描述系统化的高速公路沥青路面养护与维修方案选择和设计的过程和方法,包括数据的需求采集、现有路况的定性定量评价、养护措施的选择、可行养护与维修方案的生成和设计、备选方案的评估等。由于高速公路具有交通量大、社会影响大的特点,文中重点提出在选择维修方案过程中,需预先分析与不同维修方案相关的交通控制策略及施工规划组织,以对不同可行方案进行全面的评估,从中选取最佳的维修养护方案。 相似文献
20.
汽车制动过程的计算机模拟分析 总被引:5,自引:0,他引:5
通过建立汽车制动过程的数字模型,用计算机模拟分析了汽车的制动响应及各种敏感因素对它的影响,同时,进一步分析了引起汽后前后轮先后抱死拖滑的主要原因和影响程度,为汽车制动和制动稳定性的研究提供了参考。 相似文献