Assessment of IACS-CSR implicit safety levels for buckling strength of stiffened panels for double hull tankers

The present study aims at applying structural reliability methods to assess the implicit safety levels of the buckling strength requirements for longitudinal stiffened panels implemented in the IACS Common Structural Rules (CSR) for double hull oil tankers. The buckling strength requirements considered are used in the initial stage of the hull girder scantlings’ design to control the buckling capacity of longitudinal stiffened panels subjected to the compressive loads induced by the hull girder vertical bending. The following buckling collapse failure modes are explicitly considered in the design formulation: uniaxial buckling of the plating between stiffeners, column buckling of stiffeners with attached plating and lateral-torsional buckling or tripping of stiffeners.The paper presents the procedure used to assess the implicit safety levels of the strength requirements for the three buckling collapse failure modes above mentioned, which includes the optimization of the scantlings of the plate panels and longitudinal stiffeners in order to reflect the minimum strength required by the formulation. A first order reliability formulation is adopted, and stochastic models proposed in the literature are used to quantify the uncertainty in the relevant design variables. A sample of five oil tankers representative of the range of application of the IACS-CSR design rules is considered. The effect of corrosion in the implicit safety levels is quantified based on the three corrosion levels of the Net Thickness Approach (NTA) adopted in the design rules. Sensitivity analyses are also performed to quantify the relative contribution or importance of each design random variable to the implicit safety levels.     

加筋板格高级屈曲分析技术研究及软件开发

文章给出了基于弹性大挠度理论和刚塑性分析的加筋板格高级屈曲分析方法(EPM),该方法包括五种失效模式,即正交加筋板格整体屈曲、纵向加筋子板格整体屈曲、纵向加筋和带板的局部屈曲或屈服、纵向加筋的侧倾以及全部屈服,可以考虑初始挠度和残余应力的影响以及双向压缩和侧向载荷的联合作用。以EPM方法为核心开发了加筋板格高级屈曲分析软件系统,包括任务管理、数据输入、屈曲分析、结果查看、能力曲线和文件分析等六个模块。为验证EPM方法的精度进行了系列纵向加筋和正交加筋板格试验模型的比较计算,并计算了四种典型加筋板格的双向应力能力曲线,与板格极限状态分析（PULS）软件和协调共同结构规范（HCSR）方法进行了比较分析。结果表明EPM方法可以分析联合载荷等因素对加筋板格极限强度的影响,文中开发的软件系统可用于加筋板格高级屈曲分析。     

Evaluation of ultimate strength of stiffened panels under longitudinal thrust

A series of collapse analyses is performed applying nonlinear FEM on stiffened panels subjected to longitudinal thrust. MSC.Marc is used. Numbers, types and sizes of stiffeners are varied and so slenderness ratio as well as aspect ratio of local panels partitioned by stiffeners keeping the spacing between adjacent longitudinal stiffeners the same. Initial deflection of a thin-horse mode is imposed on local panels and that of flexural buckling and tripping modes on stiffeners to represent actual initial deflection in stiffened panels in ship structures. On the basis of the calculated results, buckling/plastic collapse behaviour of stiffened panels under longitudinal thrust is investigated. The calculated ultimate strength are compared with those obtained by applying several existing methods such as CSR for bulk carriers and PULS. Simple formulas for stiffened panels, of which collapse is dominated fundamentally by the collapse of local panels between longitudinal stiffeners, are also examined if they accurately estimate the ultimate strength. Through comparison of the estimated results with the FEM results, it has been concluded that PULS and modified FYH formulas fundamentally give good estimation of the ultimate strength of stiffened panels under longitudinal thrust.     

Compressive tests on short continuous panels

Results of eight tests on stiffened panels under axial compression until collapse and beyond are presented. The tests consider panels with different combinations of mechanical material properties and geometric configurations for the stiffeners including the use of ‘U’-shaped stiffeners. The specimens are three bay panels with associated plate made of high tensile steel S690. Four different configurations are considered for the stiffeners that are made of mild or high tensile steel for bar stiffeners and mild steel for ‘L’ and ‘U’ stiffeners. The influence of the stiffener's geometry on the ultimate strength of the stiffened panels under compression is analyzed.     

波浪中船体梁后极限强度特性的实验评估(英文)

Experimental investigations into the collapse behavior of a box-shape hull girder subjected to extreme wave-induced loads are presented.The experiment was performed using a scaled model in a tank.In the middle of the scaled model,sacrificial specimens with circular pillar and trough shapes which respectively show different bending moment-displacement characteristics were mounted to compare the dynamic collapse characteristics of the hull girder in waves.The specimens were designed by using finite element(FE)-analysis.Prior to the tank tests,static four-point-bending tests were conducted to detect the load-carrying capacity of the hull girder.It was shown that the load-carrying capacity of a ship including reduction of the capacity after the ultimate strength can be reproduced experimentally by employing the trough type specimens.Tank tests using these specimens were performed under a focused wave in which the hull girder collapses under once and repetitive focused waves.It was shown from the multiple collapse tests that the increase rate of collapse becomes higher once the load-carrying capacity enters the reduction path while the increase rate is lower before reaching the ultimate strength.     

Ultimate strength of container ships subjected to combined hogging moment and bottom local loads,Part 2: An extension of Smith's method

This paper is the second of two companion papers concerning the ultimate hull girder strength of container ships subjected to combined hogging moment and bottom local loads. The nonlinear finite element analysis in Part 1 has shown that local bending deformation of a double bottom due to bottom lateral loads significantly decreases the ultimate hogging strength of container ships. In this Part 2, extending Smith's method for pure bending collapse analysis of a ship's hull girder, a simplified method of progressive collapse analysis of ultimate hogging strength of container ships considering bottom local loads is developed. The double bottom is idealized as a plane grillage and the rest part of the cross section as a prismatic beam. An average stress-average strain relationship of plate/stiffened plate elements employed in Smith's method is transformed into an average stress-average plastic strain relationship, and implemented in the conventional beam finite element as a pseudo strain hardening/softening behaviors. The extended Smith's method is validated through a comparison with nonlinear finite element analysis.     

Parametric dependencies of the post-ultimate strength behavior of a ship’s hull girder in waves

To rationally assess the consequence of a ship’s hull girder collapse, it is necessary to know the post-ultimate strength behavior of the hull girder including the global deformation and motions under extreme wave-induced loads. In the foregoing research, the authors proposed a numerical analysis system to predict the collapse behavior in waves including the post-ultimate strength behavior. The primary objective of the present paper is to clarify the parametric dependencies of the severity of the collapse in a rational manner. The parameters may include those related to load-carrying capacity and the extreme loads. To this end, an analytical solution to describe the post-ultimate strength behavior is derived. Assuming that a plastic hinge is formed at the midship during the collapse procedure, the whole ship is modeled as a two-rigid-bodies system connected to each other amidship via a nonlinear rotational spring, which represents the nonlinear relationship between the bending moment and the rotational angle. The relationship may be modeled as piece-wise linear curves. It is further assumed that large motions and elastic/plastic deformations of the hull girder may not affect the load evaluations, and that the hull girder is subjected to a large single wave. Some important parameters to predict the severity of the collapse are specified based on the analytical solution.     

A general scaled model design method of stiffened plate subjected to combined longitudinal compression and lateral pressure considering the ultimate strength and collapse modes

A general and efficient scaled method for stiffened plates subjected to combined longitudinal compression and lateral pressure is proposed based on slenderness, simply by adjusting the number of stiffeners. The design method makes it easier to determine the dimensions of the scaled model for a given scale ratio compared with the previously proposed method. The emphasis is on the influence of the plate slenderness, the column slenderness, and the non-dimensional parameter of the lateral pressure on the ultimate strength. By maintaining the consistency of the plate slenderness and column slenderness, the proposed method is applicable for designing scaled models with materials of different yield stresses and Young's moduli. A similar effect of the lateral pressure on the ultimate strength of the prototype and scaled models is achieved by maintaining the non-dimensional parameter. In addition, the applicability of the scaled method to the initial deflection is considered, which provides a reference for similar models. The similitude of the scaled method is verified for several typical buckling modes, including the beam–column, tripping, web and overall collapse modes. Given the numerical results, the proposed general and fast scaled method can provide reasonable dimensions of scaled stiffened plates subjected to combined loads.     

船体梁极限强度的近似计算

船体梁的总纵强度是反映船舶结构安全可靠的最基本的强度指标。船体结构极限强度评估对于船舶结构初步设计、使用、维护和维修都非常重要，因此船体梁极限强度研究成为近几十年来船舶工程界的热点研究课题之一。到目前为止有两种典型的加筋板和船体梁的极限强度分析方法，它们是直接计算法和逐步破坏分析法。本文基于加筋板单元的平均应力应变曲线和逐步破坏分拆方法，提出了加筋板和船体梁极限强度的简化分析方法，考虑了初始挠度和残余应力对加筋板单元极限强度的影响。数值结果表明，采用本文简化方法得到的结果与有限元计算结果或其它逐步破坏分析结果比较符合。     

Collapase analysis of ship hulls

This paper presents an efficient finite element procedure for the collapse analysis of ship hulls under complicated loads. A set of finite elements, such as beam-column elements, stiffened plate elements, and shear panel elements are developed, directly accounting for the geometrical and material non-linearities and initial imperfections.

Elastic-plastic stiffness matrices for elements have been derived by combining elastic large displacement analysis theories with a plastic hinge model. The buckling and post-buckling behaviour of plates is included using an effective width concept. The procedure is effective, since few mode-points are necessary and numerical integration for evaluating stiffness matrices is avoided. Fracture mechanics criteria are introduced in order to account for tension tearing rupture and brittle failure of the material.

Practical applications to ultimate longitudinal strength analysis of ship hulls and tanker collision analysis are presented. The procedure can also be used for collapse analysis of offshore and onshore structures.     

基于试验获取主应力应变曲线的油船极限强度评估研究(英文)

A geometrically similar scaling was made from small-scale specimen to full-scale stiffened panels and then their collapse behaviour is investigated. It is considered that the stiffened panel compressive ultimate strength test was designed according to geometrical scaling laws so that the output of the test could be used as representative of the stiffened panels of the compressive zone of a tanker hull subjected to vertical bending moment. The ultimate strength of a tanker hull is analysed by a FE analysis using the experimentally developed master stress-strain curves which are obtained by the beam tension test and the compressive test of the stiffened panel, and are then compared with the result achieved by the progressive collapse method.     

Ultimate strength assessment of a tanker hull based on experimentally developed master curves

A geometrically similar scaling was made from small-scale specimen to full-scale stiffened panels and then their collapse behaviour is investigated. It is considered that the stiffened panel compressive ultimate strength test was designed according to geometrical scaling laws so that the output of the test could be used as representative of the stiffened panels of the compressive zone of a tanker hull subjected to vertical bending moment. The ultimate strength of a tanker hull is analysed by a FE analysis using the experimentally developed master stress-strain curves which are obtained by the beam tension test and the compressive test of the stiffened panel, and are then compared with the result achieved by the progressive collapse method.     

基于CSR-H要求的加筋板屈曲评估方法研究

对CSR-H屈曲规范与现有规范在方法论上的差异进行分析,针对系列典型加筋板结构,对CSR-H规范、CSR-OT规范、CCS钢制海船入级规范中不同屈曲评估方法及EPM高级屈曲评估方法等进行数值比较研究。通过典型实船结构的屈曲强度评估和规范影响分析,分析CSR-H屈曲规范对于未来船体结构设计的影响。     

A computational investigation of the effects of localized corrosion on plates and stiffened panels

Structural components are prone to corrosion damage, especially when exposed to a sea environment. This article describes an investigation on the effects of local corrosion applied to plates and stiffened panels typically found in ship structures. Finite element investigations of initial buckling, ultimate collapse and post-ultimate responses are presented and described through the use of load-shortening collapse curves. Geometric imperfections and residual stresses were included in the model and results are compared to analytical calculations and available experimental measurements. This improved knowledge of the structural integrity of a damaged ship structure can be used to develop more efficient maintenance practices.     

腹板开孔的H型梁在压弯载荷下的失效行为和强度试验研究

腹板开孔的H型钢梁在船舶,航空器和海洋平台结构作为受弯构件被广泛运用。已有众多文献报道过关于腹板开孔梁遭受腹板卷曲破坏的情况,但腹板开孔加强遭受面板屈曲的情况未有详尽调查。因此文中开展6组试件的试验研究来调查腹板开孔的H型梁的失效行为和极限承载力,结果显示开孔影响了试件屈曲波的长度和数量。该研究结果可用于几何尺寸相似的实际结构。     

New simplified approach to collapse analysis of stiffened plates

A new simplified model for collapse analysis of stiffened plates is developed in the framework of the idealized structural unit method (ISUM). By idealizing material and geometrical nonlinearities, larger structural units are defined as an element in ISUM than in conventional finite element analysis (FEA). The proposed stiffened plate model consists of ISUM plate elements and beam-column elements. The formulation of the plate element is performed by introducing accurate shape functions to simulate the buckling/plastic collapse behaviour of plate panels. Combining plate and beam-column elements allows for both local buckling of the plate panel and overall buckling of the stiffener.Fundamental collapse modes of plate panels and stiffened plates are investigated by conventional FEA. According to the observed characteristics, the new simplified model is formulated. Comparisons with FEA demonstrate the accuracy of the simplified model and its high applicability to typical stiffened plates in marine structures.     

Experimental and numerical investigations of the ultimate torsional strength of an ultra large container ship

Structures of ultra large container ships (ULCS) are characterized by large deck openings and low torsional rigidity. It is essential to comprehensively figure out their collapse behaviors under pure torsion with both model experiments and numerical simulations, making an evaluation of their ultimate torsional strength. In this paper, a similar scale model of a 10,000TEU container ship has been designed and manufactured first, in which both geometric similarity and strength similarity are taken into account. Next the collapse behaviors of the test model are detailedly illustrated with both experimentally and numerically obtained results. Then discussions on warping or shear buckling deformations involved in the collapse process of the structure are conducted with extended numerical simulations. Finally, the ultimate torsional strength of the true ship is evaluated according to the similarity theory. Results show that it is the yielding and shear buckling of the side shells that causes the failure of the hull girder under pure torsion. Further nonlinear finite element analysis demonstrates that it may either have warping or shear buckling deformations in the torsional collapse process of the hull girder with a large deck opening, depending on the local rigidity distribution of side shells, which has a significant effect on the ultimate torsional strength of the hull girder.     

基于完整船体极限强度和搁浅剩余强度的协调共同结构规范对比分析

文章基于Smith法,根据国际船级社协会发布的2013版协调共同结构规范(HCSR)中破损模型、失效模式和载荷模型,考虑材料屈服、结构单元屈曲及后屈曲的特性,应用FORTRAN程序设计语言编写船体极限强度计算程序,以某76000吨散货船为算例,对完整船体的极限强度进行计算,对搁浅状态下破损船体的剩余强度进行计算并校核承载能力。通过在中拱和中垂工况下与其他规范的对比验证,2013版HCSR指定的剩余强度校核公式及船体梁载荷计算公式中选取的安全系数要求更高,校核更严格。     

Research on the dynamic buckling of a typical deck grillage structure subjected to in-plane impact Load

The dynamic buckling of the main deck grillage would result in the total collapse of the ship hull subjected to a far-filed underwater explosion. This dynamic buckling is mainly due to the dynamic moment of the ship hull when the ship hull experiences a sudden movement under impact load from the explosion. In order to investigate the ultimate strength of a typical deck grillage under quasi-static and dynamic in-plane compressive load, a structure model, in which the real constrained condition of the deck grillage was taken into consideration, was designed and manufactured. The quasi-static ultimate strength and damage mode of the deck grillage under in-plane compressive load was experimentally investigated. The Finite Element Method (FEM) was employed to predict the ultimate strength of the deck grillage subjected to quasi-static in-plane compressive load, and was validated by comparing the results from experimental tests and numerical simulations. In addition, the numerical simulations of dynamic buckling of the same model under in-plane impact load was performed, in which the influences of the load amplitude and the frequency of dynamic impact load, as well as the initial stress and deflection induced by wave load on the ultimate strength and failure mode were investigated. The results show that the dynamic buckling mode is quite different from the failure mode of the structure subjected to quasi-static in-plane compressive load. The displacements of deck edge in the vertical direction and the axial displacements are getting larger with the decrease of impact frequency. Besides, it is found that the dynamic buckling strength roughly linearly decreased with the increase of initial proportion of the static ultimate strength P₀. The conclusions drawn from the researches of this paper would help better designing of the ship structure under impact loads.