舰艏结构的碰撞损伤性能研究

船舶碰撞事故往往会引起被撞船的船体结构严重损坏,并且威胁船上人员的生命安全.在船一船碰撞中被撞船的损伤程度取决于两个方面:一是舷侧结构的碰撞性能;二是撞击船艏结构的相对刚度.船舶的艏部结构刚度一般远远高于舷侧结构的刚度,在船舶碰撞研究时,通常将撞头理想化为刚体,不考虑其损伤变形和能量吸收,这样做实际上过于保守.本文针对舰船,主要研究舰艏结构的碰撞损伤特性,将撞击舰艏作为可变形结构进行数值仿真研究,得到了一些艏部变形的规律.     

Analysis of ship–ship collision damage accounting for bow and side deformation interaction

This paper presents a procedure to analyse ship collisions using a simplified analytical method by taking into account the interaction between the deformation on the striking and the struck ships. Numerical simulations using the finite element software LS-DYNA are conducted to produce virtual experimental data for several ship collision scenarios. The numerical results are used to validate the method. The contributions to the total resistance from all structural components of the collided ships are analysed in the numerical simulation and the simplified method. Three types of collisions were identified based on the relative resistance of one ship to the other. They are denoted Collision Types 1 and 2, in which a relatively rigid ship collides with a deformable ship, and Collision Type 3, in which two deformable ships are involved. For Collision Types 1 and 2, estimates of the energy absorbed by the damaged ships differ by less than 8% compared to the numerical results. For Collision Type 3, the results differ by approximately 13%. The simplified method is applicable for right angle ship collision scenario, and it can be used as an alternative tool because it quickly generates acceptable results.     

Collision scenarios and probabilistic collision damage

This paper examines the influence of collision scenario random variables on the extent of predicted damage in ship collisions. Struck and striking ship speed, collision angle, striking ship type and striking ship displacement are treated as independent random variables. Other striking ship characteristics are treated as dependent variables derived from the independent variables based on relationships developed from worldwide ship data. A Simplified Collision Model (SIMCOL) is used to assess the sensitivity of probabilistic damage extent to these variables. SIMCOL applies the scenario variables directly in a time-stepping simultaneous solution of internal (structural) and external (ship) problems. During the simultaneous solution SIMCOL also calculates struck ship absorbed energy in the longitudinal and transverse directions. These results are compared to absorbed energy estimates based on uncoupled external dynamics only. The necessity and effectiveness of this approach is examined.     

Performance characterisation for risk assessment of striking ship impacts based on struck ship damaged volume

Ship collision accidents are rare events but pose huge threat to human lives, assets, and the environment. Many researchers have sought for effective models that compute ship stochastic response during collisions by considering the variability of ship collision scenario parameters. However, the existing models were limited by the capability of the collision computational models and did not completely capture collision scenario, and material and geometric uncertainties. In this paper, a novel framework to performance characterisation of ships in collision involving a variety of striking ships is developed, by characterising the structural consequences with efficient response models. A double-hull oil carrier is chosen as the struck ship to demonstrate the applicability of the proposed framework. Response surface techniques are employed to generate the most probable input design sets which are used to sample an automated finite element tool to compute the chosen structural consequences. The resulting predictor-response relationships are fitted with suitable surrogate models to probabilistically characterise the struck ship damage under collisions. As demonstrated in this paper, such models are extremely useful to reduce the computational complexity in obtaining probabilistic design measures for ship structures. The proposed probabilistic approach is also combined with available collision frequency models from literature to demonstrate the risk tolerance computations.     

船舶碰撞缓冲型球鼻艏概念探讨--球鼻曲率对碰撞的影响

船舶碰撞事故中，被撞油船船侧的破裂会引起严重的海洋污染，故油船双层船壳设计成为防止被撞油船破损的有效措施。但随着海上运输船舶的数目及尺度的日益增大，双层船壳已不能满足防止船侧破损的要求。本文提出了缓冲型球算般的构思。在船舶相撞的过程中，球鼻艏曲率的尖锐程度影响被撞船船侧的损伤程度，故提出并讨论了表征球鼻艏碰撞特性的标志性参数。通过对不同曲率的球鼻艏一系列的碴撞数值仿真计算，详细描述了外形曲率对球鼻艏的变形形态、碰撞力、碰撞力密度及能量吸收的影响，指出船舶采用钝形的球鼻艏能有效减小碰撞时的穿透损伤。     

Analytical modelling of ship collision based on full-scale experiments

This paper presents a theoretical model allowing us to predict the consequences of ship–ship collision where large forces arise due to the sloshing in ship ballast tanks. The model considers the inertia forces of the moving bodies, the effects of the surrounding water, the elastic bending of the hull girder of the struck ship, the elasticity of the deformed ship structures and the sloshing effects in partially filled ballast tanks. The study focuses on external dynamics. Internal mechanics, presenting the collision force as a function of penetration, was obtained from experiments. The model was validated with two full-scale collision experiments, one with a significant sloshing effect and the other without it. The comparison of the calculations and the measurements revealed that the model predictions were in good agreement, as the errors at the maximum value of penetration were less than 10%.     

高强度钢缓冲型船艏研究

在船舶碰撞事故中，一般船侧的破损程度比船艏大，从环境保护的全局意识及降低整体经济损失的角度出发，应该在保证船艏结构在能够承受常规载荷的前提下适当地减小其纵向刚度，使其在撞击船侧时导致船侧破损的可能性降低。笔者从损伤形态，碰撞力，碰撞力密度和能量吸收等方面对采用高强度钢的缓冲船艏进行研究，发现船艏结构采用高强度钢在等强度的条件下，可减少结构的板厚和船艏结构的临界压溃载荷，从而降低对被撞船舶侧结构的破坏。     

Design of bridges against ship collisions

The paper outlines a rational design procedure for bridge piers and pylons against ship collision impacts. Firstly, a set of risk acceptance criteria are proposed. This is followed by a mathematically based procedure for calculation of the probability of critical ship meeting situations near the bridge, and the probability of ship collision accidents caused by human errors as well as technical errors. This first part of the paper leads to identification of the largest striking ship, “design vessels”, a given bridge pier must withstand without structural failure in order for the bridge connection to fulfil the risk acceptance criteria. The final part of the paper is devoted to an analysis of the needed impact capacity for the bridge pylons and piers exposed to ship bow impact loads from these “design vessels”. For a number of different ship types and different tonnage merchant vessels, load – displacement relations for ship bow collisions against rigid walls are derived. Based on these comprehensive numerical results, a new empirical relation is derived which is suited for design against bow collisions. This expression for maximum bow collision forces is compared with a previously published expression for ice-strengthened ships and with existing standards for assessment of bow crushing forces. It is shown that there is need for an update of these existing standards. For design of piers and pylons against local impact pressure loads, a pressure - area relation for bulbous bow impacts is derived.     

A new formulation of the impact mechanics of ship collisions and its application to a ship–iceberg collision

A new formulation is proposed for the analysis of the impact mechanics of ship collisions that can be applied to both 2D and 3D cases. It is assumed that the impact force is large, and all other forces except the impact forces are neglected. The equations of motion are solved in a local coordinate system, and a transformation matrix between the global and the local coordinate system is proposed. The mass and inertia properties are formulated in the local coordinate system. The orientation of the local coordinate system is determined by the hull shape of the struck ship at the contact point. A closed form solution of the external mechanics of ship collisions is derived. Excellent agreement with an alternative 2D formulation for ship–ship collisions is achieved. The features of the proposed 3D method are demonstrated by numerical examples. An application of the method to estimate the required energy dissipation in ship–iceberg collisions is included. Results and discussions are presented and finally, conclusions are made.     

On Impact mechanics in ship collisions

The purpose of this paper is to present analytical, closed-form expressions for the energy released for crushing and the impact impulse during ship collisions. Ship–ship collisions, ship collisions with rigid walls and ship collisions with flexible offshore structures are considered. The derived mathematical models include friction at the contact point so that situation where the collision results in a sliding motion is included. Results obtained by application of the present procedure are compared with results obtained by time simulations and good agreement has been achieved. In addition, a number of illustrative examples are presented. The procedure presented in the paper is well suited for inclusion in a probabilistic calculation model for damage of ship structures due to collisions.     

被撞船刚体运动响应的滞后特性

船舶碰撞过程中，被撞船的刚体运动较之碰撞区的局部损伤变形存在一定程度的滞后。本文以理论分析和数值仿真两种方法对该滞后现象进行了研究。提出了运动滞后分析的基本假定和计算公式。研究结果表明，被撞船的运动滞后与撞击速度有重要关系，在高速撞击时，船舶碰撞的内、外部机理计算可相对独立地进行而不会引起明显的分析误差。     

Free and forced vibration analyses of ship structures using the finite element method

With increases in ship size and speed, shipboard vibration becomes a significant concern in the design and construction of vessels. Excessive ship vibration is to be avoided for passenger comfort and crew habitability. In addition to the undesired effects on humans, excessive ship vibration may result in the fatigue failure of local structural members or malfunctioning of machinery and equipment. The propeller induces fluctuating pressure on the surface of the hull, which induces vibration in the hull structure. These pressure pulses acting on the ship hull surface above the propeller are the predominant factor for vibrations of ship structures are taken as excitation forces for forced vibration analysis. Ship structures are complex and may be analyzed after idealization of the structure. Several simplifying assumptions are made in the finite element idealization of the hull structure. In this study, a three-dimensional finite element model representing the entire ship hull, including the deckhouse and machinery propulsion system, has been developed using solid modeling software for local and global vibration analyses. Vibration analyses have been conducted under two conditions: free–free (dry) and in-water (wet). The wet analysis has been implemented using acoustic elements. The total damping associated with overall ship hull structure vibration has been considered as a combination of the several damping components. As a result of the global ship free vibration analysis, global natural frequencies and mode shapes have been determined. Moreover, the responses of local ship structures have been determined as a result of the propeller-induced forced vibration analysis.     

船艏横向加强框架对船艏耐撞性能的影响

在撞击过程中船艏结构的典型损伤是外壳板和内加筋的褶皱，撕裂和弯曲。在以前的船舶结构的碰撞分析的简化方法或数值模拟中往往略去横向肋骨框架对船艏碰撞性能的影响。本文利用有限元数值仿真方法研究了横向肋骨框架在碰撞损坏过程中的作用，发现其对船艏结构的损伤形态、碰撞力及能量耗散有重要影响。因而是碰撞计算中不可忽略的因素。     

基于舰船受损体积的舰船撞击风险评估的性能特征（英文）

Ship collision accidents are rare events but pose huge threat to human lives, assets, and the environment. Many researchers have sought for effective models that compute ship stochastic response during collisions by considering the variability of ship collision scenario parameters. However, the existing models were limited by the capability of the collision computational models and did not completely capture collision scenario, and material and geometric uncertainties. In this paper, a novel framework to performance characterisation of ships in collision involving a variety of striking ships is developed, by characterising the structural consequences with efficient response models. A double-hull oil carrier is chosen as the struck ship to demonstrate the applicability of the proposed framework. Response surface techniques are employed to generate the most probable input design sets which are used to sample an automated finite element tool to compute the chosen structural consequences. The resulting predictor-response relationships are fitted with suitable surrogate models to probabilistically characterise the struck ship damage under collisions. As demonstrated in this paper, such models are extremely useful to reduce the computational complexity in obtaining probabilistic design measures for ship structures. The proposed probabilistic approach is also combined with available collision frequency models from literature to demonstrate the risk tolerance computations.     

单壳船侧结构的碰撞能量吸收

文章提出一种近似的解析方法评估单壳船侧结构的耐撞性。首先研究了单轴对称工字梁在横向载荷作用下结构从形成塑性铰到弦响应的力学过程,导出能量和变形的近似解析关系,然后考虑球鼻首和船侧结构的碰撞性将主要受撞区域舷侧板梁组合结构离散成为多个单轴对称工字梁,得到单壳舷侧结构碰撞过程能量吸收的近似公式,同时研究了球鼻形状以及不同碰撞位置对结构变形与能量吸收的影响。对散货船单壳舷侧结构的耐撞性用本文近似理论公式     

A simplified analytical method for estimating the crushing resistance of an inclined ship side

This paper provides a new contribution to the simplified analytical treatment of collisions between two ships. It is directly connected to the well-known super-elements method, which is a simplified procedure allowing for a quick estimation of the damages caused to both the striking and struck vessels during such events. In this article, a new analytical formulation is presented for estimating the impact resistance provided by inclined ship side panels. Two different scenarios are treated. We first deal with the case of an impact between the oblique plate and the stem of the striking ship, and then we consider the situation where the inclined panel is impacted by the bulb. For these two scenarios, an analytical formulation relating the force and the penetration is provided and these developments are validated by comparing them to the results of finite elements simulations. Finally, the new inclined plate super-element is integrated in a simplified model of a frigate collided by another ship, and the resistance given by the super-elements method is then compared to the one obtained by a numerical simulation of this collision.     

An analytical method for predicting the ship side structure response in raked bow collisions

As an increasing number of ships continue to sail in heavy traffic lanes, the possibility of collision between ships has become progressively higher. Therefore, it is of great importance to rapidly and accurately analyse the response and consequences of a ship's side structure subjected to large impact loads, such as collisions from supply vessels or merchant vessels. As the raked bow is a common design that has a high possibility of impacting a ship side structure, this study proposes an analytical method based on plastic mechanism equations for the rapid prediction of the response of a ship's side structure subjected to raked bow collisions. The new method includes deformation mechanisms of the side shell plating and the stiffeners attached. The deformation mechanisms of deck plating, longitudinal girders and transverse frames are also analysed. The resistance and energy dissipation of the side structure are obtained from individual components and then integrated to assess the complete crashworthiness of the side structure of the struck ship. The analytical prediction method is verified by numerical simulation. Three typical collision scenarios are defined in the numerical simulation using the code LS_DYNA, and the results obtained by the proposed analytical method and those of the numerical simulation are compared. The results correspond well, suggesting that the proposed analytical method can improve ship crashworthiness during the design phase.     

Numerical and experimental motion simulations of nonsymmetric ship collisions

A calculation model to simulate nonsymmetric ship collisions, implying an arbitrary impact location and collision angle, is described in the paper. The model that is introduced is based on the time integration of twelve equations of motion, six for each ship. The motions of the ships are linked together by a mutual contact force. The contact force is evaluated as an integral over the surface tractions at the contact interface. The calculation model provides full time histories of the ship motions and the acting forces. Physical understanding of the underlying phenomena was obtained by a series of model-scale experiments in which a striking ship collided with an initially motionless struck ship. In this paper, numerical simulations of four nonsymmetric collisions are presented and the calculations are validated with the results of the experiments.     

A simplified analytical method to estimate the resistance of plane lock gates impacted by river barges

This paper presents a simplified analytical method to evaluate the resistance of a single plating lock gate impacted by a river barge. The approach is based on the assumption that the gate behavior may be divided into two successive phases. At the beginning of the collision, local crushing of some structural elements occurs concomitantly with small overall elastic motion of the entire gate. Then, when the penetration of the barge into the gate becomes important, a global plastic mechanism develops over the entire structure. In addition to the membrane and bending deformations occurring classically in such collisions, the particular flat shape of the striking barge bow leads to shear deformations near the gate edges. For all these deformation modes, closed-form expressions of the gate resistance are derived for both local and global deformation phases by applying the upper-bound method. These analytical developments are then validated through comparisons with numerical solutions obtained from non-linear finite-element simulations.     

LNG船舷侧碰撞损伤场景下的极限强度研究

液化天然气(LNG)船的船体极限强度是衡量其安全性及环境适应性的重要指标。LNG船在受到撞击损伤后的安全性,不仅取决于船体结构的剩余极限强度,还取决于其围护系统中的绝缘箱能否在船体损伤状态下承受结构变形所引起的应力载荷。利用有限元数值仿真技术和ABAQUS软件,建立LNG船液舱围护系统以及舱段的有限元模型,模拟LNG船舷侧受撞击场景。在碰撞损伤基础上,对含有液舱围护系统的LNG船舱段开展极限强度研究,获取LNG船舱段结构的极限承载能力。研究发现在船体达到极限强度状态之前,液舱围护系统不会失效。