带吊舱水下机器人运动建模与仿真(英文)

To provide a simulation system platform for designing and debugging a small autonomous underwater vehicle’s (AUV) motion controller, a six-degree of freedom (6-DOF) dynamic model for AUV controlled by thruster and fins with appendages is examined. Based on the dynamic model, a simulation system for the AUV’s motion is established. The different kinds of typical motions are simulated to analyze the motion performance and the maneuverability of the AUV. In order to evaluate the influences of appendages on the motion performance of the AUV, simulations of the AUV with and without appendages are performed and compared. The results demonstrate the AUV has good maneuverability with and without appendages.     

半潜平台动力定位系统模型预测控制器设计(英文)

This paper researches how to apply the advanced control technology of model predictive control(MPC) to the design of the dynamic positioning system(DPS) of a semi-submersible platform.First,a linear low-frequency motion model with three degrees of freedom was established in the context of a semi-submersible platform.Second,a model predictive controller was designed based on a model which took the constraints of the system into account.Third,simulation was carried out to demonstrate the feasibility of the controller.The results show that the model predictive controller has good performance and good at dealing with the constraints of the system.     

Simulating an underwater vehicle self-correcting guidance system with Simulink

Underwater vehicles have already adopted self-correcting directional guidance algorithms based on multi-beam self-guidance systems, not waiting for research to determine the most effective algorithms. The main challenges facing research on these guidance systems have been effective modeling of the guidance algorithm and a means to analyze the simulation results. A simulation structure based on Simulink that dealt with both issues was proposed. Initially, a mathematical model of relative motion between the vehicle and the target was developed, which was then encapsulated as a subsystem. Next, steps for constructing a model of the self-correcting guidance algorithm based on the Stateflow module were examined in detail. Finally, a 3-D model of the vehicle and target was created in VRML, and by processing mathematical results, the model was shown moving in a visual environment. This process gives more intuitive results for analyzing the simulation. The results showed that the simulation structure performs well. The simulation program heavily used modularization and encapsulation, so has broad applicability to simulations of other dynamic systems.     

Simulating an underwater vehicle self-correcting guidance system with Simulink

Underwater vehicles have already adopted self-correcting directional guidance algorithms based on multi-beam self-guidance systems,not waiting for research to determine the most effective algorithms.The main challenges facing research on these guidance systems have been effective modeling of the guidance algorithm and a means to analyze the simulation results.A simulation structure based on Simulink that dealt with both issues was proposed.Initially,a mathematical model of relative motion between the vehicle and the target was developed,which was then encapsulated as a subsystem.Next, steps for constructing a model of the self-correcting guidance algorithm based on the Stateflow module were examined in detail.Finally,a 3-D model of the vehicle and target was created in VRML,and by processing mathematical results,the model was shown moving in a visual environment.This process gives more intuitive results for analyzing the simulation.The results showed that the simulation structure performs well.The simulation program heavily used modularization and encapsulation,so has broad applicability to simulations of other dynamic systems.     

基于灰色系统理论的滑行艇运动姿态预报(英文)

In order to minimize the harm caused by the instability of a planing craft, a motion prediction model is essential. This paper analyzed the feasibility of using an MGM(1,N) model in grey system theory to predict planing craft motion and carried out the numerical simulation experiment. According to the characteristics of planing craft motion, a recurrence formula was proposed of the parameter matrix of an MGM(1,N) model. Using this formula, data can be updated in real-time without increasing computational complexity significantly. The results of numerical simulation show that using an MGM(1,N) model to predict planing motion is feasible and useful for prediction. So the method proposed in this study can reflect the planing craft motion mechanism successfully, and has rational and effective functions of forecasting and analyzing trends.     

海洋观测平台在波浪中运动响应的数值模拟(英文)

Offshore observation platforms are required to have great ability to resist waves when they are operating at sea. Investigation on the motion characteristics of the platforms in the sea can provide significant reference values during the platform design procedure. In this paper, a series of numerical simulation on the interaction of a triple-hulled offshore observation platform with different incident waves is carried out. All of the simulations are implemented utilizing our own solver naoe-FOAM-SJTU, which is based and developed on the open source tools of OpenFOAM. Duration curves of motion characteristics and loads acting on the platform are obtained, and a comparison between the results of the amplitude in different incident waves is presented. The results show that the solver is competent in the simulation of motion response of platforms in waves.     

Research on a multi-grid model for passenger evacuation in ships

In order to enhance the authenticity and accuracy of passenger evacuation simulation in ships, a new multi-grid model was proposed on the basis of a traditional cellular automata model. In the new model finer lattices were used, interaction of force among pedestrians or between pedestrians and constructions was considered, and static floor fields in a multi-level exit environment were simplified into cabin and exit static floor fields. Compared with the traditional cellular automata model, the multi-grid model enhanced the continuity of the passengers’track and the precision of the boundary qualifications. The functions of the dislocation distribution of passengers as well as partial overlap of tracks due to congestion were realized. Furthermore, taking the typical cabin environment as an example, the two models were used to analyze passenger evacuation under the same conditions. It was found that the laws of passenger evacuation simulated by the two models are similar, while the simulation’s authenticity and accuracy are enhanced by the multi-grid model.     

On prediction of longitudinal attitude of planing craft based on controllable hydrofoils

The purpose of this research study was to examine the attitude response of a planing craft under the controllable hydrofoils.Firstly,a non-linear longitudinal attitude model was established.In the mathematical model,effects of wind loads were considered.Both the wetted length and windward area varied in different navigation conditions.Secondly,control strategies for hydrofoils were specified.Using the above strategies,the heave and trim of the planing craft was adjusted by controllable hydrofoils.Finally,a simulation program was developed to predict the longitudinal attitudes of the planing craft with wind loads.A series of simulations were performed and effects of control strategies on longitudinal attitudes were analyzed.The results show that under effects of wind loads,heave of fixed hydrofoils planing craft decreased by 6.3%,and pitch increased by 8.6% when the main engine power was constant.Heave decreased by less than 1% and trim angle decreased by 1.7% as a result of using variable attack angle hydrofoils;however,amplitude changes of heave and pitch were less than 1% under the control of changeable attack angle hydrofoils and longitudinal attitude.     

Mathematical model of small water-plane area twin-hull and application in marine simulator

Small water-plane area twin-hull（SWATH） has drawn the attention of many researchers due to its good sea-keeping ability.In this paper,MMG＇s idea of separation was used to perform SWATH movement modeling and simulation;respectively the forces and moment of SWATH were divided into bare hull,propeller,rudder at the fluid hydrodynamics,etc.Wake coefficient at the propellers which reduces thrust coefficient,and rudder mutual interference forces among the hull and propeller,for the calculation of SWATH,were all considered.The fourth-order Runge-Kutta method of integration was used by solving differential equations,in order to get SWATH＇s movement states.As an example,a turning test at full speed and full starboard rudder of ‘Seagull＇ craft is shown.The simulation results show the SWATH＇s regular pattern and trend of motion.It verifies the correctness of the mathematical model of the turning movement.The SWATH＇s mathematical model is applied to marine simulator in order to train the pilots or seamen,or safety assessment for ocean engineering project.Lastly,the full mission navigation simulating system（FMNSS） was determined to be a successful virtual reality technology application sample in the field of navigation simulation.     

液舱晃荡与浮体非线性耦合运动分析(英文)

Nonlinear interactions among incident wave, tank-sloshing and floating body coupling motion are investigated. The fully nonlinear sloshing and body-surface nonlinear free surface hydrodynamics is simulated using a Non-Uniform Rational B-Spline (NURBS) higher-order panel method in time domain based on the potential theory. A robust and stable improved iterative procedure (Yan and Ma, 2007) for floating bodies is used for calculating the time derivative of velocity potential and floating body motion. An energy dissipation condition based on linear theory adopted by Huang (2011) is developed to consider flow viscosity effects of sloshing flow in nonlinear model. A two-dimensional tank model test was performed to identify its validity. The present nonlinear coupling sway motion results are subsequently compared with the corresponding Rognebakke and Faltinsen (2003)’s experimental results, showing fair agreement. Thus, the numerical approach presented in this paper is expected to be very efficient and realistic in evaluating the coupling effects of nonlinear sloshing and body motion.     

系泊系统的时域仿真及其非线性动力学特性分析

应用时域仿真的方法研究了系泊系统的非线性动力学特性。以三阶操纵运动方程为基础,引入定常的风力、潮流作用力和二阶波浪力,建立了系泊系统三自由度的运动微分方程。在此数学模型的基础上,建立了系泊系统的多自由度的计算机仿真模型。在风浪流联合作用的情形下,对一艘单点系泊油轮的动力学行为进行了仿真研究。以潮流速度和系缆程度为分岔控制参数,在参数平面上给出了局部分岔集。研究表明,系泊系统的动力学行为具有强烈的非线性特征。在仿真过程中观察到了吸引子的共存和Hopf分岔。局部分岔集将参数平面分为3个系统动力学行为本质不同的区域。极值系泊力水平与系泊系统的动力学行为有着密切的关系。对于单点系泊船舶而言,顶风顶浪顶流的状态并不一定是最为危险的工况。局部分岔集的确定为系泊系统参数的选择提供了决策依据。     

船舶拖航系统六自由度操纵运动仿真

研究拖航作业操纵运动对于提高拖航作业的安全性有重要意义,采用MMG分离式船舶运动数学模型,结合拖缆的悬链线张力计算模型,建立由拖轮、拖缆、被拖轮组成的拖航系统六自由度操纵运动模型,编制仿真程序,通过数值计算,对该系统操纵运动进行仿真模拟。以拖轮和导管架驳船的拖航运动为例,分析拖缆长度、拖航速度对拖航系统操纵运动及拖航航向稳定性的影响,模拟该系统在风、浪、流影响下的操纵运动,运动数据实时解算,为在视景模拟平台上进行作业预演,规避拖航作业风险提供理论指导。     

基于参数扰动模型的遥控潜水器滑模控制方法

[目的]遥控潜水器(ROV)的运动控制易受到环境和模型参数不确定性因素的影响,难以达到预期控制效果,针对此情况,提出一种基于参数扰动模型的ROV滑模控制方法。[方法]以标准ROV模型为基础,将环境干扰与模型自身参数的不确定性作为模型扰动参数,建立带参数扰动的ROV模型,并对模型进行解耦得到深度方向的控制模型,基于带参数扰动的模型完成定深运动滑模控制器设计,开展仿真试验验证。[结果]结果表明,基于参数扰动ROV模型的滑模控制器能够对ROV进行稳定、高效的定深控制,并且该控制方法可以改善外干扰和模型参数不确定性带来的影响。[结论]该控制器设计方法可为解决ROV控制过程中受到的环境与模型不确定性问题提供一种解决方案。     

微型开架式水下机器人水动力系数测定

水下机器人水动力系数的准确测定,是对机器人运动进行仿真和控制的前提。以形状复杂的开架式有缆水下机器人(ROV)作为研究对象,通过一系列水动力试验,计算出适用于开架式水下机器人模型的几个重要的实时水动力系数,为自主遥控水下机器人(ARV)的运动仿真提供了数据支撑,进而为ARV的控制奠定了基础。     

Validation of 6-DOF motion simulations for ship turning in regular waves

In this study, a six degrees of freedom (6-DOF) motion simulation method of a ship steering in regular waves is validated. The proposed simulation model is based on the two-time scale concept where the 6-DOF motions are expressed as the sum of the low-frequency maneuvering motions and high-frequency wave-induced motions. Turning simulations of a KCS container ship model with a rudder angle of \(\pm 35^\circ\) in calm water and regular waves are performed and the obtained results are compared with the results of a free-running model test. The model tests were conducted using a ship model of length 3.057 m in a square tank at the National Research Institute of Fisheries Engineering, Japan. The wave conditions were as follows: the wave height was 3.6 m at full-scale, ratio of wavelength to ship length was 1.0, and the ship approached in the head wave direction before it was steered. The present method can simulate both the turning motion and wave-induced motions in regular waves with practical accuracy.

     

船舶靠绑作业系统试验模拟与测试技术

风浪作用下船舶系泊靠绑进行补给、救生与货物转运等作业是一个非常复杂的过程,在波浪水池中进行模型试验,了解靠绑作业系统的运动和受力特性,必须考虑每一个细节.本文针对系泊靠绑模型试验,重点介绍了缆绳、碰垫非线性弹性特性和系泊缆绳上补偿力模拟与测试方法,以及靠绑船舶的运动响应测试,并给出了部分模型试验结果.从模拟的缆绳和碰垫弹性曲线及系泊缆绳上补偿力试验结果来看,文中所用的缆绳、碰垫和缆绳上补偿力模拟方法是成功的,非接触式光学运动测量系统能方便地进行靠绑船舶运动响应测试,可以应用于今后其他类似模型试验中去.     

开架式ROV动力匹配稳态与动态设计方法

本文针对开架式ROV的设计,提出一种将稳态匹配与动态匹配相结合的动力匹配研究方法。首先根据所设计的ROV,运用Fluent软件对其进行水阻力仿真,得出ROV在不同航速下的阻力,其次对螺旋桨进行特性分析,进而对比螺旋桨不同参数对推力和阻力匹配的影响,同时考虑螺旋桨功率与电机功率匹配,完成ROV的稳态匹配。最后加入动态分析得到最终的动力匹配,并证明其具有较好的运动稳定性以及机动性。     

半潜船海上装载故障船运动响应研究

论文针对半潜船海上救援装载故障船的设计方案开展研究,建立仿真分析模型,应用数值模拟软件AQWA开展时域的数值计算,得到特定海况条件下的两船6个自由度运动响应。针对运动响应结果进行统计分析,得出两船的运动特性规律,研究结果对半潜船海上装载故障船的实际方案的制定与优化具有指导意义和参考价值。     

无模型自适应控制算法在ROV定深控制中的仿真

将无模型自适应控制方法应用于ROV(Remote Operated Vehicle)定深控制当中。该控制方案的设计仅利用ROV的垂向推力输入数据和深度输出数据，用动态线性化时变模型替代ROV非线性系统模型，算法中不包含ROV模型及水动力参数信息。因此，解决了ROV因系统复杂，水动力参数难以确定所导致的控制器设计复杂度高，控制效果不理想的问题。为了便于仿真，本文建立含有补偿参数的ROV简化模型，模型仅用于产生系统的I/O数据，不参与控制器的设计。仿真结果表明，在ROV定深控制当中，无模型自适应控制(Model-free adaptive control，MFAC)比PID控制具有更强的抗扰能力。此外，在欠阻尼ROV系统中，基于偏格式动态线性化的无模型自适应控制(partial form dynamic linearization based Model-free adaptive control，PFDL-MFAC)方案相比于基于紧格式动态线性化的无模型自适应控制(compact form dynamic linearization based Model-free adaptive control，CFDL-MFAC)方案具有更好的控制效果。