Study of algorithms of new slender ship theory of wave resistance

In this paper, Noblesse‘s New Slender-Ship Wave-Making Theory was investigated numerically. Detailed expressions of zeroth and 1st order wave resistance have been derived and calculation programs have also been compiled. In the single and double integral terms of Green function, the kernel function of wave resistance expression, special function expansion method and Chebyshev polynomials approach have been adopted respectively, which greatly simplify the calculation and increase the convergence speed.     

Introduction of the Australian Chamber of Shipping

HISTORY The Australian Chamber of Shipping Ltd (the 'Chamber') was established in 1964 and remains actively involved domestically and internationally in the sea freight and passenger transport industry. It has extensive relationships with various bodies, both worldwide and nationally.     

Prediction of Stabilization of Ship in Random Wave

In this paper we show thc method of energy in part with which we can get the model of random wave,and predict theroll motion of unstabilized ship and stabilized ship using the wave model.The control parameters of fin stabilizer are determinedaccording to the performance index. The simulation of the system is also made in this paper. The comparison of the simulationwith real ship indicates that the method can be used in the prediction of roll motion of a stabilized ship in random wave.     

Analysis of Flux of Gas Passing Circle Lacuna

The rate of flow of the gas flowing through cirque chink often needs calculation in engineering. The characters of compressibility and thermodynamics have some effect on the gas flowing, so the analysis on the flow of gas is more complex than that of liquid. But under different conditions and different I'equirements of precision the analysis can be simplified suitably, then make the formulae given become simple subsequently. This paper analyzes various gas flux based on basic characters and motion laws of gas and the analysis is just applied in an engineering project.     

Fatigue analysis of the bow structure of FPSO

The bow structure of FPSO moored by the single mooting system is rather complicated. There are many potential hot spots in connection parts of structures between the mooting support frame and the forecastle. Mooting forces, which are induced by wave excitation and transferred by the YOKE and the mooting support frame, may cause fatigue damage to the bow structure. Different from direct wave-induced-forces, the mooting force consists of wave frequency force (WF) and 2nd draft low frequency force (LF) , which are represented by two sets of short-term distribution respectively. Based on two sets of short-term distribution of mooting forces obtained by the model test, the fatigue damage of the bow structure of FPSO is analyzed, with emphasis on two points. One is the procedure and position selection for fatigue check, and the other is the application of new formulae for the calculation of accumulative fatigue damage caused by two sets of short-term distribution of hot spot stress range. From the results distinguished features of fatigue damage to the FPSOs bow structure can be observed.     

Simulation study of plane motion of air cushion vehicle

This research is on horizontal plane motion equations of Air Cushion Vehicle (ACV) and its simulation. To investigate this, a lot of simulation study including ACV‘s voyage and turning performance has been done. It was found that the voyage simulation results were accorded with ACV own characteristic and turning simulation results were accorded with USA ACV‘s movement characteristic basically.     

Study of automatic designing of line heating technique parameters

1Introduction Lineheatingisashellplateheatprocessingmethod usedinshipbuildingproduction.Itisacomplexand difficulttechnique,mainlyusedindoublebending shellplateforming.Becausetherearemanyinfluence factorsinplateforming,theinfluencedisciplineis hardtopredic…     

Analysis of development status quo of Chinese logistics market

China now has more than 100,000 logistics enterprises, and their market volume is expected to reach 240 billion yuan (US$29 billion) this year. The volume is expected to exceed 1,000 billion yuan (US$120 billion) by 2010.     

Globalization and development of freight forwarder—— An interview of President Aldo Da Ros of International Federation of Freight Forwarders Associations

At the seminar sponsored by the China Interna tional Freight Forwarders Association(CIFA) in Beijing on November 13-15, 2002, two journalists from the publication China Ocean Shipping Monthly interviewed Mr. Aldo Da Ros, President of the International Federation of Freight Forwarders Associations(FIATA). The following is the interview report.     

Numerical simulation of the anti-shock performance of a gear case

Both sea battles and testing of ship in underwater explosions reveal unacceptably poor anti-shock performance of important shipboard equipment. Anti-shock performance of shipboard equipment is a significant factor determining fighting strength and survivability. The anti-shock performance of a shipboard gear case based on BV043/85 was investigated using numerical simulation. A geometric model of the gear case was built using MDT software and meshed in HyperMesh software, and then the finite element model of the gear case was formed. Using ABAQUS software, the anti-shock performance of the gear case was simulated. First, shock response of typical regions of gear case was determined. Next, some generalizations were made about the anti-shock performance of the gear case by analyzing the Mises stress of typical regions varied with shock inputs. Third, weak regions were determined from simulation results. The threshold values of shock resistance of the gear case at different impulse widths were obtained through interpolating the numerical simulation results selected from the most dangerous spot. This research provides a basis for further optimization of the design of gear cases.     

Two-dimensional FEM model of Vortex-Induced Vibration of A Circular Cylinder

The finite element method was employed to solve the N-S equation.Incorporated with the vibration equa- tion,the vortex-induced vibration of the circular cylinder is studied by an Arbitrary-Lagrangian-Eulerian(ALE)al- gorithm.The Reynolds number based on the cylinder diameter and the undisturbed flow velocity ranges from 90 to 150. The motion of the cylinder was modeled by a spring-damper-mass system.The numerical model has been validated by comparison with the experimental data in literature.The"lock-in"and"beating"phenomena were successfully repro- duced in the numerical test.     

Build the First Largest Bridge of China and Create a Constructionof Fine Quality of the Century——A brief account of theconstruction of the infrastructure of the main bridge of Jiangyin Yangtze River Highway Bridgc

国家主席江泽民题写桥名并出席通车仪式的“江阴大桥”是主跨为1 385m，一跨过长江，中国第一、世界第四的钢悬索特大公路桥。本文综述了中港二航局在承建大桥下部结构(A标、B标)的施工中，根据工程规模大、合同期短、技术含量高、地质条件复杂、施工难度大等特点，运用系统工程原理，健全质量保证体系，坚持技术领先，优化要素配置，精心雕塑中国第一大桥，取得单位工程质量评比全优的佳绩。     

Hard Foulers Induced Crevice Corrosion of HSLA Steel in theCoastal Waters of the Gulf of Mannar （Bay of Bengal）, India

In the present study an attempt has been made toinvestigate the relationship between the variations in the foulingassemblage and corrosion behaviour of HSLA steel at three coastallocations in the Gulf of Marmar, India, over a period of 24 months.Oyster fouling was dominant in the Tuticorin open sea, whilebarnacles were the major foulants in the Tuticorin harbour andMandapam. The fouling load in the Tuticorin waters was higherwhen compared to the Mandapam waters. The corrosion ratesdecreased progressively with the immersion time at all three testlocations. In the Tuticorin open sea, the corrosion rates were higherwhen compared to the other two locations throughout the studyperiod. The surface of the coupons was characterized by crevicesbeneath the hard foulers in the Tuticorin harbour and Mandapam,whereas in the Tuticorin open sea, the coupons experiencedcrevices of a tunneling nature. The percentage of the loss of thetensile strength increased with time at all the test locations.     

Study of station and attitude maneuver of submergence rescue vehicle

It is an important control process to operate motion of an submergence rescue vehicle(SRV). Seeing that the motion of the submergence rescue vehicle is special, it is necessary to employ non-linear predictive control system. For this reason, continuous dynamic performance of the system, the logical components and the operative restraints are expressed as the non-linear equations of state with the inequality restraints, and the model principle of hybrid system is introduced. The conclusion shows that it comes true to exactly control position and attitude of the SRV by means of non-linear model predictive control. The test in a model basin has also proved that the above methods are efficient.     

Evaluating the maneuverability of a new type of self-propelled barge

A new type of self-propelled barge was designed specifically for use on the Chishui River. This paper presents experimental results of its performance from tests in water of different depths,while bearing different loads. For test purposes,one of the best self-propelled barges from the Chishui River was used as a performance reference. The comparison showed that the new design has better maneuvering performance.     

Strategies of state and local government in management of urban transport problems – A case of Delhi

In India, different layers of Government control different policy instruments to tackle transport externalities which might result in coordination problems and possible efficiency losses. This paper, therefore, addresses the coordination problem resulting from the division of policy instruments between two different government levels that face different types of externalities in varying degrees of magnitude in the urban transport sector by developing three types of theoretical models: the Full Control Centralised Model where the state government has full control over all pricing instrument; a Nash equilibrium model where each of the government levels controls only one instrument and takes the behaviour of the other as given; and a Stackelberg equilibrium mode where the behaviour of the state government is influenced by the fact that one of the price instruments is controlled by the local government. With an empirical illustration of the model for Delhi, the paper finds that since there are many interactions and many externalities between the two levels of government, a division of roles between them does not guarantee an efficient pricing outcome and the efficiency of pricing would depend on the institutional set up and on the correspondence between the objective functions of the two government levels.     

Influence on the hydrodynamic performance of a variable vector propeller of different rules of pitch angle change

To design a more effective blade pitch adjustment mechanism,research was done on changes to the hydrodynamic characteristics of VVPs(Variable Vector Propeller) caused by different rules for changing pitch angle. A mathematical method for predicting the hydrodynamic characteristics of a VVP under unsteady conditions is presented based on the panel method. Mathematical models for evaluation based on potential flow theory and the Green theorem are also presented. The hydrodynamic characteristics are numerically predicted. To avoid gaps between panels,hyperboloidal quadrilateral panels were used. The pressure Kutta condition on the trailing edge of the VVP blade was satisfied by the Newton-Raphson iterative procedure. The influence coefficients of the panels were calculated by Morino's analytical formulations to improve numerical calculation speed,and the method developed by Yanagizawa was used to eliminate the point singularity on derivation calculus while determining the velocities on propeller surfaces. The calculation results show that it's best for the hydrodynamic characteristics of the VVP that pitch angle changes follow the sine rule.     

Analysis of ultimate uniaxial compressive strength of stiffened panel considering influence of shear load北大核心CSCD

［Objective］This study aims to explore the law of the critical compression stress of stiffened panels under the influence of in-plane shear load, and whether in-plane shear load combined with lateral pressure will introduce a strong coupling effect. ［Method ］ To this end, nonlinear finite element (FE) software ABAQUS is used to perform numerical simulation analysis under combined loads on a group of FE models. A limit state equation/curve is then derived from the dimensionless calculation results based on the minimum square error method. ［Results］The results show that the influence law of in-plane shear load on the critical compression stress of stiffened panels is clarified, and a limit state equation of stiffened panels that considers the effect of shear load is obtained. ［Conclusion］The limit state equation in this paper can provide references for modifying the ultimate strength of stiffened panels under the influence of in-plane shear load. © 2023 Chinese Journal of Ship Research. All rights reserved.