Mechanical Behavior of a Glass-fiber Reinforced Composite to Steel Joint for Ships

The use of a glass-fiber reinforced composite in marine structures is becoming more common, particularly due to the potential weight savings. The mechanical response of the joint between a glass-fiber ...     

不规则响应产生的非粘结柔性立管螺旋条带应力分析（英文）

A helical wire is a critical component of an unbonded flexible riser prone to fatigue failure. The helical wire has been the focus of much research work in recent years because of the complex multilayer construction of the flexible riser. The present study establishes an analytical model for the axisymmetric and bending analyses of an unbonded flexible riser. The interlayer contact under axisymmetric loads in this model is modeled by setting radial dummy springs between adjacent layers. The contact pressure is constant during the bending response and applied to determine the slipping friction force per unit helical wire. The model tracks the axial stress around the angular position at each time step to calculate the axial force gradient, then compares the axial force gradient with the slipping friction force to judge the helical wire slipping region, which would be applied to determine the bending stiffness for the next time step. The proposed model is verified against the experimental data in the literature. The bending moment–curvature relationship under irregular response is also qualitatively discussed. The stress at the critical point of the helical wire is investigated based on the model by considering the local flexure. The results indicate that the present model can well simulate the bending stiffness variation during irregular response, which has significant effect on the stress of helical wire.     

Finite element simplified fatigue analysis method for a non-tubular joint of an offshore jacket platform

This paper proposes the finite element simplified fatigue analysis method for fatigue evaluation of the composite non-tubular joint structure of an offshore jacket subjected to wave loads. The skirt pile sleeve of the offshore jacket, which had been in service, was taken as an example of the non-tubular joint structure. SACS software was used for global analysis of multi-directional wave loads for the jacket platform, and ALGOR software was used to build a finite element model, perform finite element analysis, post-process stress results for acquiring the stress range, and perform fatigue evaluation. The analysis results indicate that the extreme stress range is within the allowable stress range and meets the requirements of DNV code. That means the simplified fatigue analysis method is effective and can be used in fatigue design for the non-tubular joint structure of an offshore jacket.     

Ultimate strength analysis of composite stiffened panels based on multi-scale approach北大核心CSCD

［Objectives］As composite materials have varied internal structures, an in-depth analysis of the damage mechanisms of their component materials can provide a research foundation for the ultimate strength analysis of composite stiffened panels. ［Methods］The microscopic, mesoscopic and macroscopic mechanical analyses of marine glass fiber reinforced plastic (GFRP) composite stiffened panels are carried out using a multi-scale approach. Microscopic and mesoscopic representative volume element (RVE) models of chopped strand mat (CSM) and woven roving (WR) materials are established, and the macroscopic equivalent stiffness is obtained by homogenizing the RVE models. The ABAQUS VUMAT subroutine is used to code the progressive damage evolution model of the composite materials to derive the damage evolution mechanism of the microscopic and mesoscopic models respectively. The equivalent strength of macroscopic laminates is also obtained. ［Results］The multi-scale approach can be used to accurately evaluate the macroscopic mechanical properties of composite materials, and the ultimate strength of composite stiffened panels is mainly determined by fiber bundle failure. ［Conclusions］The obtained macroscopic material parameters can be used to calculate the ultimate strength of composite stiffened panels, while the parametric study of the mesomechanics of composite materials can provide an analysis tool for investigating the influence of material processing technology. © 2023 Chinese Journal of Ship Research. All rights reserved.     

Response of carbon fiber trapezoidal corrugated sandwich structure under air explosion loading北大核心CSCD

The effects of the thickness of the face plate, angle of the wall plate and height of the core layer on the anti-explosion performance of carbon fiber reinforced composite trapezoidal corrugated sandwich structures were investigated. [Methods]First, based on the 3D Hashin failure criterion, a subroutine module of the damage evolution of fiber reinforced composites is developed using the VUMAT user subroutine interface in ABAQUS. Second, through comparison with experiments in the public literature, the effectiveness of the dynamic response simulation method of carbon fiber reinforced composites based on a development subroutine under explosion impact loading is verified. Finally, a parametric study on the explosion resistance of carbon fiber reinforced composite trapezoidal corrugated plates is carried out based on the numerical method. [Results]The results show that, compared with increasing the thickness of the blast face panel, increasing the thickness of the back blast face panel can improve the explosion resistance of the sandwich plate more obviously; when the folding angle of the core wall plate decreases from 45° to 30°, the explosion resistance increases by 1.3%; when it decreases from 60° to 45°, the explosion resistance increases by 6.3%; and whenthecoreheightincreasesfrom8mmto20mm, theexplosionresistanceincreasesby27.7%.[Conclusions]The results of this study can provide references for the explosion-proof design of carbon fiber reinforced composite sandwich structures. © 2023 Journal of Nanjing Agricultural University. All rights reserved.     

考虑温度梯度的弹-塑性冰山材料模型及有限元模拟应用（英文）

To simulate the FPSO-iceberg collision process more accurately, an elastic-plastic iceberg material model considering temperature gradient effects is proposed and applied. The model behaves linearly elastic until it reaches the ‘Tsai-Wu' yield surfaces, which are a series of concentric elliptical curves of different sizes. Decreasing temperature results in a large yield surface. Failure criteria, based on the influence of accumulated plastic strain and hydrostatic pressure, are built into the model. Based on published experimental data on the relationship between depth and temperature in icebergs, three typical iceberg temperature profiles are proposed. According to these, ice elements located at different depths have different temperatures. The model is incorporated into LS-DYNA using a user-defined subroutine and applied to a simulation of FPSO collisions with different types of icebergs. Simulated area-pressure curves are compared with design codes to validate the iceberg model. The influence of iceberg shape and temperature on the collision process is analyzed. It is indicated that FPSO structural damage not only depends on the relative strength between the iceberg and the structure, but also depends on the local shape of the iceberg.     

Stress analysis of the subsea dynamic riser baseprocess piping

Thesubsea dynamic riser base （SDRB） is an important piece of equipment for the floating production platform mooring system.One end is connected to the rigid pipeline, carrying a rigid pipeline thermal expansion load and the other end is connected to a flexible riser, carrying the dynamic load of the flexible riser, so its function is a transition connection between the flexible riser and the rigid pipeline which fixes the flexible riser on the seabed. On the other hand. as a typical subsea product, the design will satisfythe requirements of the standards for subsea products. By studying the stress analysisphilosophy of the topside piping and subsea pipeline, a physical model and procedure for piping stress analysis of the SDRB have been established.The conditions of the adverse design load have been considered, and a combination of the static load from the rigid pipeline and the dynamic load flexibility has also been optimized. And a comparative analysis between the AMSE, DNV and API standards for piping stress with the checking rules has been done.Because theSDRB belongs to the subsea pipeline terminal product, the use of DNV standards to check its process piping stress is recommended. Finally, the process piping stress of the SDRB has been calculated, and the results show that the jacket pipe and the carrier pipe stress of the SDRB process piping satisfy the DNV standards as a whole.The bulkhead cannot be accurately simulated by the AutoPIPE software which uses the FEA software ANSYS inthe detailed analysis, but the checking results will still meet the requirements of the DNV standards.     

Numerical modeling of exhaust smoke dispersion for a generic frigate and comparisons with experiments

The exhaust smoke dispersion for a generic frigate is investigated numerically through the numerical solution of the governing fluid flow, energy, species and turbulence equations. The main objective of this work is to obtain the effects of the yaw angle velocity ratio and buoyancy on the dispersion of the exhaust smoke The numerical method is based on the fully conserved control-volume representation of the fully elliptic Navier-Stokes equations. Turbulence is modeled using a two-equation （k-ε） model The flow visualization tests using a 1/100 scale model of the frigate in the wind tunnel were also carried out to determine the exhaust plume path and to validatc the computational results. The results show that down wash phenomena occurs for the yaw angles between ψ=10° and 20°. The results with different exhaust gas temperatures show that the buoyancy effect increases with the increasing of the exhaust gas temperature. However, its effect on the plume rise is less significant in comparison with its momentum. A good agreement between the predictions and experiment results is obtained.     

驱逐舰烟气排放过程数值仿真及同模型试验比较研究(英文)

The exhaust smoke dispersion for a generic frigate is investigated numerically through the numerical solution of the governing fluid flow, energy, species and turbulence equations. The main objective of this work is to obtain the effects of the yaw angle, velocity ratio and buoyancy on the dispersion of the exhaust smoke. The numerical method is based on the fully conserved control-volume representation of the fully elliptic Navier-Stokes equations. Turbulence is modeled using a two-equation(k-ε) model. The flow visualization tests using a 1/100 scale model of the frigate in the wind tunnel were also carried out to determine the exhaust plume path and to validate the computational results. The results show that down wash phenomena occurs for the yaw angles between ψ =10° and 20°. The results with different exhaust gas temperatures show that the buoyancy effect increases with the increasing of the exhaust gas temperature. However, its effect on the plume rise is less significant in comparison with its momentum. A good agreement between the predictions and experiment results is obtained.     

Research on low-frequency mechanical characteristics of the MR dampers in ship isolators

A new isolator composed of a steel rope spring and a magneto-rheological （MR） damper was designed and a study on low-frequency mechanical characteristics of MR dampers in isolators was carried out. It used the characteristics of the MR damper, such as fast response, controllable damping, small energy consumption, wide dynamic scope, and great adaptation. The relationships between MR damping forces and influencing factors were analyzed based on experimental data. The results show that damping force is not only related to structural dimensions, but also closely related to controllable current and vibration frequency. Finally, the empirical formula for damping forces was corrected, and the relationship between correction coefficients and factors analyzed.     

Research on low-frequency mechanical characteristics of the MR dampers in ship isolators

A new isolator composed of a steel rope spring and a magneto-rheological(MR) damper was designed and a study on low-frequency mechanical characteristics of MR dampers in isolators was carried out.It used the characteristics of the MR damper,such as fast response,controllable damping,small energy consumption,wide dynamic scope,and great adaptation.The relationships between MR damping forces and influencing factors were analyzed based on experimental data.The results show that damping force is not only related to structural dimensions,but also closely related to controllable current and vibration frequency.Finally,the empirical formula for damping forces was corrected,and the relationship between correction coefficients and factors analyzed.     

Strength reliability analysis of stiffened cylindrical shells considering failure correlation

The stiffened cylindrical shell is commonly used for thepressure hull of submersibles and the legs of offshore platforms.There are various failure modes because of uncertainty with thestructural size and material properties, uncertainty of the calculationmodel and machining errors. Correlations among failure modesmust be considered with the structural reliability of stiffenedcylindrical shells. However, the traditional method cannot considerthe correlations effectively. The aim of this study is to present amethod of reliability analysis for stiffened cylindrical shells whichconsiders the correlations among failure modes. Firstly, the jointfailure probability calculation formula of two related failure modesis derived through use of the 2D joint probability density function.Secondly, the full probability formula of the tandem structuralsystem is given with consideration to the correlations among failuremodes. At last, the accuracy of the system reliability calculation isverified through use of the Monte Carlo simulation. Result of theanalysis shows the failure probability of stiffened cylindrical shellscan be gained through adding the failure probability of each mode.     

Research on vibration and near-field soundradiation of ring-ribbed cylindrical shell coated deadening and decoupling materials

The research on structural vibration and sound radiation of underwater ring-ribbed cylindrical shell, which is coated with a kind of deadening and decoupling materials, becomes a focus in recent years. This paper analyzes the problem on two aspects: model experiment and numerical calculation. The model experiment is carried out including three cases firstly, in which the structural vibration response and radiating acoustic field are measured respectively, and the results gained in these three cases are analyzed to discuss the effect of reducing structural vibration and radiating noise of the deadening and decoupling materials. The coupling FEM/BEM and the SEA methods are both used in numerical calculation, i.e. the arithmetic of the coupling FEM/BEM method is adopted to calculate the low frequency characteristics and the SEA method is adopted to calculate the medium-high frequencies characteristics of the model. By comparing experimental results with numerical calculation results, it is proved that the algorithm adopted in this paper is reasonable.     

双平面焊接圆管截面DKT节点的中心撑杆鞍点及冠点位置的应力集中系数(英文)

A set of parametric stress analyses was carried out for two-planar tubular DKT-joints under different axial loading conditions.The analysis results were used to present general remarks on the effects of the geometrical parameters on stress concentration factors(SCFs) at the inner saddle,outer saddle,and crown positions on the central brace.Based on results of finite element(FE) analysis and through nonlinear regression analysis,a new set of SCF parametric equations was established for fatigue design purposes.An assessment study of equations was conducted against the experimental data and original SCF database.The satisfaction of acceptance criteria proposed by the UK Department of Energy(UK DoE) was also checked.Results of parametric study showed that highly remarkable differences exist between the SCF values in a multi-planar DKT-joint and the corresponding SCFs in an equivalent uni-planar KT-joint having the same geometrical properties.It can be clearly concluded from this observation that using the equations proposed for uni-planar KT-connections to compute the SCFs in multi-planar DKT-joints will lead to either considerably under-predicting or over-predicting results.Hence,it is necessary to develop SCF formulae specially designed for multi-planar DKT-joints.Good results of equation assessment according to UK DoE acceptance criteria,high values of correlation coefficients,and the satisfactory agreement between the predictions of the proposed equations and the experimental data guarantee the accuracy of the equations.Therefore,the developed equations can be reliably used for fatigue design of offshore structures.     

基于灰色系统理论的滑行艇运动姿态预报(英文)

In order to minimize the harm caused by the instability of a planing craft, a motion prediction model is essential. This paper analyzed the feasibility of using an MGM(1,N) model in grey system theory to predict planing craft motion and carried out the numerical simulation experiment. According to the characteristics of planing craft motion, a recurrence formula was proposed of the parameter matrix of an MGM(1,N) model. Using this formula, data can be updated in real-time without increasing computational complexity significantly. The results of numerical simulation show that using an MGM(1,N) model to predict planing motion is feasible and useful for prediction. So the method proposed in this study can reflect the planing craft motion mechanism successfully, and has rational and effective functions of forecasting and analyzing trends.     

Numerical computation of motions and structural loads for large containership using 3D Rankine panel method

In this paper, we present the results of our numerical seakeeping analyses of a 6750-TEU containership, which were subjected to the benchmark test of the 2 nd ITTC–ISSC Joint Workshop held in 2014. We performed the seakeeping analyses using three different methods based on a 3D Rankine panel method, including 1) a rigid-body solver, 2) a flexible-body solver using a beam model, and 3) a flexible-body solver using the eigenvectors of a 3D Finite Element Model(FEM). The flexible-body solvers adopt a fully coupled approach between the fluid and structure. We consider the nonlinear Froude–Krylov and restoring forces using a weakly nonlinear approach. In addition, we calculate the slamming loads on the bow flare and stern using a 2D generalized Wagner model. We compare the numerical and experimental results in terms of the linear response, the time series of the nonlinear response, and the longitudinal distribution of the sagging and hogging moments. The flexible-body solvers show good agreement with the experimental model with respect to both the linear and nonlinear results, including the high-frequency oscillations due to springing and whipping vibrations. The rigid-body solver gives similar results except for the springing and whipping.     

Crack detection using a frequency response function in offshore platforms

Structural cracks can change the frequency response function (FRF) of an offshore platform. Thus, FRF shifts can be used to detect cracks. When a crack at a specific location and magnitude occurs in an offshore structure, changes in the FRF can be measured. In this way, shifts in FRF can be used to detect cracks. An experimental model was constructed to verify the FRF method. The relationship between FRF and cracks was found to be non-linear. The effect of multiple cracks on FRF was analyzed, and the shift due to multiple cracks was found to be much more than the summation of FRF shifts due to each of the cracks. Then the effects of noise and changes in the mass of the jacket on FRF were evaluated. The results show that significant damage to a beam can be detected by dramatic changes in the FRF, even when 10% random noise exists. FRF can also be used to approximately locate the breakage, but it can neither be efficiently used to predict the location of breakage nor the existence of small hairline cracks. The FRF shift caused by a 7% mass change is much less than the FRF shift caused by the breakage of any beam, but is larger than that caused by any early cracks.     

基于三维波浪水池方法的浮体气隙估计方法研究（英文）

Computations for air gap response of a semisubmersible platform based on a 3D numerical wave tank approach are presented.The developed method is in time domain and can consider nonlinearities associated with incident wave and hydrostatic forces exactly in determining the body response, but the interaction hydrodynamics of radiation and diffraction are based on simplified linearization assumptions. The incident wave can be defined by any suitable wave theory and here defined by a fully nonlinear numerical wave model. After verifying the present computations results in its degenerated linearized version against the usual linear 3D Green function–based frequency-domain results for air gap predictions, systematic comparative studies are undertaken between linear and the approximate nonlinear solutions. It is found that nonlinear computations can yield considerably conservative predictions as compared to fully linear calculations, amounting to a difference of up to 30%–40% in the minimum air gap in steep ambient incident waves at high and moderate frequencies.     

Virtual prototype simulation on underwater hydraulic impingement shovel

The virtual prototype technology is applied to the design of the hydraulic impingement shovel, which is to increase the reliability of the design. The work principle of hydraulic impingement shovel is expatiated, and its dynamic equations are established. The 3D model of virtual prototype is built by PRO/E. Then the couple between the mechanical body of prototype and the hydraulic system is completed by virtue of ADAMS. Finally, the simulation is made on the virtual prototype. The simulation results show that the design of underwater hydraulic impingement shovel is rational. The virtual prototype technology could lay sound foundation of successful manufacturing of physical prototype for the first time and offer highly effective and feasible means for the design and production of underwater equipments.