外海防波堤棱体补抛施工技术

通过对外海防波堤近30米水深条件下棱体补抛施工方法、施工工艺、施工过程控制、施工质量控制等方面进行介绍、分析、比较，总结外海防波堤棱体补抛施工技术。     

关于港区堆场大面积混凝土浇注裂缝通病控制的探讨

通过本人监理堆场工程的整个控制过程，从监理角度对本工程中使用的施工前讨论控制、施工过程监控、施工后总结的等内容进行陈述。     

格宾生态护岸适用性与施工质量控制

格宾护岸因其良好的耐久性、透水性、绿色性，特别适用于地质条件差、水流条件复杂的河岸护坡，但存在施工管控难度大等问题。为研究格宾生态护岸在工程中的适用性及施工质量管理，结合实际施工管理经验，依托典型内河航道整治工程，从技术措施、原材料控制等方面进行重点分析，提出格宾生态护岸施工质量控制要点及控制措施，并成功用于京杭运河施桥船闸至长江口门段航道整治工程，提升了施工质量，提高了施工效率。应用成果可为类似格宾生态护岸施工提供借鉴。     

模块化管廊结构在危险品码头改造中的应用

为解决传统液体危险品码头改造中上部结构建设施工速度慢、施工质量难控制、施工安全风险高、经济性差等问题，进行了模块化管廊结构关键技术研究，首次将该结构应用于液体危险品码头改造中，提炼出模块化管廊结构设计与装配化施工过程中的尺寸控制、限位措施以及检测和纠偏措施等关键技术，并结合BIM技术进行施工过程管理。结果表明，该结构的应用可大幅缩短工期，减小施工期安全风险，提高工程质量，大大减小对已建码头营运影响，提升经济效益。     

杭州湾跨海大桥测量控制技术与管理（二）

3 测量控制管理 杭州湾大桥工程规模大，施工标段多，精度要求高，技术难度大。测量控制工作涉及桩基施工（包括打人桩和灌注桩）、承台施工、墩身施工（包括现浇和预制安装）、支座安装、砼箱梁施工（包括现浇和预制安装）、通航孔斜拉桥施工（包括主塔基础及主塔施工、钢锚箱安装、索导管定位、钢箱梁安装、桥面线形控制与调试）等多个施工项目。测量作业点多、面广、量大，任何细微差错都有可能导致大的质量事故。因此，如何把握重点、强化管理、规范工作程序、协调各方工作、保证工作质量，是大桥施工过程中测量控制工作面临的另一个重要课题。     

水下控制爆破技术在重力式码头建设工程中应用

分析广西钦州港5000吨件杂货码头港池水下控制爆破施工情况，介绍其水下控制爆破技术的原理、爆破安全参数、注意事项等，并对各施工爆破技术工艺和控爆方案要点进行阐述，为同类项目的施工提供参考.     

沉箱施工质量创优

在广州港南沙港区一期工程重力式沉箱施工中，经参建各方努力，有效地解决了混凝土裂缝控制、混凝土气泡控制和施工缝处理等耐久性问题。     

洋山深水港区四期工程大直径超长嵌岩桩精细化施工质量控制

嵌岩桩作为桩基工程的重要组成部分，施工环节多、质量控制难度大。从洋山深水港区四期水工码头嵌岩桩施工出发，从嵌岩桩成孔、安装钢筋笼、混凝土浇筑等方面，探讨通过精细化管理措施确保施工质量，并形成标准化控制流程，以供参考。     

现浇预应力混凝土连续梁施工浅谈

本文主要介绍在中山市港口某工程支架现浇预应力混凝土连续梁的施工过程中，就降低地基沉降及消除支架非弹性变形、钢筋混凝土施工过程质量控制、预应力张拉控制等方面所获得的施工体会。     

浅析金融危机对中交系统施工企业资金管理的影响及对策

在金融危机下，施工企业想在市场竞争中寻求发展，强化资金管理尤为重要。文章以中交集团及其所属施工企业为例，针对当前金融危机影响，从行业的特殊性、金融危机影响的表现等方面详细阐述了施工企业解决资金紧张、破解资金风险的对策，指出强化资金集中管理，强化应收帐款管理，强化海外资金管理，控制帐户总量，控制债务规模及结构，转变资金经营方式，建立资金的预算管理和预警机制等措施是缓解施工企业资金紧张的有力保证。     

Errata

正In the paper"Influence of Fouling Assemblage on the Corrosion Behaviour of Mild Steel in the Coastal Waters of The Gulf of Mannar,India"in Vol.12,No.4,Page:509,References were lost,and the two authors’biographies were identical.The correct text is shown below.We apologize to the authors and our readers for any inconvenience caused by the errors.     

Journal of Marine Science and Application 2014 Sum. Contents

正~~     

33rd International Conference on Ocean,Offshore and Arctic Engineering （OMAE2014）

正San Francisco,California,June 8-13,2014.OMAE 2014 is the ideal forum for researchers,engineers,managers,technicians and students from the scientific and industrial communities from around the world to:·meet and present advances in technology and its scientific support;·to exchange ideas and experiences whilst promoting technological progress and its application in industry·to promote international cooperation in ocean,offshore and arctic engineering.In line with the tradition of excellence of previous OMAE conferences,more than 900 technical papers are planned for presentation.Outreach for Engineers Specialty Forum This Specialty Forum is designed for students and professionals who may not be familiar with the Ocean and Offshore industry,as well as those who have just recently specialized in this field.     

联合作战计划和执行系统

全球指挥控制系统(GCCS)实施当前美国海军网络中心战信息基础设施的联合计划网络。联合作战计划和执行系统(JOPES)支持GCCS实现联合计划。JOPES有两类计划：时间不限的精密预案计划生成作战计划、方案计划或职能计划；时间敏感的危机行动计划生成作战命令或战役方案。前者在和平时期创建的作战计划是后者的计划基础，加速应付危机的能力。     

Recent progress on wave induced loading measurements in warships

Recent measurements of wave induced hull strain and flexure in RN warships are presented together with the derivation of the current design criteria for extreme hull girder bending loads. The history of the development of the shipboard instrumentation used is given and recent developments to improve the quality and ease of analysis of the data are described. An unexpectedly high transverse asymmetry in the longitudinal strains measured in destroyers is shown to be the result of a combination of vertical and lateral bending in oblique seas. Finally recent theoretical comparisons between the loading of Deep-Vee hulls and conventional UK rounded bilge hulls are presented which demonstrate the higher loading experienced by this type of hull form.     

The 11th International Conference on Hydrodynamics (ICHD 2014)

正19–24 October 2014 SingaporeCONFERENCE THEMES The overall aim of the ICHD Conference is to provide a forum for participants from around the world to review,discuss and present the latest developments in the broad discipline of hydrodynamics and fluid mechanics.The first International Conference on Hydrodynamics(ICHD)was initiated in 1994 in Wuxi,China.Since then,9 more ICHD conferences were held subsequently in Hong Kong,Seoul,Yokohama,Tainan,Perth,Ischia,Nantes,Shanghai and St Petersburg.Evidently the ICHD conference has become an important event among academics,researchers,engineers and operators,working in the fields closely related to the science and technology of hydrodynamics.The 11th ICHD will be held in Singapore in 2014.     

第十二届深水操作会议和展览会(英文)

正November 4-6,2014Moody Gardens HotelConvention Center/Galveston,TX The Deepwater Operations Conference and Exhibition is celebrating its 12th anniversary this year.This growing event will continue the tradition of excellence in addressing operational challenges involved in developing deepwater resources.We will return to the Moody Gardens Hotel and Convention Center on November 5-7,2014 in Galveston,Texas.     

Eastbound or westbound ?

In terms of equal sailing distances, where is the inflexion when ships depart from ports in the Asian Continent to New York via Suez and/or Panama？
The answer is China South Port Group （Hong Kong, Shenzhen and Guangzhou）.     

Impact of regulation on the performances of long-distance transport services: A comparison of the different approaches in Sweden and Norway

Despite the many socio-economic similarities between Sweden and Norway, differences in jurisdiction, organisation, cooperation, and financing of long-distance passenger train and coach services have led to the development of four distinctively different ways of serving the markets. This paper describes how the train and coach markets have developed in the two countries, with emphasis on regulatory and industrial structure and a couple of performance variables.Looking at passenger rail, both countries separated infrastructure from operation over a decade ago. However, while Norwegian rail is characterised by an almost monopoly supplier, rail services in Sweden are partly decentralised to the responsibility of county authorities and are widely subjected to competitive tendering. The rest of the network is about to be opened up for on-the-track competition. Swedish Rail (SJ) has spent the last decades consolidating its core business (passenger rail) and sold out its other businesses. In contrast, the Norwegian state rail (NSB) has expanded its business to become a major bus operator and property owner, with extensions also into the Swedish market.The coach industry was more recently deregulated in both countries. The Swedish coach market is dominated by privately owned companies operating services to and from Stockholm. In Norway, state-owned NSB is a major coach operator on medium distance routes, and is also the largest partner of Nor-Way Bussekspress which totally dominates long-distance coach services. Further, the Norwegian coach market is characterised by cross-ownership and cooperation which has enabled an extensive route network which covers most of Norway.We find distinct differences in achievements in the two modes and in the two countries. Swedish rail services have succeeded in winning market shares and in renewing and developing both infrastructure and service levels to a greater extent than the Norwegian model. On the other hand, the Norwegian coach market seems to be more developed and efficient compared to its Swedish counterpart.The paper concludes with a discussion on the possible links between the different approaches and the performance observed, with the aim to stimulate further and more detailed research on some important issues.     

某海港码头的撞损修复

依据码头撞击受损区域调查检测结果,对受损构件提出合理的修复方案,为码头的安全运行提供保障。