沈阳地铁工程进度控制

介绍了沈阳地铁运用进度控制的方法进行工程计划管理以及采取的措施。     

带保护线的全并联AT供电方式故障测距方案研究

提出了1种能够适合带保护线的全并联AT供电系统的故障测距方案.首先根据转移阻抗法推导出带保护线的全并联AT供电系统的测距公式,再找到带保护线的AT供电方式故障测距公式中阻抗的计算方法,解决了目前没有带保护线等值电路情况下的阻抗计算问题,最后运用Matlab/Simulink仿真验证故障测距公式的适用性.     

小型海船锚系布置快速性设计方法研究

由于《海船艏锚泊设计导则》(CB/Z 280-2011)只适用于载重2 000 t以上的钢质海船,未对小型海船的锚泊设计提出指导,故小型海船的锚泊设计需另寻方法。在总结小型海船锚系布置设计特点的基础上,针对小型海船锚链筒的布置即使反复调整其空间位置也难以满足对其长度的要求等问题,通过对锚链筒位置的几何模型进行分析,采用解析几何法解决了锚链筒的定位;基于CAD二次开发,实现了锚链筒最优位置确定。经验证,该方法速度快,能满足小型海船锚系布置的要求。     

Investigating micro-simulation error in activity-based travel demand forecasting: a case study of the FEATHERS framework

Activity-based models of travel demand have received considerable attention in transportation planning and forecasting in recent years. However, in most cases they use a micro-simulation approach, thereby inevitably including a stochastic error that is caused by the statistical distributions of random components. As a consequence, running a transport micro-simulation model several times with the same input will generate different outputs, which baffles practitioners in applying such a model and in interpreting the results. A common approach is therefore to run the model multiple times and to use the average value of the results. The question then becomes: what is the minimum number of model runs required to reach a stable result? In this paper, systematic experiments are carried out using Forecasting Evolutionary Activity-Travel of Households and their Environmental RepercussionS (FEATHERS), an activity-based micro-simulation modelling framework currently implemented for the Flanders region of Belgium. Six levels of geographic detail are taken into account. Three travel indices – average daily activities per person, average daily trips per person and average daily distance travelled per person, as well as their corresponding segmentations – are calculated by running the model 100 times. The results show that the more disaggregated the level, the larger the number of model runs is needed to ensure confidence. Furthermore, based on the time-dependent origin-destination table derived from the model output, traffic assignment is performed by loading it onto the Flemish road network, and the total vehicle kilometres travelled in the whole Flanders are subsequently computed. The stable results at the Flanders level provides model users with confidence that application of FEATHERS at an aggregated level requires only limited model runs.     

THE EXPERIMENTAL STUDY ON THE CELL APOPTOSIS AND EXPRESSION OF BCL-2 PROTEIN IN INTRACEREBRAL HEMORRHAGE IN MODEL OF RATS

Intra-cerebral hemorrhage is a common clinicaldisease,with a high mortality and morbidity.So itis one of the clinical hot topics.It has been foundinrecent years that there is a close relationship bet weenthe cell apoptosis and the course or prognosis of in-tra-cerebral hemorrhage.Bcl-2,as the apoptosis-adjusted gene,plays ani mportant role in the courseof cell apoptosis,but the mechanis min the cell ap-optosis in intra-cerebral hemorrhage remains un-clear.In this experi ment,with the model bui…     

公路事故多发段点改造与安全设计

从提供安全的道路交通设施和道路安全管理的角度,介绍了公路事故多发段点的鉴别、改造与安全设计,目的在于改善现有道路的安全水平,并找出道路交通设计中的缺陷,将一些安全隐患消灭在规划、设计阶段,以减少交通事故造成的损失.     

动车组用分体式冰箱设计分析

根据动车组用冰箱在高速振动及低温恶劣环境的应用特点,采取措施,加强冰箱结构强度和减振设计,提出在低温环境运行所使用的设计方法。通过理论设计和试验验证,设计出适应动车组运行条件的分体式冰箱,同时指出铁路餐车冰箱标准在执行过程遇到的问题。     

帷幕灌浆在盾构隧道中的应用

广州市轨道交通5号线西场站一草暖公园站盾构隧道右线区间YDK6+ 767～YDK6+ 500段地质情况十分复杂,地层中存在高压水、破碎带及红层溶蚀空洞.3#联络通道地面注浆时浆液流入土仓导致刀盘无法转动而停机.为此,施工时在做好盾构机注浆保护的同时,在该地段采用了地面帷幕灌浆施工工艺.介绍了该地段地面帷幕灌浆的施工顺序...     

某型号柴油机喷油器衬套加工工艺攻关

由于气缸盖中喷油器衬套材料改为42CrMo,材料又硬又黏,采用原工艺方法加工在摇臂钻床加工底平面,已不能满足产品图样要求,现改为在加工中心锪底平面,通过多次工艺试验,选定了三刃螺旋硬质合金立铣刀具,优化了工艺方案,确定了合理的工艺参数,为产品的研制和批量生产提供可靠的技术支持.