冰区核电平台系泊设计及影响研究

本文根据冰区浮式核电平台的主要功能及外部环境条件,确定平台的基本形式,并在此基础上进行了系泊系统的优化设计.与以往研究不同的是,考虑到冰区海洋的特殊性,除计算风、浪、流作用情况外,还运用Sdem软件构造了海冰离散单元模型,对海冰与海洋系泊结构物的相互作用过程进行了数值模拟.在此基础上,结合系泊分析软件ANSYS-AQWA的二次开发功能,对平台运动及其系泊系统进行了时域耦合分析,研究了平台在不同环境载荷作用下的运动响应;进行了系泊参数研究,分析一般规律,最终提出了一种满足规范要求且性能优良的系泊方案.研究结果表明:本文提出的冰区核电平台系泊系统可抵抗恶劣的环境影响;通过合理选择系泊缆数量、夹角、预张力大小及顶端倾角等系泊参数,可减小平台运动响应.     

基于深度强化学习的智能船舶航迹跟踪控制

[目的]智能船舶的航迹跟踪控制问题往往面临着控制环境复杂、控制器稳定性不高以及大量的算法计算等问题。为实现对航迹跟踪的精准控制,提出一种引入深度强化学习技术的航向控制器。[方法]首先,结合视线(LOS)算法制导,以船舶的操纵特性和控制要求为基础,将航迹跟踪问题建模成马尔可夫决策过程,设计其状态空间、动作空间、奖励函数;然后,使用深度确定性策略梯度(DDPG)算法作为控制器的实现,采用离线学习方法对控制器进行训练;最后,将训练完成的控制器与BP-PID控制器进行对比研究,分析控制效果。[结果]仿真结果表明,设计的深度强化学习控制器可以从训练学习过程中快速收敛达到控制要求,训练后的网络与BP-PID控制器相比跟踪迅速,具有偏航误差小、舵角变化频率小等优点。[结论]研究成果可为智能船舶航迹跟踪控制提供参考。     

公路城际出行链模式划分及其形成机制

为划分公路城际出行链模式并分析其形成机制,本文考虑城市内部换乘过程,解析了公路旅客城际出行过程.利用昆明市1 757份公路旅客出行调查问卷数据,提取了公路城际出行链结构特征.通过测算出行链结构值,提出了公路城际出行链模式的划分方法,将公路客运城际出行链模式划分为Ⅰ、Ⅱ、Ⅲ类并分别获取了其形成机制.结果表明:昆明市公路城际通道的平均运距为237.95 km,公共交通是公路城际出行过程中城市内部换乘的主要交通方式;昆明市公路城际出行链的3类模式占比为13.9∶6.4∶4.7,整体结构较合理;其中,Ⅱ类出行链模式最能体现均衡、稳定的形成机制.对公路城际出行链的形成机制分析发现,收入因素是促使出行链结构合理化的重要动力;造成出行链结构不合理的重要因素是市内出行延误,而非城际通道出行过程.     

内孤立波作用下水下潜器的载荷特性数值分析

为了研究海洋内孤立波作用下潜器的载荷特性,以RANS方程为控制方程,依据Kdv,eKdv和mKdv三类内孤立波理论计算速度入口,建立两层流体中内孤立波与水下潜器相互作用的数值模拟方法,计算分析内孤立波作用下潜器的水平力、垂向力和力矩的变化规律.结果表明,数值模拟得到的内孤立波波形及振幅与其对应理论解和文献中实验结果吻合良好.潜器的受力变化规律与内孤立波波幅、上下层水深比和潜器潜深有关.     

高速路网不停车收费车道优化布设方法

合理设置高速公路收费站ETC (Electronic Toll Collection)车道数量，对高速公路通行效率至关重要。针对目前路网中ETC与MTC (Manual Toll Collection)车辆混行的情况，考虑ETC的普及率，结合多用户路网均衡模型和排队论方法，建立基于双层规划模型的高速路网ETC车道优化布设方法。上层模型以车辆总通行时间最小为目标，优化设置进出收费站的ETC车道数量；下层模型为多用户路网均衡模型，反映ETC和MTC车辆的路径和收费车道选择行为。下层模型通过设计收费站的等价拓扑结构，表征收费站的车道使用规则及车辆的收费车道选择行为，并采用排队论方法估计ETC和MTC车道的收费排队时间。根据模型的特点设计了基于主动集的启发式算法，利用参数二进制与拉格朗日函数法确定迭代下降方向，解决了下降方向与步长难以计算的问题；通过内嵌优化函数的方式，保证在主动集转化过程中上层约束均不会失效，且避免了迭代过程中的模型解退化问题。基于上海市绕城高速进行实证分析，结果表明：随着ETC普及率的提升，收费排队时长按照负指数趋势下降；与按比例布设ETC车道的方法相比，所提方法最高可降低57.4%的收费排队时间，且该方法可以避免ETC车道布设过多对于MTC车道通行能力挤压造成的负面效果。研究成果可以有效指导高速路网ETC车道的布设，提高路网通行效率。     

Development of knowledge based body structure concept design model

The purpose of this study is to propose a concept design process for an automotive body structure using technical information on the major joints and members of vehicles. First, in order to collect the technical information on major joints and members, 17 vehicles were selected using benchmark data. The collected technical information for the selected vehicles was the cross sectional shapes of each joint and member which were used for the analysis of joint stiffness, crashworthiness and static stiffness of the member to make a database along with cross section properties. This study applied a ‘What If Study’ technique to perform a concept design of an automotive body using the analyzed information and selected cross section meeting the design objectives. The criteria for the selection of the cross section were defined by subdividing the defined design objectives of an automotive body structure and constraints into members and joints. In order to configure an analysis model of an automotive body structure using the selected cross section, a shape parametric model was used and static stiffness, dynamic stiffness and crashworthiness were assessed to evaluate the configured automotive body structure. The evaluation result showed that the crashworthiness and static/dynamic stiffness were improved compared to an existing body structure. In addition, the weight of the body structure was reduced. Through this study, the process that can rapidly and effectively derive and evaluate the concept design of an automotive body structure was defined. It is expected that, henceforth, this process will be helpful for the study of automotive body structures.     

Nanoparticle emission characteristics and reduction strategies by boost pressure control and injection strategies in a passenger diesel engine

This research attempted to analyze nanoparticles and other harmful exhaust emissions in accordance with injection strategies and air-fuel ratio (AFR) changes for small diesel engines. The emission characteristics were analyzed in the medium-speed condition, which is the main driving range of a diesel engine. In the case of particulate matter (PM), the number of particles was measured, analyzed, and compared to identify the correlation and emission characteristics of nanoparticles by using a dilution device and condensation particle counter (CPC), which are international standards for particle measurement recommended by the Particulate Measurement Programme (PMP). The engine torque tended to be reduced as pilot injections were added, and the torque was increased by the increased boost pressure, but reduced by the exhaust pressure increase in a part of the low-load range. The number of nanoparticles was not influenced greatly by the change in AFR, but the reduction effect on the PM weight was great depending on the boost pressure increase. In addition, the number of nanoparticles tended to increase as the fuel injection timing became closer to TDC in all conditions, and its difference became larger with an increase in AFR. In addition, in the case of the pilot injection, nanoparticle emission showed similar characteristics depending on the main injection timing, but it was increased by advanced injection timing when performing the main injection only, and the number of the nanoparticles increased as pilot injections were added. Last, the optimal conditions for EMS calibration were analyzed by selecting the conditions of torque reduction and NOx increase within 5 % from all of the engine operating conditions; optimized conditions are presented.     

舟山岛域围垦对邻近水道泥沙运动和海床演变影响分析

舟山海域岛域围垦与一般近岸滩涂围垦不尽相同,具有地理位置和水动力环境的特殊性。采用舟山钓梁围垦区附近海域不同时期的水下地形资料,并结合邻近螺门渔港水道围垦前后2个时期的水文泥沙调查资料,对岛域围垦环境下水道附近海域泥沙动力和海床冲淤变化特征进行了分析。结果表明,岛域围垦后螺门渔港水道潮汐变化并不显著,但是潮流流速大幅度减少,潮流挟沙能力随之减弱,净输沙量减少了90.1%,且净输沙方向由落潮方向变成涨潮方向。泥沙动力条件的改变促使水道及附近海域海床冲淤环境发生根本性变化,由围垦前槽冲滩淤演变为围垦后大幅度淤积,水道最大淤积厚度可达26 m。根据分析认为,围垦工程改变了水道悬沙的输移沉降模式,围垦前大量的泥沙以过境形式输移,而围垦后悬沙进出因围垦而形成的岙湾将以沉降为主。     

高速公路直线路段突起路标间隔设置方法

基于驾驶人的视觉惰性、视觉警示频率和感觉特性,分析了突起路标的视觉警示作用,确定了突起路标的闪现频率,计算与修正了突起路标的初始间隔。应用ADAMS/Car仿真软件模块,建立了道路、车辆和突起路标模型,将车型设置为大型车和小型车,大型车的车速设置为60、80、100km·h-1,小型车的车速设置为80、100、120km·h-1,大型车和小型车的方向盘转角均设置为1°、3°、5°。分别对提出的12m间隔与现行规范推荐的15m间隔各进行243次仿真,分析振动警示效果。仿真结果表明:在12m间隔下,平均碾压率为93.1%,小型车和大型车对应的平均警示率分别为41.7%和5.6%;在15m间隔下,平均碾压率为93.7%,小型车和大型车对应的平均警示率分别为33.3%和28.9%;12、15m间隔对小型车都具有较好的振动警示效果,15m间隔对大型车的振动警示效果更好。当高速公路夜间交通流较大或需要加大交通设施的夜间安全效果时,可选12m间隔提供良好的视觉连续性和视觉警示效果;考虑施工维护的方便性和经济性或者大型车比例较大时,可选择15m间隔。