转移排队车辆控制尾气排放的应用实例

为了缓解苏格兰法夫（Fife）地区库珀（Cupar）镇的交通拥堵，减少关键区域的尾气排放，用S-Paramics模型进行测试。采取的措施是把排队车辆转移到道路宽阔且建筑物较矮的路段，使车辆尾气易于扩散。测试结果显示，该方法能显著减少关键区域的尾气排放量，而车辆行程时间基本保持不变。项目的评价标准不是基于传统的行程时间和车辆运营成本的节约，而是考虑了行人和当地商业的利益。     

Chemical and mineralogical composition of marine sediments, and relation to their source and transport, Gulf of Carpentaria, Northern Australia

The Gulf of Carpentaria is an epicontinental sea, deeply indented in the north of the Australian continent. A selection of 100 samples of the surficial marine sediments collected on a regional grid were analysed for major chemical elements and mineral phases using wet chemistry, X-ray diffraction, optical and electronic microscopy.The surficial sediments of the Gulf are highly heterogenous and consist of both young and relict mineral and carbonate components. The terrigenous fraction is fluvial in origin and consists mainly of quartz (16–68%), minor feldspars (0–9%) and traces of siderite. The clay species determined include kaolinite, mixed layers of smectite–illite and illite; clays range up to 15% and do not present a clear pattern of distribution. Biologically productive areas of the Gulf, mainly in shallower parts, supply the carbonate component of the sediment. The carbonate material is comprised of aragonite (7–30%), low-Mg (5–30%) and high-Mg calcite (7–28%), and has variable degrees of alteration caused by sediment transport and/or diagenesis. Such processes are partly reflected in the regional distribution of mineral and chemical components throughout the Gulf. The interpretation of the data set was further refined by cluster analysis (Ward's method), which separated eight clusters (provinces) of sedimentary material. The eastern side appears to be the main source of both terrigenous and carbonate sediment, which is inferred to be transported clockwise. During this dispersion, physicochemical and mineralogical changes take place; the sediments become finer grained and characterised by more stable species of carbonates. As a consequence, the center and the northwest sections are clay-rich and contain dominantly low-Mg calcite.Ooids are relict components that have been identified in areas in which they were not mentioned by previous studies, notably in the southeast. These carbonate particles consist of concentric layers of aragonite deposited around a nucleus of angular quartz, most likely of fluvial origin.This study indicates a complex history over a short time frame with sediment supply, biological production and current patterns being the main factors that control the sediment character and its regional distribution within the Gulf.     

Multimodal transport in the new millennium

Consignors of goods in international trade want their containers to move door to door whether by land, sea or air — smoothly, seamlessly and at predictable cost. What they actually get from the law is at best a jerky roller coaster: a series of contracts, one for each mode or stage of the journey, contracts with various people and with liability that varies too. All agree that the law should change but attempts to agree on an entirely new multimodal regime have failed. Recently attempts have been not to start again but to expand an existing and established regime. The latest of these, the UNCITRAL draft, is essentially maritime: it applies to the sea phase but and goes further to apply door to door except when its path is blocked by compulsory unimodal law. Has Venus at last arisen from the waves? And what will happen when Beauty meets the Beast in the form of CMR? This article addresses the problems that will be encountered by an ambitious amphibious instrument of this kind. — problems of integration, of compatibility with local legal culture, and of methodology.     

Multi-fidelity optimization of a high-speed foil-assisted semi-planing catamaran for low wake

The wakes of high-speed passenger-only ferries that operated through Rich Passage, on the Seattle-Bremerton ferry route, caused beach erosion and damage to habitat. A task was initiated to design a low-wake high-speed vessel using multi-fidelity CFD based design optimization by using low-fidelity potential flow solvers for initial global design optimization and by using URANS solvers for high-fidelity tuning of the optimized design. This simulation based design process involved a close collaboration between ship designers, and hydrodynamics and CFD specialists, whose collective expertise guided the evolution of the design based on both hydrodynamic and structural aspects. The initial hull shape optimization using potential flow code was carried out by blending three different initial concepts provided by the designers. Subsequently, URANS was used to evaluate the potential flow optimized hull and to further optimize the hull configuration parameters, namely, the centre-of-gravity, demihull spacing, foil location, foil angle and slenderness ratio at different displacement conditions. The URANS based configuration optimization also took into account the far field wakes’ energy spectrum with an objective of reducing the energetic, low frequency far field wakes which are associated with beach flattening on the mixed sand and gravel beaches. Calculation of the far field wake using URANS would require an unfeasibly large domain size; therefore, a Havelock code with a source distribution matching the URANS calculated near field wave elevation was used to propagate the wakes into the far field. The end result of the optimization was a design with significantly reduced far field wake, which is currently being built for experimental testing.     

大众手工作业——试架大众辉腾

每年大众出品的汽车数以万计,但其中只有极少的数量由资深技师们手工打造。这些手工产品只为那些喜欢低调的大佬们准备,精细的工艺,宽敞的空间,以及高科技的配置让这些“手工作业”成为大众的招牌,它们有一个名字——辉腾。     

Revisiting the notion of induced traffic through a matched-pairs study

In investigating the question of the existence of "induced demand" in connection with highway expansion projects, Hansen et al. (1993) studied eighteen California state highway segments whose capacities had been improved in the early 1970s. For the present study, these segments were paired with control segments that matched the improved segments to unimproved ones with regard to facility type, region, approximate size, and initial volumes and congestion levels. Taking annual data for average daily traffic (ADT) and design-hour-traffic-to-capacity (DTC) ratios during the 21 years 1976–1996, three approaches were used to compare growth rates between the improved and unimproved segments: overall growth comparisons for the matched pairs, repeated measures analysis, and analysis of matched mean profiles. We found the growth rates between the two types of segments to be statistically and practically indistinguishable, suggesting that the capacity expansions, in and of themselves, had a negligible effect on traffic growth over the period studied. Reasons for the differences between these results and those of aggregate cross-sectional models finding a significant induced demand effect are discussed. Our analyses suggest that the aggregate models may overestimate induced traffic due to the attribution of at least a fraction of the observed traffic growth to "induced demand" rather than to some of the confounding factors which were not controlled for in such studies. At the same time, it is noted that the traffic induced by capacity expansion may in certain circumstances be larger than that observed in the present study, with the effect of new highway construction on traffic growth being a prime candidate for scrutiny in this regard. The results of this study nonetheless suggest that, for existing facilities, the size of the induced-traffic effect that can be attributed to capacity enhancements may be sufficiently small that its detection in a case-control study would be difficult, if not impossible, without a substantially larger sample size.     

达喀尔，我来了 威麟年队征战达喀尔拉力赛侧记

“我可带你一起去敲击冒险之门，但打开这扇命运挑战之门的是你自己。”——泽利·萨宾。作为达喀尔拉力赛的创始人，泽利·萨宾毫不讳言这项赛事的艰难。2010年，对于中国达喀尔迷来说更值得期待，因为第一次。中国车来了……     

钢铁企业寻求开辟新的补给线

中国主要钢铁公司表示，鉴于目前市场重拾信心，将着手建立新的补给渠道。但行业分析人士却认为，在钢铁价格渐趋平稳、银行拒绝提供资金的环境下，现在想更新或扩张船队绝非易事。     

Experimental investigation of the strength and stability of submarine pressure hulls with and without artificial corrosion damage

A submarine may have to operate for a period of time with local corrosion damage in the pressure hull if a suitable repair method is unavailable or too expensive for implementation. This paper describes collapse tests on twenty ring-stiffened aluminium cylinders, which were conducted to study the effect of corrosion damage on hull strength and stability. Artificial hull thinning was found to reduce the collapse strength of experimental models through high local stresses in the corroded region, leading to early onset of yielding and inelastic buckling. Bending associated with the eccentricity due to one-sided thinning was found to further increase the local stresses in the hull. Overall collapse pressures were more severely affected by corrosion damage than interframe collapse pressures. The percentage reduction in overall collapse pressure, compared with intact experimental models, was found to be closely related to the percentage depth of thinning. The accuracy of conventional collapse pressure predictions for the experimental models was significantly better for intact than for corroded cylinders.