中国试图通过税务优惠提高洋山港货运量

中国计划向利用国内港口转运货物的出口企业提供税务激励,以从国外竞争对手那里吸引更多货运量.例如,从青岛、武汉起程的出口船只如果利用上海洋山港转运,将可获得退税.这一计划由国务院实施,将针对干散货船和集装箱船展开,以帮助国内港口与邻近的航运中心竞争.     

Performance Benefits in Passive Vehicle Suspensions Employing Inerters

A new ideal mechanical one-port network element named the inerter was recently introduced, and shown to be realisable, with the property that the applied force is proportional to the relative acceleration across the element. This paper makes a comparative study of several simple passive suspension struts, each containing at most one damper and inerter as a preliminary investigation into the potential performance advantages of the element. Improved performance for several different measures in a quarter-car model is demonstrated here in comparison with a conventional passive suspension strut. A study of a full-car model is also undertaken where performance improvements are also shown in comparison to conventional passive suspension struts. A prototype inerter has been built and tested. Experimental results are presented which demonstrate a characteristic phase advance property which cannot be achieved with conventional passive struts consisting of springs and dampers only.     

Effect of welding sequence on residual stress and distortion in flat-bar stiffened plates

Numerical simulation based on finite element modelling is used to study the influence of welding sequences on the distribution of residual stress and distortion generated when welding a flat-bar stiffener to a steel plate. The simulation consists of sequentially coupled thermal and structural analyses using an element birth and death technique to model the addition of weld metal to the workpiece. The temperature field during welding and the welding-induced residual stress and distortion fields are predicted and results are compared with experimental measurements and analytical predictions. The effect of four welding sequences on the magnitude of residual stress and distortion in both the plate and the stiffener is investigated and their effects on the ultimate strength of the stiffened plate under uniaxial compression are discussed. Appropriate conclusions and recommendations regarding the welding sequence are presented.     

中国船东新贵蓄势待发

船队扩张已被中国的一些新兴船东提上议事日程。据当地的经纪人观察，越来越多的迹象表明，私人船东已在这方面有所动作。尽管不少老牌船东仍在为融资问题而一筹莫展，一批新运营商却已跃跃欲试，将目光投向更多船只，其中就包括珠海新世纪航运、广东粤电航运及舟山中昌海运。据了解，这三家公司前期一直在考察各种散货船，为船队扩张作准备。作为新一代船东的代表，他们有的是野心，而且之前手中已有不少新船在建，融资大多由实力雄厚的母公司或租赁实体提供。     

Experimental study on a model azimuthing podded propulsor in ice

The objective of this study was to investigate the performance of a model azimuthing podded propulsor in ice-covered water. Model tests were carried out with two different depths of cut into the ice (15 and 35 mm), two different ice conditions (presawn and pack ice conditions), and four different azimuthing angles. The depth of cut is the maximum penetration depth of the propeller blade into the ice block. The 0.3-m-diameter model propeller was operated in a continuous ice milling condition. Ice loads were measured by several sensors which were installed in various positions on the model. Six one-axis pancake-style load cells on the top of the model measured the global loads and two six-component dynamometers were installed on the shaft to measure the shaft loads. One six-component dynamometer was attached to the one of the propeller blades inside the hub to measure the blade loads. The pod unit and propeller performance in ice are presented. Ice-related loads, which were obtained when the blade was inside the ice block, are introduced and discussed. During the propeller–ice interaction, a blade can experience the path generated by the previous blade, which is called the shadowing effect. The effects of shadowing, depth of cut, azimuthing angle, and advance coefficient on propulsor performance are presented and discussed.     

The construction and use of continuous autoregressive models for traffic indices

This article discusses the use of continuous autoregressive models to describe the behavior of traffic indices. From discretely sampled data, second-order differential equation models are constructed to represent dynamic traffic fluctuations as the response of a linear system to a stochastic forcing function. The results are compared to the more common M/G/∞ queueing model approach, and the analysis is demonstrated on time series of aircraft concentration in thirty-one enroute air traffic control sectors.     

中国交通工程面临的挑战

在为上海市政府编写了交通白皮书初稿的4年之后,ColinBuchanan公司又受邀为已出版的白皮书的修改提供建议,以解决交通拥堵问题和确定不同交通方式应起的作用.建议提出应发展比导致拥堵的小汽车和出租汽车更好的交通方式,然后鼓励大众使用它们.依据在上海工作的经历,对中国交通工程面临的部分问题进行了阐述.     

Design of passive vehicle suspensions for maximal least damping ratio

This paper studies the use of the least damping ratio among system poles as a performance metric in passive vehicle suspensions. Methods are developed which allow optimal solutions to be computed in terms of non-dimensional quantities in a quarter-car vehicle model. Solutions are provided in graphical form for convenient use across vehicle types. Three suspension arrangements are studied: the standard suspension involving a parallel spring and damper and two further suspension arrangements involving an inerter. The key parameters for the optimal solutions are the ratios of unsprung mass to sprung mass and suspension static stiffness to tyre vertical stiffness. A discussion is provided of performance trends in terms of the key parameters. A comparison is made with the optimisation of ride comfort and tyre grip metrics for various vehicle types.     

Towards a simplified performance-linked value for money model as a reference point for bus contract payments

The burgeoning commitment to contracting the delivery of bus services through competitive tendering or negotiated performance-based contracts has been accompanied by as many contract payments schemes as there are contracts. We are now well placed to design a simplified performance-linked payment (SPLP) model that can be used as a reference point to ensure value for money, given the accumulation of experiences throughout the world which have revealed substantive common elements in contracts. Whether the payment to the operator is framed as a payment per passenger or as a payment per service kilometre, the SPLP identifies efficient subsidy outcomes that are linked to a proxy indicator of net social benefit per dollar of subsidy. We illustrate how the SPLP model can be applied to obtain the gross (subsidy) cost per passenger (or per passenger km) from measures of gross cost efficiency and network effectiveness. This model can then be used as part of a benchmarking activity to identify reference value of money prospects in respect of passengers per $ subsidy outlay by adjusting for influences not under the control of the service provider. A single framework to identify contract payments to operators, and to assess (i.e., benchmark) operator performance on critical KPIs, is provided by internalising critical key performance indicators (KPIs) in the design of the SPLP. The proposed SPLP model is sufficiently general to be independent of the procurement method (competitive tendered or negotiated, for example) and of the treatment of revenue allocation (net or gross based contracts), with the additional advantage of being able to assess value for money for government.