公路料场开采与生态恢复的环保措施研究

公路料场在开采时会直接给生态环境造成影响。文章结合实际以公路料场开采与恢复为研究对象,阐述公路料场开采中环境因素受到的影响,而后对石料开采与环境保护内容进行解析,同时提出了采石场生态恢复方法,希望分析后能够给相关的同类工程提供一些参考。     

中国近周边海域船舶排放清单及排放特征研究

为分析我国沿海船舶大气污染物排放特征,本研究以船舶自动识别系统数据为基础,收集整理国内外船舶静态数据、排放参数,结合船舶实际航行资料,采用动力法估算了中国近周边海域2014年的船舶排放清单,并分析了靠港、锚泊、港内机动、低速、巡航5个船舶状态下的排放特征,按不同海区对排放进行了统计,并给出了我国三个排放控制区的船舶大气污染物排放情况。结果表明,中国近周边海域范围内由于船舶活动一年产生的硫氧化物、氮氧化物、PM10分别约为87.98万吨、137.84万吨、11.73万吨。排放源分析表明,在船舶的主机、辅机和锅炉3种排放源中,主机是主要排放源,且在航行状态上低速巡航状态排放最大。船舶排放污染物的空间分析表明,90%的船舶排放发生在海岸线至领海基线外96海里范围内,即距离陆地200公里的海域内。     

Ridership drivers of bus rapid transit systems

We have collected information on 46 bus rapid transit (BRT) systems throughout the world to investigate the potential patronage drivers. From a large number of candidate explanatory variables (quantitative and qualitative), 11 sources of systematic variation are identified which have a statistically significant impact on daily passenger-trip numbers. These sources are fare, headway, the length of the BRT network, the number of corridors, average distance between stations; whether there is: an integrated network of routes and corridors, modal integration at BRT stations, pre-board fare collection and fare verification, quality control oversight from an independent agency, at-level boarding and alighting, as well as the location of BRT. The findings of this paper offer important insights into features of BRT systems that are positive contributors to growing patronage and hence should be taken into account in designing and planning BRT systems.     

A two-phase model for dry port location with an application to the port of Dalian in China

This paper provides guidance for an optimal and reasonable dry port layout for the port of Dalian in China. We present a two-phase framework on the location of dry ports, which solves the selection of candidate inland cities and optimal dry port location choice, respectively. Fuzzy C-Means Clustering is applied to select alternative cities in the vast hinterland of the seaport of Dalian, with a view to identify evaluation factors that affect the location selection decision. A cost-minimisation linear programming solution is proposed, with the aid of a genetic algorithm, to choose the optimal location as well as capacity level among the candidate inland cities.     

软土下卧倾斜硬层基坑变形规律及抗隆起稳定性*

受地质构造及地层沉积影响，实际地层分布并非完全水平。以软土下卧倾斜硬层基坑为研究对象，通过建立基坑土体非对称有限元模型，开展倾斜硬层斜面倾角、斜面与支挡结构距离对基坑变形及抗隆起稳定性的影响规律研究。结果表明：1）斜面倾角、斜面与支挡结构距离对基坑变形规律及安全系数存在显著影响。2）倾斜硬层造成基坑两侧软土不对称分布。土层厚度越小支挡结构受到的约束作用越大，该侧坑底隆起量、支挡结构变形、坑外地面沉降都小于土层厚度大的一侧。     

A proposed vision and vehicle-to-infrastructure communication-based vehicle positioning approach

It is essential to obtain accurate location of vehicles for new applications of Intelligent Transportation Systems. To remedy the defects of present Global Positioning System and vehicle-to-infrastructure (V-I) positioning technology, a new positioning approach based on vision and V-I communication is proposed. This approach aims at lane-level positioning with lower cost than conventional ones. In this approach, the position of the vehicle is represented by its lateral position (the lane number) and longitudinal position (the distance from entrance of the road) in a course coordinate system along the road; the specific lane the vehicle is occupying (the lane number) can be judged using the information of lane lines detected by vision systems; then the distance to the vehicle is obtained by a Road Side Unit (RSU) during the V-I communication; and the longitudinal position is calculated. The error of the approach on typical operating conditions is analyzed, indicating that the new approach can achieve the accuracy of less than 0.31 m for straight road and 0.58 m for typical arc road with ultra-wideband communication and ranging technologies and rational arrangement of RSUs. The feasibility of this approach is presented.     

Approximate optimal AUTOSAR software components deploying approach for automotive E/E system

The AUTOSAR has been developed as the worldwide standard for automotive E/E software systems, making the electronic components of different suppliers to be employed universally. However, as the number of component-based applications in modern automotive embedded systems grows rapidly and the hardware topology becomes increasingly complex, deploying such large number of components in automotive distributed system in manual way is over-dependent on experience of engineers which in turn is time consuming. Furthermore, the resource limitation and scheduling analysis make the problems more complex for developers to find out an approximate optimal deploying approach in system integration. In this paper, we propose a novel method to deploy the AUTOSAR components onto ECUs with the following features. First, a clustering algorithm is designed for deploying components automatically within relatively low time complexity. Second, a fitness function is designed to balance the ECUs load. The goal of our approach is to minimize the communication cost over all the runnable entities while meeting all corresponding timing constraints and balancing all the ECUs load. The experiment results show that our approach is efficient and has well performance by comparing with other existing methods in specific and synthetic data set.     

复杂地形条件下桥隧相连隧道洞口结构设计研究

蒙华铁路坪桥1号隧道进口洞顶基岩外凸、洞顶以下岩面高且直立、洞顶上部地形偏压高陡,地形条件极其复杂。营盘山大桥与坪桥1号隧道进口紧密相连,存在桥台与隧道洞门结构相互干扰以及边坡防护、隧道出洞和洞口场地布置等一系列难题,设计难度极大。为解决这些难题,通过对现场实际地形、地质情况进行研究,对比分析"整体式"与"分离式"桥隧相连结构的优缺点,提出桥台与隧道相结合的"整体式"桥隧相连结构方案;同时,针对地形偏压高陡,提出非对称结构设计方案,实现了隧道"零"仰坡出洞,解决了洞口边坡防护的难题;最后,提出架立临时贝雷梁的方案,解决了隧道出洞及洞口场地布置的难题。     

京津客运专线悬浇连续梁桥面平整度控制技术

结合京津客运专线悬臂浇筑连续梁的施工过程,介绍了主梁的整体线形及各节段间的接缝控制和桥面横向六面排水坡等平整度控制内容,对全桥合拢后桥面的平整度缺陷处理方法进行了阐述,对今后悬浇连续梁施工中的桥面平整度控制与处理有一定的借鉴作用。     

Apoptin原核表达载体的构建及在大肠杆菌中的表达

目的构建Apoptin的原核表达载体,并制备抗原物质Apoptin融合蛋白。方法在获得Apoptin融合基因的基础上,成功构建了Apoptin的高效原核表达载体pET-28a( )-Apoptin,将该质粒转化至大肠杆菌E.coliBL21(DE3)受体菌中,以IPTG对其进行诱导表达,聚丙烯酰胺凝胶电泳分析目的蛋白。结果转化有Apoptin的原核表达载体pET-28a( )-Apoptin的大肠杆菌E.coliBL21(DE3)经IPTG诱导后,经SDS-PAGE分析,在相对分子质量约17 000的位置出现目的蛋白条带,大小与Apoptin融合蛋白一致。结论Apoptin原核表达载体pET-28a( )-Apoptin能够表达出Apoptin融合蛋白,为进一步的Apoptin研究和制备Apoptin抗体奠定了基础。