Novel experimental strategy for high resolution AFM imaging of membrane-associated bacterial toxins

Bacterial pore-forming toxins （PFTs） are essential virulence factors of many human pathogens. Knowl- edge of their structure within the membrane is critical for an understanding of their function in pathogenesis and for the development of useful therapy. Atomic force microscopy （AFM） has often been employed to structurally interrogate many membrane proteins, including PFTs, owing to its ability to produce sub-nanometer resolution images of samples under aqueous solution. However, an absolute prerequisite for AFM studies is that the samples are single-layered and closely-packed, which is frequently challenging with PFTs. Here, using the prototypical member of the cholesterol-dependent cytolysin family of PFTs, perfringolysin O （PFO）, as a test sample, we have developed a simple, highly robust method that routinely produces clean, closely-packed samples across the entire specimen surface. In this approach, we first use a small Teflon well to prepare the supported lipid bilayer, remove the sample from the well, and then directly apply the proteins to the bilayer. For reasons that are not clear, bilayer preparation in the Teflon well is essential. We anticipate that this simple method will prove widely useful for the preparation of similar samples, and thereby enable AFM imaging of the greatest range of bacterial PFTs to the highest possible resolution.     

Robust control for four-wheel-independent-steering electric vehicle with steer-by-wire system

A four-wheel-independent-steering (4WIS) electric vehicle (EV) with steer-by-wire (SBW) system is proposed in this paper. The fast terminal sliding mode controller (FTSMC) is designed for the SBW system to suppress external disturbances. Taking unstructured and structured uncertainties into consideration, a robust controller is designed for the 4WIS EV utilizing μ synthesis approach and the controller order reduction is implemented based on Hankel-Norm approximation. Since sideslip angle is the feedback signal of robust controller and it is hard to measure, the extended Kalman filter (EKF) is employed to estimate sideslip angle. To evaluate the vehicle performance with the designed control system, step and sinusoidal steering maneuvers are simulated and analyzed. Simulation results show that the designed control system have good tracking ability, strong robust stability and good robust performance to improve vehicle stability and handing performance.     

A signal-based fault detection and classification method for heavy haul wagons

This paper proposes a signal-based fault detection and isolation (FDI) system for heavy haul wagons considering the special requirements of low cost and robustness. The sensor network of the proposed system consists of just two accelerometers mounted on the front left and rear right of the carbody. Seven fault indicators (FIs) are proposed based on the cross-correlation analyses of the sensor-collected acceleration signals. Bolster spring fault conditions are focused on in this paper, including two different levels (small faults and moderate faults) and two locations (faults in the left and right bolster springs of the first bogie). A fully detailed dynamic model of a typical 40t axle load heavy haul wagon is developed to evaluate the deterioration of dynamic behaviour under proposed fault conditions and demonstrate the detectability of the proposed FDI method. Even though the fault conditions considered in this paper did not deteriorate the wagon dynamic behaviour dramatically, the proposed FIs show great sensitivity to the bolster spring faults. The most effective and efficient FIs are chosen for fault detection and classification. Analysis results indicate that it is possible to detect changes in bolster stiffness of ±25% and identify the fault location.     

北京市商业区可达性研究

为建立商业区可达性计算方法,并为未来商业区的选址、设计提供参考,选取北京市较为典型的5个商业区为研究对象,对商业区的特点进行了分析。从理论上探讨了计算商业区可达性包含的4个因素：土地利用、交通系统、时间因素以及个体因素。借鉴潜能模型,提出了可达性理论模型,并给出具体的可达性计算公式。以北京市5个商业区中18个大中型商场为例,计算可达性以及各区域到达这些商业区的可达性分布。     

TNFα、Leptin-Rb、NF-κB和PPAR-γ在酒精性肝病大鼠肝细胞中的表达

目的 探讨TNFα、NF-κB、Leptin-Rb和PPAR-γ等在大鼠酒精性肝病中与肝组织炎症、坏死和纤维化的关系.方法 胃造瘘法建立长期大鼠酒精性肝病模型,分别在第4、8、12、24和52周用免疫组化、原位杂交和RT-PCR技术检测不同阶段大鼠肝组织中TNFα、NF-κB、PPAR-γ和Leptin-Rb等的表达.结果 TNFα、NF-κB和Leptin-Rb水平在模型组大鼠肝细胞中,第8周表达逐渐增强,第24周起高水平表达一直持续至52周(P<0.01).PPAR-γ在对照组和第4、8周模型组肝细胞中表达最强,第12周表达开始减弱.TNFα和NF-κB在肝细胞中的表达呈明显正相关关系,与PPAR-γ则呈负相关关系(P<0.01).结论 TNFα和NF-κB与肝细胞病变程度有很好的一致性关系,Leptin-Rb在肝细胞的表达与肝纤维化发展相一致,PPAR-γ则刚好相反.     

5-羟色胺转运体基因多态性和抑郁症的发病、性别、严重程度及自杀行为的相关性

目的探讨中国汉族人群5-羟色胺转运体启动区(5-HTTLPR)基因多态性和抑郁症的发病、性别、严重程度及自杀是否相关。方法应用聚合酶链式反应(PCR)扩增技术测定150例抑郁症患者和150例正常对照者的5-HT-TLPR基因型和等位基因,分别验证各种基因型与中、重度抑郁症发病、性别及自杀行为的相关性。结果病例组SS、LS基因型及S等位基因频率均高于对照组(26.0% vs.20.0%;52.7% vs.46.0%;52.3% vs.43.0%;P均<0.05);两组性别分层比较,女性S等位基因频率高于对照组(55.3% vs.43.6%,P<0.05);病例组严重程度分层比较差异无统计学意义(P>0.05);病例组有无自杀行为分层比较,有自杀行为患者SS基因型频率(37.3% vs.20.2%)及S等位基因频率(61.8% vs.47.5%)均高于无自杀行为患者(P<0.05);抑郁自杀组性别分层比较未显示显著性差异(P>0.05);抑郁自杀组病情程度分层比较,重度抑郁自杀者SS基因型频率(42.5% vs.18.2%)及S等位基因频率(68.7% vs.36.4%)均高于中度抑郁自杀者(P<0.05)。结论在中国汉族人群中,5-HTTLPR多态性和抑郁症相关。S等位基因可能是抑郁症的易感基因,特别是女性,SS型可能是抑郁症易感基因型;S等位基因可能是抑郁症患者自杀的危险基因,SS基因型人群可能是抑郁症患者自杀的危险人群,特别是携带S等位基因的重度抑郁症患者更易自杀。     

Singular perturbation composite control of a free-floating flexible dual-arm space robot

The Free-floating Flexible Dual-arm Space Robot is a highly nonlinear and coupled dynamics system. In this paper, the dynamic model is derived of a Free-floating Flexible Dual-arm Space Robot holding a rigid payload. Furthermore, according to the singular perturbation method, the system is separated into a slow subsystem representing rigid body motion of the robot and a fast subsystem representing the flexible link dynamics. For the slow subsystem, based on the second method of Lyapunov, using simple quantitative bounds on the model uncertainties, a robust tracking controller design is used during the trajectory tracking phase. The optimal control method is designed in the fast subsystem to guarantee the exponential stability. With the combination of the two above, the system can track the expected trajectory accurately, even though with uncertainty in model parameters, and its flexible vibration gets suppressed, too. Finally, some simulation tests have been conducted to verify the effectiveness of the proposed methods.     

分布电容对舰船电力系统接地方式选择的影响

本文主要讨论分布电容对舰船电力系统接地方式选择的影响,分析了舰船电力系统在高电阻接地和谐振接地的方式下分布电容对系统的影响,发现在中压系统中大分布电容的情况下,采用高电阻接地会产生超过有关标准的故障电流。在谐振接地的情况下,需要合理的配置消弧线圈来产生感性电流来抵消系统对地电容产生的容性残流。同时依据具体数据,利用高斯定理对电缆电容进行了估算,与实际结果相吻合。     

Joint user and antenna selection for multiuser MIMO downlink with block diagonalization

User selection is necessary for multiuser multiple-input multiple-output (MIMO) downlink systems with block diagonalization (BD) due to the limited free spatial transmit dimensions. The pure user selection algorithms can be improved by performing receive antenna selection (RAS) to increase sum rate. In this paper, a joint user and antenna selection algorithm, which performs user selection for sum rate maximization in the first stage and then performs antenna selection in the second stage, is proposed. The antenna selection process alternately drops one antenna with the poorest channel quality based on maximum determinant ranking (MDR) from the users selected during the first stage and activates one antenna with the maximum norm of projected channel from the remaining users. Simulation results show that the proposed algorithm significantly outperforms the algorithm only performing user selection as well as the algorithm combining user selection with MDR receive antenna selection in terms of sum rate.     

Compensation of pressure enthalpy effects on temperature fields for throttling of high-pressure real gas

For the pressure enthalpy of high pressure pneumatics, the computational fluid dynamics (CFD) simulation based on ideal gas assumption fails to obtain the real temperature information. Therefore, we propose a method to compensate the pressure enthalpy of throttling for CFD simulation based on ideal gas assumption. Firstly, the pressure enthalpy is calculated for the pressure range of 0.101 to 30 MPa and the temperature range of 190 to 298 K based on Soave-Redlich-Kwong (S-R-K) equation. Then, a polynomial fitting equation is applied to practical application in the above mentioned range. The basic idea of the compensation method is to convert the pressure enthalpy difference between inlet air and nodes into the compensation temperature. In the above temperature and pressure range, the compensated temperature is close to the real one, and the relative temperature drop error is below 10%. This error is mainly caused by the velocity difference of the orifice between the real and ideal gas models. Finally, this compensation method performs an icing analysis for practical high pressure slide pilot valve.