Performance evaluation of energy meters under nonlinear loads

Due to rapid advancements in power electronics, the utilization of electronically switched loads and nonlinear loads is increasing gradually in the electrical power system. These loads create problems of measuring instruments, when connected to the power distribution systems. In this paper, an experimental investigation has been carried out to analyze the performance of single-phase watt-hour (induction and electronic types) energy meters that are being used in Pakistan. The accuracy of the energy meters has been tested under different household nonlinear loads, at various power factors and also at different supply voltage levels. Power factor and total harmonic distortion (THD) of different household loads are also recorded in the experimental work. A hardware based experimental setup has been designed to perform the experimental work. The experimental results have been compared to Water and Power Development Authority (WAPDA) standards for energy meters.     

Adjusting the service? Understanding the factors affecting bus ridership over time at the route level in Montréal,Canada

Transportation - Like many cities across North America, Montréal has experienced shrinking bus ridership over recent years. Most literature has focused on the broader causes for ridership...     

Development of 19-plex Y STR system and polymorphism studies in Pakistani population

For the development of 19-plex Y STR system and polymorphism studies in locl ethnic populations sixteen markers of non-recombining regions (NRY) of Y chromosome, which show high power of discrimination among individuals, were selected in this study. Blood samples (600) were e.ollected from the males of three most common castes of Pakistani population (Arnin, Awan and Rajput) with different parent lineages. Three markers (DYS385a/b, DYS389Ⅰ/Ⅱ and YCAⅡa/b) among 16 Y STRs are double-targeted regions of the Y chromosome and thus provide two polymorphie peaks for each respective primer set. These 16 Y-STRs were developed into Megaplex system for simultaneous amplification of all markers within the population. The overall power of discrimination observed in focused populations was 60.5%, 66.5% and 55% in Rajput, Awan and Arain casts respectively. This discrimination power will be helpful in haman identification for forensic casework studies including sexual assaults and paternity testing.     

Discrete dynamic models for freeway incident detection systems

This paper considers the problem of freeway incident detection within the general framework of computer‐based freeway surveillance and control. A new approach to the detection of freeway traffic incidents is presented based on a discrete‐time stochastic model of the form ARIMA (0, 1, 3) that describes the dynamics of traffic occupancy observations. This approach utilizes real‐time estimates of the variability in traffic occupancies as detection thresholds, thus eliminating the need for threshold calibration and lessening the problem of false‐alarms. Because the moving average parameters of the ARIMA (0, 1, 3) model change over time, these parameters can be updated occasionally. The performance of the developed detection algorithm has been evaluated in terms of detection rate, false‐alarm rate, and average time‐lag to detection, using a total of 1692 minutes of occupancy observations recorded during 50 representative traffic incidents.     

非惯性坐标在列车纵向力分析中的运用

考虑车体与钩缓系统位移而造成的钩缓系统各部件间几何非线性特点,本文提出一种新的非线性列车车钩缓冲系统模型。忽略钩缓系统各部件惯性,将系统坐标分成惯性坐标和非惯性坐标:惯性坐标描述有惯性力作用其上的车体运动,与惯性力无关的非惯性坐标描述钩缓系统各部件的运动。在不增加状态方程数量、系统惯性坐标数量和约束方程数量的前提下,建立一个较为详细的钩缓系统模型,以体现系统各部件的运动自由度。本模型可在车体任意三维运动时捕捉钩缓系统各部位的运动自由度,而既有的简化钩缓系统模型则未能体现这一点。该方法还可避免由于过小质量的引入而带来系统微分方程组的刚性问题。最后,本文给出一个简化的列车模型算例来展示所述方法的运用。     

Rescuing the captive [mode] user: an alternative approach to transport market segmentation

The prevailing approach to transport market segmentation which identifies two distinct groups, “captive” and “choice” users, has widely been used by professionals and scholars despite the ambiguity associated with these terms. Furthermore, conflicting interpretations from the point of view of decision makers and individuals may result in negative policy implications where the needs of captive users are neglected in favour of attracting new users. This study attempts to address these concerns by proposing an alternative segmentation framework that could be applied to any mode of transport, in any regional context, by users and decision makers alike to better guide the development of transport policies. Using the results of a large-scale transportation survey, a series of clustering techniques are employed to derive this alternative approach for segmenting walkers, cyclists, transit and automobile users. The main factors considered in the final clustering analysis are the level of trip satisfaction and practicality. The analysis yielded four market segments: captivity, utilitarianism, dedication and convenience. Using this theoretical framework to understand the distribution of travellers among market segments is essential in identifying distinct and appropriate policy interventions to improve trip conditions. It is hoped that the segmentation approach and policy framework proposed here will encourage a better balance between pragmatic and idealistic goals in transportation policy.     

New evidence on walking distances to transit stops: identifying redundancies and gaps using variable service areas

The percentage of the population being served by a transit system in a metropolitan region is a key system performance measure but depends heavily on the definition of service area. Observing existing service areas can help identify transit system gaps and redundancies. In the public transit industry, buffers at 400 m (0.25 miles) around bus stops and 800 m (0.5 miles) around rail stations are commonly used to identify the area from which most transit users will access the system by foot. This study uses detailed OD survey information to generate service areas that define walking catchment areas around transit services in Montreal, Canada. The 85th percentile walking distance to bus transit service is found to be around 524 m for home-based trip origins, 1,259 m for home-based commuter rail trip origins. Yet these values are found to vary based on our analysis using two statistical models. Walking distances vary based on route and trip qualities (such as type of transit service, transfers and wait time), as well as personal, household, and neighbourhood characteristics. Accordingly, service areas around transit stations should vary based on the service offered and attributes of the people and places served. The generated service areas derived from the generalized statistical model are then used to identify gaps and redundancies at the system and route level using Montreal region as an example. This study can be of benefit to transport engineers and planners trying to maximize transit service coverage in a region while avoiding oversupply of service.     

The effect of neighbourhood characteristics,accessibility, home–work location,and demographics on commuting distances

The goal of this paper is to better understand home-to-work travel distances throughout the Montréal Metropolitan region. A simultaneous equation modelling analysis is carried out to jointly explain commuter trip length and home–work location as a function of neighbourhood typologies, commuter socio-demographics and measures of job and worker accessibility. First, a factor and cluster analysis of urban form is performed over the entire region on a fine-scale grid pattern. The outcome of this analysis is the classification of typologies at both home and job locations. Different measures of accessibility and commuter socio-demographics are then incorporated into the analysis. Varied data sources including a detailed Montréal Origin–Destination Survey on over 30,000 home-to-work automobile trips are analyzed. Among other results, commuters that live and work in a different sub-region almost double the average trip distance and although socio-economic factors have a statistically significant correlation with commuter distance, these factors have a marginal effect. Interestingly, our results highlight the importance of urban form and job accessibility. Deciding on whether to live and work in the same sub-region was modelled as an endogenous binary random utility model; unobserved heterogeneities seem to be simultaneously influencing both the home–work location choice and trip-to-work distances. Our results underscore the importance of home–work location with respect to urban form and job accessibility. Hence, policies that support more dense and mixed land-use in suburban areas would not be enough to reduce commuter distances. These actions should be accompanied by other policy initiatives to discourage long car trips.     

Experimental Investigation of a Hydraulic Turbine for Hydrokinetic Power Generation in Irrigation/Rainfall Channels

The development of microchannels with open flow for use in irrigation and rainy areas is challenged by electricity generation via hydrokinetic devices in shallo...