Wheel life prediction model – an alternative to the FASTSIM algorithm for RCF

In this article, a wheel life prediction model considering wear and rolling contact fatigue (RCF) is developed and applied to a heavy-haul locomotive. For wear calculations, a methodology based on Archard's wear calculation theory is used. The simulated wear depth is compared with profile measurements within 100,000?km. For RCF, a shakedown-based theory is applied locally, using the FaStrip algorithm to estimate the tangential stresses instead of FASTSIM. The differences between the two algorithms on damage prediction models are studied. The running distance between the two reprofiling due to RCF is estimated based on a Wöhler-like relationship developed from laboratory test results from the literature and the Palmgren-Miner rule. The simulated crack locations and their angles are compared with a five-year field study. Calculations to study the effects of electro-dynamic braking, track gauge, harder wheel material and the increase of axle load on the wheel life are also carried out.     

Existence of urban-scale macroscopic fundamental diagrams: Some experimental findings

A field experiment in Yokohama (Japan) reveals that a macroscopic fundamental diagram (MFD) linking space-mean flow, density and speed exists on a large urban area. The experiment used a combination of fixed detectors and floating vehicle probes as sensors. It was observed that when the somewhat chaotic scatter-plots of speed vs. density from individual fixed detectors were aggregated the scatter nearly disappeared and points grouped neatly along a smoothly declining curve. This evidence suggests, but does not prove, that an MFD exists for the complete network because the fixed detectors only measure conditions in their proximity, which may not represent the whole network. Therefore, the analysis was enriched with data from GPS-equipped taxis, which covered the entire network. The new data were filtered to ensure that only full-taxi trips (i.e., representative of automobile trips) were retained in the sample. The space-mean speeds and densities at different times-of-day were then estimated for the whole study area using relevant parts of the detector and taxi data sets. These estimates were still found to lie close to a smoothly declining curve with deviations smaller than those of individual links – and entirely explained by experimental error. The analysis also revealed a fixed relation between the space-mean flows on the whole network, which are easy to estimate given the existence of an MFD, and the trip completion rates, which dynamically measure accessibility.     

无车日活动公众参与的引导策略及信息传递

为了制定引导公众意识与行为转变的策略,尤其是对无车日的规划以及为将其应用于其他可持续性城市交通措施中提供指南.介绍了几种有关引导公众对于公共交通与其他可持续性交通方式的意识与行为转变的策略,重点介绍了公众目前与将来可以使用的可持续性交通方式,以及公众尤其是决策者对于城市交通问题的态度及其对于可持续性交通解决方案(如步行、骑自行车与使用公共交通工具等)的看法.最后,提出媒体是提高公众对于可持续性交通活动意识的有效渠道.     

Review of ship slamming loads and responses

The paper presents an overview of studies of slamming on ship structures. This work focuses on the hull slamming, which is one of the most important types of slamming problems to be considered in the ship design process and the assessment of the ship safety. There are three main research aspects related to the hull slamming phenomenon, a) where and how often a slamming event occurs, b) slamming load prediction and c) structural response due to slamming loads. The approaches used in each aspect are reviewed and commented, together with the presentation of some typical results. The methodology, which combines the seakeeping analysis and slamming load prediction, is discussed for the global analysis of the hull slamming of a ship in waves. Some physical phenomena during the slamming event are discussed also. Recommendations for the future research and developments are made.     

Traffic congestion and economic context: changes of spatiotemporal patterns of traffic travel times during crisis and post-crisis periods

Transportation - This paper aims to evaluate the impacts of the economic context on traffic congestion and its consequential effects on private vehicle accessibility. We conduct a long-term...     

Integrated population synthesis and workplace assignment using an efficient optimization-based person-household matching method

Transportation - Large scale activity-based simulation models inform a variety of transportation and planning policies using models that often rely on fixed or flexible workplace location in a...     

Factors Affecting Disaster Preparedness,Response, and Recovery Using the Community Capitals Framework

Abstract

Disaster research often focuses on how and why communities are affected by a discrete extreme event. We used the community capitals framework to understand how community characteristics influence their preparedness, response to, and recovery from successive or multiple disasters using the 1964 Good Friday Earthquake and the 1989 Exxon Valdez Oil Spill as case studies. This study assesses community response to these disasters by reviewing published literature on impacts to create profiles for six communities and by identifying community capitals before and during these disasters, and throughout the long-term recovery. While the presence of rich natural capitals commonly contributed resources to pre-disaster planning and long-term recovery, restriction of resource access immediately following the disasters was detrimental to many communities. Communities with strong political, social, and financial capitals tended to fare better immediately following disasters, enabling longer-term processes of transformation or recovery. However, in some communities the oil spill undermined these capitals more than the earthquake and resulting tsunami. In understanding how use and reliance on community capitals can lead to varied recovery success from different kinds of disasters, these findings can help coastal managers and planners prepare for future disasters.     

An experimental investigation by towing tank on VIV of a long flexible cylinder for deepwater riser application

In this study, the dynamic response of a vertical flexible cylinder vibrating at low mode numbers with combined x?y motion was investigated in a towing tank. The uniform flow was simulated by towing the flexible cylinder along the tank in still water; therefore, the turbulence intensity of the free flow was negligible in obtaining more reliable results. A lower branch of dominant frequencies with micro vibration amplitude was found in both cross-flow and in-line directions. This justifiable discrepancy was likely caused by an initial lock-in. The maximum attainable amplitude, modal analysis and x?y trajectory in cross-flow and in-line directions are reported here and compared with previous literature, along with some good agreements and different observations that were obtained from the study. Drag and lift coefficients are also evaluated by making use of a generalized integral transform technique approach, yielding an alternative method to study fluid force acting upon a flexible cylinder.     

Workshop 2: Bus rapid transit as part of enhanced service provision

Workshop 2 focused on the role of BRT as part of enhanced public transport service provision. Discussion topics included case studies around the world; improved performance and operations; and better contracts, institutional settings and enhanced policies. BRT was identified as a vital component of modern public transport systems due to its ability to provide high performance and rapid implementation at a lower cost than comparable rail transit. The participants concluded that on top of improving trunk transit corridors, it is important to look to the first and last kilometers and the connections among transport modes. In addition, it is important to consider all dimensions, not just the technical issues. The workshop identified the desirable ingredients for BRT success, created a table of bus based options for different applications and a list of research topics.     

LUTI operational models review based on the proposition of an a priori ALUTI conceptual model

ABSTRACT

This paper focuses on understanding to what extent the components of LUTI models and their mutual interactions are conceptually represented by eight operational LUTI models. This is important for the understanding of LUTI models’ mechanisms, firstly because it may reduce communication barriers between planning communities, secondly because it may help us understand the models’ applicability, and thirdly it may highlight the models’ shortcomings and point for future research. We present a discussion about what subsystems should be considered for LUTI modelling, from which we derived an “a priori” conceptual ALUTI model (incorporating Activities, besides Land Use and Transport). By comparing the rationale behind each model with this conceptual model, we establish the basis for our review, focussing on whether these models incorporate the ALUTI components, its inner workings and the relationships between these components. Results indicate three main limitations of the reviewed models. First, models not always adequately include all the components of the a priori ALUTI model. Second, the ALUTI subsystems’ internal functions are not explicitly modelled in several of the models reviewed, making it difficult to evaluate how planning decisions affect the subsystem. Third, only few models recognise all mutual interactions, especially in respect to the Activity subsystem.