Numerical Study for Brake Squeal by Machining Patterns on Frictional Surface

Automotive brake noise has become a stubborn problem as automotive cars achieve higher driving torques, since that the increased torque induces the generation of severe noise dissipation during brake operation. Moreover, the global brake tuning market for achieving higher performance of the vehicle has expanded recently. The need to control the noise grows more in this connection. The tuning brake kits have employed cross-drilled and slotted machining pattern on the surface of the rotor. These designs have advantages to improve air ventilation, temperature control, and surface cleaning of brake pad. However, the effects of modal frequency by patterned rotor surfaces are rarely discussed, even if it is highly related with brake squeal phenomenon. Therefore, this study deals with the relationship between patterned surfaces and brake squeal through the numerical methods. The commercial software of a finite element analysis is employed for calculation by varying geometric design factors of each rotor pattern. As a result, the cross-drilled machining patterns are concluded to be an influential factor for in-plane mode frequency while the slotted patterns have more leverage for out-of-plane mode frequency.     

考虑浮体弹性变形的锚泊系统分析方法

传统的锚泊系统分析方法一般是假设结构物为刚性不可变形的,这种假设对于常规海洋结构物的锚泊系统分析,其精度是可以接受的,然而对于弹性体(比如超大型浮体)来说,这种浮体刚性的假设显然是不合理的.本文基于摄动理论,分别给出了锚泊浮体(同时包括弹性体和刚性体)和锚泊系统的一阶运动方程.分别用三维水弹性理论和Goodman-Iance法求解浮体的动力响应和锚泊线的运动,并给出了两者之间的协调关系.通过数值算例分析表明,对于超大型浮体,其弹性特性对锚泊系统特性的影响是不可忽略的.     

软质岩路堑高边坡防护工程-预应力锚索的施工

针对平阿高速公路第五合同段路堑高边坡工程地质条件,介绍了预应力锚索的施工工艺,对今后类似地质条件的边坡施工具有广泛的指导意义.     

预应力混凝土梁桥拓宽关键技术研究

针对沪宁高速公路扩建工程桥梁拓宽工程中,桥梁横向拓宽所遇到的关键工程技术难题,如拓宽方案、横向拼接结构设计、结构变形和沉降控制方法等若干内容进行理论分析和试验研究．研究成果为设计和施工提供了有力的技术支持,保证了沪宁高速公路扩建桥梁拓宽的施工质量。     

Hydro- and aerodynamic analysis for the design of a sailing yacht

The results of the design analysis for a sailing yacht’s hull and sails are reported. The results were used to confirm the design of a 30 ft long sloop, which was planned, designed, and built in Korea for the first time in history. Flows around a sailing yacht above and under the free surface were analyzed separately using both computational and experimental methods. For the underwater flow analysis, turbulent flow simulations with and without free surface wave effects were carried out for the canoe hull with keel/rudder. The computed drag and side forces on the hull model were compared with the measurement data obtained from the towing tank experiments. In order to assess the sail performance, another set of computations was carried out for the flow around a sail system composed of main and jib sails with a mast. The present study demonstrates that, for the design analysis of a sailing yacht, computational fluid dynamics techniques can be utilized with a reasonable level of confidence.     

A study of fatigue crack propagation at a web stiffener on a longitudinal stiffener

Predicting fatigue crack growth after its detection during in-service inspection is necessary to prevent a loss of serviceability, such as the oil and/or water tightness of critical compartments. This paper focuses on the most typical fatigue cracks that start at the weld joint between a flat bar stiffener on a transverse web frame and the flange of a longitudinal stiffener on a bottom plate or inner bottom plate. An experiment is carried out to observe the fatigue crack propagation for two kinds of flat bars at the abovementioned connection. The experimental results, especially the surface crack growth on the flange (which dominates during the total fatigue life of the longitudinal stiffener), are compared with crack growth curves predicted using a few existing formulas. Based on the comparative study, a formula that shows the best agreement with the experiment results is selected. Weld toe magnification factors for the web stiffener are computed from the crack propagation rates measured in the experiment, and two equations for the magnification factors versus crack depth are developed for two types of web stiffeners. The selected existing formula and the proposed equations are applied to two connections at the inner bottom and side longitudinal bulkhead of an LNG carrier. The equivalent stress approach based on a long-term distribution is employed to avoid the complexity involved in dealing with the actual stress history. Using this prediction, the remaining service life until an oil or water leakage occurs at a tank boundary can be estimated when a fatigue crack at the connection is detected.