Tool sequence optimization based on three logical modes of robot control via CPLEX optimization

Cluster tools have advantages of shorter cycle times, faster process development, and better yield for less contamination. The sequence of dual-arm cluster tools is a complex logistics process during the semiconductor production. Efficient use of cluster tools is naturally very significant to competitive fab operations. Generating an optimized sequence in a computationally efficient manner and assessing the quality of the requirements to improve the fab production are the key factors for semiconductor manufacturing productivity. The Petri net modeling is introduced to minimize the makespan of the process for the three different logical modes and select a better mode after comparing the makespan among the three logical modes. The tool sequence optimization problem is formulated as optimization firing transition sequences based on the Petri net and then the formulation is converted to be linearly solved by the branch-and-cut method in the standard commercial solver CPLEX. Special methods for the linear conversion are highlighted. Due to the limited calculation time requirement for the real production and the large scale of the problem, special methods for the efficiency tuning are applied according to the characteristics of the problem. Numerical testing is supported by one of the most advanced semiconductor enterprises and the computational results show significant improvement compared with the traditional manual sequence results.     

Poisson noise removal based on nonlocal total variation with Euler’s elastica pre-processing

An enhancement-based Poisson denoising method for photon-limited images is presented. The noisy image is firstly pre-processed for enhancing incomplete object information, and then it is denoised while preserving the restored structural details. A variational regularization model based on Euler’s elastica (EE) is proposed for image enhancement pre-processing. A nonlocal total variation (NLTV) regularization model is then employed in the second stage of image denoising. The above two optimization problems are solved by the alternating direction method of multipliers (ADMM). For Poissonian images with low image peak values, experiments demonstrate the validity and efficiency of the proposed method for both restoring geometric structure and removing noise.     

Semiparametric specification of the utility function in a travel mode choice model

We propose a semiparametric approach that can capture the nonlinearity of deterministic components of the utility functions in discrete choice models and demonstrate it by analyzing travel mode choice behaviour for an interregional trip. The proposed smoothing spline-based specification method can be used to make ex ante evaluations regarding the parametric specifications of the deterministic utility functions in discrete choice models.     

Effective method for knock signal denoising in internal combustion engine

Uncontrolled expansion of combustion wave in spark ignited internal combustion engine causes knock effect which seriously degrades efficiency and lifetime of the engine. Thus, accurate knock detection and control are essential for obtaining a desired performance from the engine. Usually, knock sensor is used to detect this phenomenon but it has limited accuracy especially at engine high-speed rotations because of natural vibration and external noises. In this study an effective method based on Non-Local Mean (NLM) algorithm has been proposed to improve the knock detection accuracy. This method is evaluated based on four different indicators and four engine cylinders. The results show 52.9 % improvement in knock detection. Also feasibility of real time execution of this method based on embedded hardware has been studied.     

Origin–destination table disaggregation using biproportional least squares estimation

This paper describes a group of techniques for disaggregating origin–destination tables for travel forecasting that makes explicit use of observed traffic on a network. Five models within the group are presented, each of which uses nonlinear least-squares estimation to obtain row and column factors for splitting trip totals from and to larger geographical areas into smaller ones. The techniques are philosophically similar to Fratar factoring, although the solution method is quite different. The techniques are tested on a full-sized network for Northfield, MN and are found to work effectively.     

Influence of temperature on the tyre rolling resistance

Temperature is a very important factor controlling rolling resistance of road vehicle tyres. There are at least three different temperatures that may be considered as important factors controlling thermal conditions of the rolling tyre. The most common measure of the thermal conditions during tyre rolling is ambient air temperature. The other two are: pavement temperature and “tyre” temperature. Tyre temperature is the most difficult to establish, as temperatures of different parts of rolling tyres differ considerably, thus there is a problem to obtain representative values. In the authors’ opinion, air temperature is the most universal and reliable parameter to measure. The article presents results obtained in the Technical University of Gdańsk during laboratory and road measurements of different car tyres rolling on different pavements. The knowledge of rolling resistance characteristics is important for modelling car dynamics as well as fuel consumption. It is also necessary to establish proper test conditions in the future standardized on-road method of measuring rolling resistance. The results indicate that generally each tyre and pavement combination is influenced by the air temperature in a unique way, but at the same it is possible to propose some general influence factors that may be used to normalize measurements to the standard temperature of 25 °C.     

Wave propagation in head on bonnet impact: Material and design issues

Head on bonnet impact is becoming more and more important in automotive design as regulations on pedestrian safety become more demanding. Despite the relatively low amount of energy involved, these impacts are truly dynamic phenomena as the event duration is comparable with the traveling time of the different wavefronts generated by the impact. In this paper, we show that we can build up a simplified model for the impact based on wave propagation analysis. Using this model, we can analyze head acceleration on existing bonnets or predict it on new ones. Head acceleration in a bonnet impact can thus be estimated over the whole area of the bonnet with a few minutes of CPU.     

Review of Secure Communication Approaches for In-Vehicle Network

In the connected vehicles, connecting interfaces bring threats to the vehicles and they can be hacked to impact the vehicles and drivers. Compared with traditional vehicles, connected vehicles require more information transfer. Sensor signals and critical data must be protected to ensure the cyber security of connected vehicles. The communications among ECUs, sensors, and gateways are connected by in-vehicle networks. This paper discussed the state-of-art techniques about secure communication for in-vehicle networks. First, the related concepts in automotive secure communication have been provided. Then we have compared and contrasted existing approaches for secure communication. We have analyzed the advantages/disadvantages of MAC and digital signatures for message authentication and compared the performance and limitations of different cryptographic algorithms. Firewall and intrusion detection system are introduced to protect the networks. The constraints and features of different intrusion detection approaches are presented. After that, the technical requirements for cryptographic mechanism and intrusion detection policy are concluded. Based on the review of current researches, the future development directions of the automotive network security have been discussed. The purpose of this paper is to review current techniques on automotive secure communication and suggest suitable secure approaches to implement on the in-vehicle networks.     

Calculation of strain amplification matrix for strain invariant failure theory based on representative volume element models with periodical boundary condition

Strain invariant failure theory (SIFT) is a micro-mechanics-based failure theory for multi-scale failure analysis of composite materials originally proposed by Gosse and Christensen. In this paper, the approach for obtaining strain amplification matrix which is a key step for the execution of SIFT is improved by adopting representative volume element (RVE) finite element models considering periodical boundary condition, based on which more actual deformation mode is reflected. The deformation modes and strain data at the characteristic points of the centroid cell of multi-cell RVE model are analyzed and taken as a reference. It can be concluded that more reasonable deformation mode and relationship between the micro-mechanical and macro-mechanical strain states are obtained by employing the new model. Finally, numerical examples are provided to illustrate the determination of strain amplification factors within the RVEs considering periodical boundary condition at the characteristic points.     

Systematic budget allocation for transportation construction projects: a case in Taiwan

It has always been a daunting task for any government to allocate the budgets for public infrastructure effectively so as to maximize the benefits of the limited resources. The most important contribution this paper makes is to conduct an empirical study of the budget allocations of the six region-based road system construction plans in northern Taiwan using the transportation budget allocation model devised in this paper. After reviewing the results, the experts consulted while preparing this paper believe that these results are both objective and able to meet the actual requirements. The competent authority also believes that they are better than those obtained using their original approach. In particular, the construction of this model takes into consideration the highest-level supervisors. To a certain degree, it caters for the practices in budget allocation so that the managers are able to assume the authority corresponding to their responsibility concerning management efficiency and final outcomes.