Modeling and control strategy development of a parallel hybrid electric bus

This paper presents the system modeling, control strategy design, and experiment validation of a parallel hybrid electric bus with an automatic manual transmission (AMT) and a dry clutch. The mathematical model representation and the system architecture of the powertrain are first described. Next, a complete control scheme including energy management strategy and coordinated control of the AMT and the clutch is presented. The controller and powertrain models are then integrated in a way that the power management and the hybrid driveline perform in real world. The analysis and validation through model simulation and comparison with experiment data are conducted. A good agreement between the model and experiment demonstrates the efficacy and credibility of the integrated model. The integrated model is employed in both simulation and bench-test assessments for the development of a hybrid control unit. The results indicate that the model-based design methodology is beneficial to systematically analyzing and understanding the dynamics of hybrid electric powertrain.     

Research on the high-speed railway catenary systems online real-time testingEI北大核心

Research purposes: Some catenary system vibrated largely after the train since Chinese high-speed railway running, which came from an oral report of one rail worker on duty. Its accurate displacement must be measured in order to solve the problem. The measurement technique based on image has the advantages of non-contact and dynamic which is suitable for unique structure such as catenary system. The computer gets displacement value through analyzing image which may ensure train's safety when on-line test is carrying out. The research not only can be used to analyze the cause of abnormal existing catenary shaking and swaying amplitude, but also can provide the technical support for catenary of electrified railway online real-time test. Research conclusions: (1) The measured amplitude of cantilever, shoulder brace of positive feeder and carrier cable was small relatively and consistent with other normal sections of the whole line. (2) The interaction between catenary and pantograph was the main reason for its vibration, without the coupling effect between up-bound and down-bound. (3) The accurate value of test result indicated that the amplitude of catenary is under the range allowably, which verified the uncertainty of human sense and further clarified the safety hazard. (4) The non-contact measurement technique based on image can get the dynamic real time test data and have simple and convenient operation, which supplies subtle and suitable way for high-speed railway catenary systems real-time on-line test.     

TBM掘进数据标准化预处理方法研究北大核心CSCD

TBM信息化采集了海量数据,对TBM数据的标准化预处理是进行诸多研究的前提。基于此,提出了一种TBM掘进数据标准化处理方法,依托TBM现场施工掘进大数据,以破岩特征为依据选取基本掘进参数(刀盘转速、推进速度、刀盘推力及刀盘扭矩)分析掘进过程TBM数据特点,提出循环掘进过程空推段、上升段、稳定段及下降段起点的判别方法,对稳定段起点提出了标准差法判别方法、均值判别方法、直方图判别方法,满足实时和非实时的数据划分需求。最后对两个TBM工程的数据进行标准化预处理,实现施工大数据的标准化。结果表明,提出的标准化预处理方法可实现循环掘进过程数据的有效划分。研究成果可推广应用于众多TBM工程的数据标准化处理,有效实现机器学习数据库的建立。     

ZS6900EV纯电动城市公交客车

文章主要介绍了ZS6900EV纯电动城市公交客车的结构参数、动力性能及其基本工作原理、主要部件和测试结果.     

Modal Controllers for Active Steering of Railway Vehicles with Solid Axle Wheelsets

This paper presents the development of a modal control strategy for the active steering of solid axle railway vehicles and reveals benefits of actively stabilising the wheelsets of a railway vehicle. A modal decomposition is applied to a 2-axle railway vehicle to de-couple its body lateral and yaw motions and hence to allow more detailed analysis of the vehicle behaviour and more robust design of active controllers. Independent controllers for the two motions are developed based on the two de-coupled modes. Parameter variations such as creep coefficients and wheelset conicity are taken into account in the design process to guarantee a robust design. The study shows that, compared to a passive vehicle, the vehicles with actively steered wheelsets not only perform much better on a curved track, but also improve the ride quality on straight track. Computer simulations are used in the study to verify the development of the controllers and assess the system performance with the control scheme proposed.     

New methodology for fast prediction of wheel wear evolution

In railway applications wear prediction in the wheel–rail interface is a fundamental matter in order to study problems such as wheel lifespan and the evolution of vehicle dynamic characteristic with time. However, one of the principal drawbacks of the existing methodologies for calculating the wear evolution is the computational cost. This paper proposes a new wear prediction methodology with a reduced computational cost. This methodology is based on two main steps: the first one is the substitution of the calculations over the whole network by the calculation of the contact conditions in certain characteristic point from whose result the wheel wear evolution can be inferred. The second one is the substitution of the dynamic calculation (time integration calculations) by the quasi-static calculation (the solution of the quasi-static situation of a vehicle at a certain point which is the same that neglecting the acceleration terms in the dynamic equations). These simplifications allow a significant reduction of computational cost to be obtained while maintaining an acceptable level of accuracy (error order of 5–10%). Several case studies are analysed along the paper with the objective of assessing the proposed methodology. The results obtained in the case studies allow concluding that the proposed methodology is valid for an arbitrary vehicle running through an arbitrary track layout.     

Adaptive control of the shifting process in automatic transmissions

This paper focuses on the way of keeping shift quality of automatic transmissions consistent in mass production and with mileage accumulation. We investigate the main factors influencing the consistency of shift quality. Test results show that the torque to pressure (T2P) and pressure to current (P2I) characteristics of shifting elements are easily affected. A simulation model of an 8-speed automatic transmission is established to simulate the dynamic process of clutch-to-clutch shift. Simulation results demonstrate that the change of T2P and P2I characteristics has a significant influence on shift quality. In order to compensate for the influences, we develop two adaptive control strategies, i.e., the adaptive control strategies for torque phase and inertia phase. They make use of the measured speed information and time information to evaluate shift quality. Then the control parameters are tuned to adapt to the change of T2P and P2I characteristics. Vehicle tests verify that the developed adaptive control strategies are effective to keep shift quality consistent in mass production and with mileage accumulation.     

Modeling design of military equipment operational concepts by MBSE北大核心CSCD

［Objectives］In order to give full play to role of "operational concepts" in the engineering process of military equipment development, it is necessary to understand and form standardized operational concept documents (OCD), and study the modeling design of OCD in order to implement the transformation of the system engineering process from document-centric to model-centric. ［Methods］This study analyzes the US military's definition of operational concepts and introduces its hierarchical operational concepts, especially the bottom level ConOps or OpsCon, usually as a part of equipment acquisition and requirement engineering. Lessons are then drawn from the relevant theories and standards such as IEEE 29148:2018 and ANSI/AIAA G-043B-2018 of the operational concepts document outline in order to design the specifications of the OCD. Finally, key technologies are studied, including SysML-based OpsCon modeling, UML Profile-based OpsCon framework design and MSDL/C-BML-based operational scenario development.［Result］The results indicate the effectiveness of implementing the modeling design of OCDs. ［Conclusions］In the process of equipment requirement engineering, the results of this study can help to improve the efficiency of equipment requirement demonstration through an ambiguous operational concept model and an engineering environment for all stakeholders of the system. © 2022 Journal of Clinical Hepatology. All rights reserved.     

High-Speed Rail Operations on an Existing Network: An Assessment Model for China

High-speed rail operations have the potential to reduce the long-term decline in rail passenger travel demand for the medium to long distance inter-urban markets. Such decline has been evident through most of the industrialized countries where air and road transport tend to be the dominant modes. In China, the operations of long distance high-speed rail on fully dedicated track is not very easy to implement, due to the high proportion of passengers who travel between high-speed and conventional railways. An alternative approach would be to allow for mixed operations with trains of various speeds on the same track. This article puts forward a simulation model designed to allow an evaluation of the most efficient distance for high-speed rail operations under mixed train speed scenarios. The model takes into account the main operating parameters such as passenger volumes, train speeds, capital and maintenance costs, train operating costs and energy consumption. The distance of high-speed train running on conventional rail that will yield the most economic benefit can be estimated using the model. The article includes the results of using the model for a specific example. It is concluded that large-scale high-speed trains have the potential to be successfully operated on conventional rail networks.