Numerical simulation on truncated oval-nosed projectile penetrating into stiffened plate北大核心CSCD

[Objectives]In this paper, the numerical simulation method is used to study the anti-penetration performance and energy absorption mode of a stiffened plate, as well as the influence of different stiffened bars on the flight attitude of the projectile body.[Methods] Finite element software LS-DYNA is used to simulate the process of a truncated oval-nosed projectile penetrating a stiffened plate, and the results of the numerical simulation are compared with an experiment to verify the reliability of the numerical simulation method. The momentum method and mass equivalence method are used to predict the residual velocity of the projectile, and the applicability of different theoretical methods within different velocity ranges is compared. The deformation energy of different regions of the stiffened plate is then extracted to analyze the influence of the initial velocity of the projectile body on the energy absorption mode of the target plate. Finally, the structure of the stiffeners is changed and the influence of the relative position of the stiffeners on the penetration attitude of the projectile body is analyzed.[Results]The results show that the mass equivalence method is more accurate than the momentum method in predicting the residual velocity of the stiffened plate when the initial velocity of the projectile body is in the range of 300–900 m/s. The ratio of the deformation energy of the stiffened plate to the energy loss of the projectile body decreases with the increase of the initial velocity of the projectile body. The effect of a T-stiffened plate on trajectory is greater than that of a rectangular-stiffened plate.[Conclusions]The related calculation method and research results have certain reference value for research and engineering application surrounding the anti-penetration of stiffened plates. © 2023 Chinese Journal of Ship Research. All rights reserved.     

Modelling sequential ticket booking choices during Chinese New Year

Transportation - Transport systems in China face extreme capacity shortages during the Spring Festival travel season. This study therefore explores traveler’s decision making behavior when...     

The Gini index of demand imbalances in public transport

Transportation - The paper studies a general bidirectional public transport line along which demand varies by line section. The length of line sections also varies, and therefore their contribution...     

A critical appraisal of the use of simple time-money trade-offs for appraisal value of travel time measures

Transportation - Stated choice surveys have established themselves as the preferred approach for value of travel time elicitation with the help of choice models. However, major differences exist in...     

Commodity flow estimation for a metropolitan scale freight modeling system: supplier selection considering distribution channel using an error component logit mixture model

Freight forecasting models have been significantly improved in recent years, especially in the field of goods vehicle behavior modeling. On the other hand, the improvements to commodity flow modeling, which provide inputs for goods vehicle simulations, were limited. Contributing to this component in urban freight modeling systems, we propose an error component logit mixture model for matching a receiver to a supplier that considers two-layers in supplier selection: distribution channels and specific suppliers. The distribution channel is an important element in freight modeling, as the type of distribution channel is relevant to various aspects of shipments and vehicle trips. The model is estimated using the data from the Tokyo Metropolitan Freight Survey. We demonstrate how typical establishment survey data (i.e. establishment and outbound shipment records) can be used to develop the model. The model captures the correlation structure of potential suppliers defined by business function and provides insights on the differences in the supplier choice by distribution channel. The reproducibility tests confirm the validity of the proposed approach, which is currently integrated into a metropolitan-scale agent-based freight modeling system, for practical use.

     

Improving the coexistence of offshore wind farms and shipping: an international comparison of navigational risk assessment processes

The continued growth and evolution of the offshore wind industry, and the emergence of other novel marine uses such as wave and tidal generators, have upped the ante for spatial planners, as well as consenting and approval authorities in various coastal states. These stakeholders rely on processes such as navigational risk assessments (NRAs) to balance safety and efficiency requirements and to make optimal decisions over use of space. Given the increasingly complex and crowded seascape, however, there are some apprehensions about potential shortcomings in these NRA processes. There is also some concern that these inadequacies may lead to unsafe or inefficient marine spatial use. To understand how NRA processes can be improved further, a literature review is conducted, followed by a survey of respondents who are involved in the planning, consenting and/or approval of offshore wind farms across seven different countries. A summary of the NRA processes in these seven countries is presented, and several shortcomings are identified. Based on the findings of the survey, a list of recommendations is presented to enhance existing NRA processes—and to improve the coexistence of shipping and offshore wind farms (OWFs).     

TRANSCRIPTION ACTIVATION BY HBV PRE SI PROTEIN

ＴＲＡＮＳＣＲＩＰＴＩＯＮＡＣＴＩＶＡＴＩＯＮＢＹＨＢＶＰＲＥＳＩＰＲＯＴＥＩＮＸｉａｏＳｈｅｎｇｘｉａｎｇ；Ｔ．Ｓ．Ｂ．Ｙｅｎ（ＬａｂｏｒａｔｏｒｙｏｆＭｏｌｅｃｕｌａｒＰａｔｈｏｌｏｇｙ，ＤｅｐａｒｔｍｅｎｔｏｆＰａｔｈｏｌｏｇｙ，Ｕｎｉｖ．ｏｆ...     

A simulation-based probabilistic design method for arctic sea transport systems

When designing an arctic cargo ship, it is necessary to consider multiple stochastic factors. This paper evaluates the merits of a simulation-based probabilistic design method specifically developed to deal with this challenge. The outcome of the paper indicates that the incorporation of simulations and probabilistic design parameters into the design process enables more informed design decisions. For instance, it enables the assessment of the stochastic transport capacity of an arctic ship, as well as of its long-term ice exposure that can be used to determine an appropriate level of ice-strengthening. The outcome of the paper also indicates that significant gains in transport system cost-efficiency can be obtained by extending the boundaries of the design task beyond the individual vessel. In the case of industrial shipping, this allows for instance the consideration of port-based cargo storage facilities allowing for temporary shortages in transport capacity and thus a reduction in the required fleet size / ship capacity.     

Influence of wheel and rail profile shape on the initiation of rolling contact fatigue cracks at high axle loads

The influence of wheel and rail profile shape features on the initiation of rolling contact fatigue (RCF) cracks is evaluated based on the results of multi-body vehicle dynamics simulations. The damage index and surface fatigue index are used as two damage parameters to assess the influence of the different features. The damage parameters showed good agreement to one another and to in-field observations. The wheel and rail profile shape features showed a correlation to the predicted RCF damage. The RCF damage proved to be most sensitive to the position of hollow wear and thus bogie tracking. RCF initiation and crack growth can be reduced by eliminating unwanted shape features through maintenance and design and by improving bogie tracking.     

On the implementation of an auxiliary pantograph for speed increase on existing lines

The contact between pantograph and catenary at high speeds suffers from high dynamic contact force variation due to stiffness variations and wave propagation. To increase operational speed on an existing catenary system, especially for soft catenary systems, technical upgrading is usually necessary. Therefore, it is desirable to explore a more practical and cost-saving method to increase the operational speed. Based on a 3D pantograph–catenary finite element model, a parametric study on two-pantograph operation with short spacing distances at high speeds shows that, although the performance of the leading pantograph gets deteriorated, the trailing pantograph feels an improvement if pantographs are spaced at a proper distance. Then, two main positive effects, which can cause the improvement, are addressed. Based on a discussion on wear mechanisms, this paper suggests to use the leading pantograph as an auxiliary pantograph, which does not conduct any electric current, to minimise additional wear caused by the leading pantograph. To help implementation and achieve further improvement under this working condition, this paper investigates cases with optimised uplift force on the leading pantograph and with system parameter deviations. The results show that the two positive effects still remain even with some system parameter deviations. About 30% of speed increase should be possibly achieved still sustaining a good dynamic performance with help of the optimised uplift force.