列车联运网络建设的重要性

概述了欧洲几个国家列车联运网络的建设情况,指出在提高列车运行速度的同时,应提供优质的联运服务。     

Modification of the Highway Capacity Manual two‐lane highway analysis procedure for Spanish conditions

The US Highway Capacity Manual (HCM) methodology is used in Spain to evaluate traffic operation and quality of service. The effect of passing manoeuvre on two‐lane highway operational performance is considered through adjustment factors to average travel speeds and percent time spent following. The procedure is largely based on simulations in TWOPAS and passing behaviours observed during US calibrations in the 1970s. It is not clear whether US driving behaviour and vehicles' performance are comparable with Spanish conditions. The objective of this research is to adapt the HCM 2010 methodology to Spanish driver behaviour, for base conditions (i.e. no passing restrictions). To do so, TWOPAS was calibrated and validated based on current Spanish passing field data. The calibration used a genetic algorithm. The case study included an ideal two‐lane highway with varying directional traffic flow rate, directional split and percentage of trucks. The updated methodology for base conditions is simpler than the current HCM 2010 and does not rely on interpolation from tables. Copyright © 2016 John Wiley & Sons, Ltd.     

How to Write a Literature Review Paper?

This paper discusses the question about how to write a literature review paper (LRP). It stresses the primary importance of adding value, rather than only providing an overview, and it then discusses some of the reasons for (or not) actually writing an LRP, including issues relating to the nature and scope of the paper. It also presents different types of LRPs, advises on reporting the methodology used for the selection of papers for review, and the structure of an LRP. An important conclusion is that the heterogeneity in LRPs is very large. This paper also presents some of the aspects that the authors feel are important structural and contextual considerations that help produce high-quality review papers.     

Extending stated choice analysis to recognise agent-specific attribute endogeneity in bilateral group negotiation and choice: a think piece

This paper is a think piece on variations in the structure of stated preference studies when modelling the joint preferences of interacting agents who have the power to influence the attribute levels on offer. The approach proposed is an extension of standard stated choice methods, known as ‘stated endogenous attribute level’ (SEAL) analysis. It allows for interactive agents to adjust attribute levels off a base stated choice specification that are within their control, in an effort to reach agreement in an experimental setting. This accomplishes three goals: (1) the ability to place respondents in an environment that more closely matches interactive settings in which some attribute levels are endogenous to a specific agent, should the modeller wish to capture such behaviour; (2) the improved ability of the modeller to capture the behaviour in such settings, including a greater wealth of information on the related interaction processes, rather than simply outcomes; and (3) the expansion of the set of situations that the modeller can investigate using experimental data.

Comparing operator and users costs of light rail, heavy rail and bus rapid transit over a radial public transport network

A model to compare three alternative forms of public transport - light rail, heavy rail and bus rapid transit - is developed for an urban network with radial lines emanating from the borders to the city centre. The theoretical framework assumes an operation aimed at minimising the total cost associated with public transport service provision, which encompasses both operator and users costs. The decision variables are the number of lines (network density) and the frequency per period for each mode. This approach has no prejudices a priori in respect of whether a specified delivery scenario is aligned with existing modal reputation. Rather, we establish the conditions under which a specific transit mode should be preferred to another in terms of the operator (supply) and user (demand) side offerings. The model is applied using data from Australian cities, suggesting that in most of the scenarios analysed a high standard bus service is the most cost-effective mode, because it provides lower operator costs (infrastructure, rolling stock and operating cost), access time costs (due to a larger number of lines) and waiting time cost (due to larger frequencies of operation). A rail mode, such as light rail or heavy rail, may have a lower total cost only if it is able to run faster than bus rapid transit, and the difference in speed is enough to outweigh the bus advantage on operator cost and access and waiting times.     

Tips and Pitfalls in PPP design

The Public-Private-Partnership (PPP) procedure is a very appealing model, but as it becomes more and more used in practice, problems and failures have been observed in the management of many projects. Many of these unfortunate experiences are consequences of errors in the implementation of the procedure, but in other cases, clear errors of conception were the cause.Indeed, there are many ways to structure a PPP and PPP is not the only way to manage an infrastructure scheme. It is thus an important task to provide guidelines on whether to use PPP or other types of procurement and, in case a PPP is preferred, on how to design it. The aim of this chapter is to contribute to this task, trying to combine theoretical knowledge and practical experience.After a review of the variety of economic characteristics of transport infrastructure and their procurement conditions, we recall the reasons that may justify this association of public and private management which is the characteristic of PPP, outlining the limits of using pure private or pure public procurement. Then an analytic process is proposed, screening the parameters which matter most for choosing the PPP procedure among many possible ones, depending on the specificities of the various transport modes. This process gives also indications on key elements for implementing a PPP.Finally, the analytic process proposed is used for a generic analysis of, respectively, the motorways and port sectors, so as to test its practicability and customizing capability for the use of public authorities.     

Regulation,trust and contractual incentives around transport contracts – Is there anything bus operators can learn from public air service contracts?

This paper compares recent experiences in contract negotiation and subsequent commitment in public air services with the bus industry. The heart of the paper is a survey of European and Australian regional airlines, which we mirror with revealed experiences of bus operators. We aim to identify a number of elements in the contracting regimes that have exposed ambiguity and significant gaps in what the principal (e.g., transport department) expected, and what the agent (airline or bus operator) believed they were obliged to deliver. Ultimately airline and bus services are similar in that public authorities procure transport services that are desirable for the society but would be unprofitable without government involvement. In both sectors (theoretically fairly similar) public transport contracts are used, and those usually include obligations and performance measurements. In terms of similarities, one of the surveyed contract details that had a perceived high clarity in both industries was “payment procedures” and amongst those with rather poor clarity was also in both industries “incentives to improve performance and grow patronage”. We also show differences between regional air services and bus operations with regard to performance measurement and pre-specified obligations. Because of the strong safety culture around air services we find that regulation and trusting partnerships are even more important to aviation than to the bus sector. Because of the high level of trust but also because of simpler and more complete contracts in aviation, there is much less (re-)negotiation going on compared to the bus operations.     

Towards a simplified performance-linked value for money model as a reference point for bus contract payments

The burgeoning commitment to contracting the delivery of bus services through competitive tendering or negotiated performance-based contracts has been accompanied by as many contract payments schemes as there are contracts. We are now well placed to design a simplified performance-linked payment (SPLP) model that can be used as a reference point to ensure value for money, given the accumulation of experiences throughout the world which have revealed substantive common elements in contracts. Whether the payment to the operator is framed as a payment per passenger or as a payment per service kilometre, the SPLP identifies efficient subsidy outcomes that are linked to a proxy indicator of net social benefit per dollar of subsidy. We illustrate how the SPLP model can be applied to obtain the gross (subsidy) cost per passenger (or per passenger km) from measures of gross cost efficiency and network effectiveness. This model can then be used as part of a benchmarking activity to identify reference value of money prospects in respect of passengers per $ subsidy outlay by adjusting for influences not under the control of the service provider. A single framework to identify contract payments to operators, and to assess (i.e., benchmark) operator performance on critical KPIs, is provided by internalising critical key performance indicators (KPIs) in the design of the SPLP. The proposed SPLP model is sufficiently general to be independent of the procurement method (competitive tendered or negotiated, for example) and of the treatment of revenue allocation (net or gross based contracts), with the additional advantage of being able to assess value for money for government.     

The Myth of Travel Time Saving

Abstract

The idea that the main benefit of improvements to transport infrastructure is the saving of travel time has been central to transport economic analysis. There is, however, little empirical evidence to support this proposition. Indeed, in the long run average travel time is conserved, implying that travellers take the benefit of improvements in the form of additional access to more distant destinations made possible by higher speeds. Such a perspective, based on considerations of the value of access, has implications for economic appraisal, modelling and policy.