双线自动闭塞区段旅客列车扣除系数计算方法的探讨

本文对旅客列车影响区和非影响区进行了分析，进而确定了非影响区及影响区内可铺画的货物列车数，提出了双线自动闭塞区段旅客列车扣除系数的分析计算方法。     

堆积体围岩中隧道洞口段修建技术

主要介绍丹 (东 )本 (溪 )高速公路的张家隧道右线洞口段通过弃渣堆积体围岩的施工技术。施工中采用自钻式锚杆和注浆工艺并获得成功。     

新型码头钢-混凝土组合面板

基于特殊需要,提出了带型钢加劲肋的钢板-混凝土组合板这一新型组合码头面板。以加劲肋形式、组合板厚度和栓钉布置为参数,进行了9块组合板的力学性能试验。试验结果表明,通过适当地选择型钢加劲肋形式、合理地布置栓钉和确定混凝土厚度,可以保证组合作用的发挥。组合板的正截面承载力可按基于修正平截面假定的极限状态计算;组合板的变形,可在按现行钢结构设计规范计算的基础上,加上考虑界面滑移影响的附加变形值予以修正。计算值与试验值吻合较好。     

清水冲刷河床调整过程试验研究

通过沙质河床清水冲刷水槽试验,对河床纵剖面的调整、沙波尺度、粗化层厚度及其与沙波运动关系、粗化层级配、推移质级配等进行了观测分析,进一步揭示了清水冲刷,河床重建平衡的机理。水槽试验表明,沙质河床清水冲刷,上游河段比降调平,床沙粗化,沙波发育,河床阻力增大,水深增大,流速减小,导致河床供沙能力削弱,输沙能力降低,冲刷向不冲刷转化。     

Using longitudinal methods for analysis of a short-term transportation demonstration project

This paper documents an application of panel, or longitudinal data collection in the evaluation of a TSM (Transportation Systems Management) demonstration project. The project was a four-week demonstration of staggered work hours in downtown Honolulu during February–March 1988. The 4 wave panel survey elicited commuting experiences of approximately 2,000 downtown employees at two week intervals before and during the project. The sample involved both employees who participated in the project by shifting their work hours, and those who did not. The panel survey was augmented by floating-car observations of travel times on major routes into downtown Honolulu on the same four dates.The purpose of the analysis was to determine whether employee commute times were affected, and if so, how these changes were distributed among various employee segments. Two methods were used. First, travel time changes were estimated using paired t-tests. Second, regression equations were used to estimate project time savings as a function of trip length, route, and location of residence. Results show that travel time savings due to the project were typically small, less than ten percent. Nonparticipants experienced greater savings than participants, and some segments of participants experienced longer travel times during the project. The panel method proved to be an effective way to measure project travel time impacts and shows that the method is appropriate in short time applications.Presented at the Annual Meeting of Transportation Research Board, January 7–11. 1990, Washington, D.C.     

高中速客专和高低速客货共线铁路不同坡段组合的动力学性能之比较研究

本文运用车辆-轨道耦合动力学新理论,仿真计算了列车以不同速度匹配通过不同类型纵断面时动力学性能的各项指标,并且根据现行铁道机车车辆动力学性能评定规范加以评价。结果表明:在本文设定的不同类型纵断面条件下,如单面坡划为多坡段或凹型坡加设分坡平段或凸型坡加设分坡平段,无论是高中速客车还是高低速客货混跑,采用新设计方案计算得到的指标略大于采用原设计方案得到的相应值,但差异不明显;所有方案下,除个别指标外,安全性指标均未超过合格限值,平稳性指标属优良等级。     

高速铁路桥上无缝线路纵向附加力研究

采用实体单元模拟桥梁及桥梁墩台、空间梁单元模拟钢轨、弹簧单元模拟桥梁与墩台及轨道之间的连接,建立梁—轨纵向相互作用三维有限元空间力学模型。以丰沙线永定河单线铁路桥梁、秦沈线沙河双线铁路桥梁对其进行计算验证。以秦沈客运专线32 m多跨双线整孔简支箱型梁桥为例进行纵向力分析,研究结果表明:列车在桥上双线对开,钢轨挠曲附加力有明显增大;列车在桥上单线制动,四根钢轨的制动附加力有较大的差别;列车在桥上双线对向制动,相比单线制动,钢轨制动附加力有一定程度增大,但增大得并不多。     

关于规定曲率弯矩方程弯矩正负号的问题

阐明了曲率弯矩方程的物理概念及用此方程建立梁(柱)弯曲微分方程的思路,论述了在建立梁(柱)弯曲微分方程中规定弯矩正负号(简称这种规定)引起的问题:1)这种规定破坏了曲率弯矩方程所反映的物理概念及用曲率弯矩方程建立梁(柱)弯曲微分方程的思路;2)这种规定导致了梁(柱)截面内力矩与梁(柱)曲率正负号无关的错误概念;3)按这种规定建立梁(柱)弯曲微分方程须记住弯矩正负号的规定,与此种规定对应的坐标系,不考虑梁(柱)曲率的正负号等3条内容,否则得出错误结果。建议材料力学在阐述梁(柱)弯曲微分方程中删去这种规定,以避免上述问题。     

正交异性钢桥面板纵肋与横肋连接构造细节

<正>交异性钢桥面板的纵肋与横肋连接是受力较复杂、病害较多构造部位。选取横肋腹板空孔、纵肋内隔板设置、纵肋与横肋间焊缝、横肋过焊孔等4个主要构造细节,从受力特性、病害及其治理、工程试验、加工工艺、各国规范发展等角度,系统地汇总正交异性钢桥面板纵肋与横肋连接构造的演变历程和发展现状,并总结经验教训。     

津秦客运专线CRTSⅡ无砟轨道先导段底座板施工技术

结合津秦客运专线CRTSⅡ无砟轨道先导段底座板的施工,介绍CRTSⅡ无砟轨道的结构组成,以及防水层的喷涂、剪力钉的安装、滑动层的铺设、混凝土垫块的设置、模板支护、钢筋工程、混凝土浇筑与养护、底座板的纵连等一系列施工工序。该施工技术确保了施工质量和工程精度要求。