西安市公交客运量的回归分析预测研究

公交客运量的预测研究是非常重要的工作,根据西安市公交运量的相关数据,应用多元回归方法对西安市公交客运量进行预测分析,来确定未来某一时段的客运量,为西安公交网络规划提供决策依据。     

交通事件持续时间预测贝叶斯网方法研究

交通事件持续时间的预测是事件管理系统的重要组成部分,根据I-880实测数据集,利用逐步回归分析的方法确定事件持续时间的主要影响因素,分别建立了应用于事件持续时间预测的朴素贝叶斯(NB)模型、加树朴素贝叶斯(TAN)模型以及一般贝叶斯网(BN)模型,在分析数据特点的基础上确定了贝叶斯网的推理算法、参数学习以及结构学习方法.在不同数据缺失的程度和不同训练样本规模下,分别对三种模型的预测准确率进行了评价,结果表明贝叶斯网预测模型在数据缺失30%的情况下30min准确率高于80%.     

含水率对砖砌体抗剪强度的影响

通过含水率对砖砌体抗剪强度影响规律的试验,分别测出不同砖砌体试件整体含水率、砖的含水率和砂浆缝砂浆的含水率与抗剪强度之间的关系,得到砖砌体试件随浸泡时间含水率的变化规律,给出了考虑含水率的砖砌体抗剪强度计算公式.通过试验可以看出,含水率对砖砌体抗剪强度有着重要影响,有关规范中应予以考虑.     

河北北部山区通村公路土基回弹模量对路面设计的影响研究

通过对河北北部山区通村公路进行现场试验,由回归分析得到土基回弹模量与弯沉的关系式,并根据不同土基强度与不同标准轴载对路面厚度设计的影响,对土基强度进行分级,可作为路面设计的依据。     

Lights,camera, legal action! The effectiveness of red light cameras on collisions in Los Angeles

This study estimates the effect of red light cameras (henceforth cameras) on collisions under the Los Angeles Automated Photo Enforcement Program that ran from 2006 to 2011. To control for selection bias and unobservables, a data set is constructed such that intersections with cameras are compared to control groups of nearby intersections without cameras, matched on observable characteristics. To capture potential spillover effects of cameras, control groups at various distances from the intersections with cameras are considered. A Poisson panel data model with random coefficients is applied to these data and estimated using Bayesian methods. The program suffered from weaknesses in enforcement. The city’s courts did not uphold citations and this dampened the effect cameras had on drivers. These problems are accounted for in modeling. Controlling for these concerns, results indicate that the cameras decreased red light running related collisions, but increased right-angle and injury collisions, as well as collisions overall.     

鱼雷内弹道特征参数估计的回归分析

论述了以建立回归方程为中心,利用有限的实验数据建立舰艇鱼雷发射内弹道特征参数（鱼雷出管速度、膛压极值）的线性回归方程。通过实验数据计算,证明这是一种舰艇鱼雷发射内弹道特征参数估算的有效方法。在回归分析法基础上,提出了如何进行实验的优化。     

Findings from subjective evaluations and driver ratings of vehicle dynamics: steering and handling

This paper investigates subjective assessments (SA) of vehicle handling and steering feel tests, both numerical and verbal, to understand drivers’ use of judgement scales, rating tendencies and spread. Two different test methods are compared: a short multi-vehicle first-impression test with predefined-driving vs the standard extensive single-vehicle free-driving tests, both offering very similar results but with the former saving substantial testing time. Rating repeatability is evaluated by means of a blind test. Key SA questions are identified by numerical subjective assessment autocorrelations and by generating word clouds from the most used terms in verbal assessments, with both methods leading to similar key parameters. The results exposed in this paper enable better understanding of SA, allowing improving the overall subjective testing and evaluation process, and improving the data collection and analysis process needed before identifying correlations between SA and objective metrics.     

Vertical random vibration analysis of vehicle–track coupled system using Green's function method

A vertical vehicle–track coupled dynamic model, consisting of a high-speed train on a continuously supported rail, is established in the frequency-domain. The solution is obtained efficiently by use of the Green's function method, which can determine the vibration response over a wide range of frequency without any limitations due to modal truncation. Moreover, real track irregularity spectra can be used conveniently as input. The effect of the flexibility of both track and car body on the entire vehicle–track coupled dynamic response is investigated. A multi-body model of a vehicle with either rigid or flexible car body is defined running on three kinds of track: a rigid rail, a track stiffness model and a Timoshenko beam model. The results show that neglecting the track flexibility leads to an overestimation of both the contact force and the whole vehicle vibration response. The car body flexibility affects the ride quality of the vehicle and the coupling through the track and can be significant in certain frequency ranges. Finally, the effect of railpad and ballast stiffness on the vehicle–track coupled vibration is analysed, indicating that the stiffness of the railpad has an influence on the system in a higher frequency range than the ballast.     

Speed variation during peak and off-peak hours on urban arterials in Shanghai

Increased speed variation on urban arterials is associated with reductions in both operational performance and safety. Traffic flow, mean speed, traffic control parameters and geometric design features are known to affect speed variation. An exploratory study of the relationships among these variables could provide a foundation for improving the operational and safety performance of urban arterials, however, such a study has been hampered by problems in measuring speeds. The measurement of speed has traditionally been accomplished using spot speed collection methods such as radar, laser and loop detectors. These methods can cover only limited locations, and consequently are not able to capture speed distributions along an entire network, or even throughout any single road segment. In Shanghai, it is possible to acquire the speed distribution of any roadway segment, over any period of interest, by capturing data from Shanghai’s 50,000+ taxis equipped with Global Positional Systems (GPS). These data, hereafter called Floating Car Data, were used to calculate mean speed and speed variation on 234 road segments from eight urban arterials in downtown Shanghai. Hierarchical models with random variables were developed to account for spatial correlations among segments within each arterial and heterogeneities among arterials. Considering that traffic demand changes throughout the day, AM peak, Noon off-peak, and PM peak hours were studied separately. Results showed that increases in number of lanes and number of access points, the presence of bus stops and increases in mean speed were all associated with increased speed variation, and that increases in traffic volume and traffic signal green times were associated with reduced speed variation. These findings can be used by engineers to minimize speed differences during the road network planning stage and continuing through the traffic management phase.     

Incorporating Driver Behaviors in Network Design Problems: Challenges and Opportunities

The goal of a network design problem (NDP) is to make optimal decisions to achieve a certain objective such as minimizing total travel time or maximizing tolls collected in the network. A critical component to NDP is how travelers make their route choices. Researchers in transportation have adopted human decision theories to describe more accurate route choice behaviors. In this paper, we review the NDP with various route choice models: the random utility model (RUM), random regret-minimization (RRM) model, bounded rationality (BR), cumulative prospect theory (CPT), the fuzzy logic model (FLM) and dynamic learning models. Moreover, we identify challenges in applying behavioral route choice models to NDP and opportunities for future research.