微型电动轿车车身骨架结构分析

利用ANSYS软件对某进口微型电动轿车车身骨架进行了强度、刚度和模态计算：分析了电动轿车车身骨架的结构特点和电瓶盒等钣金件的影响，提出了独立悬架边界条件的模拟方法。     

凌志LS430轿车电动倾斜和伸缩转向柱的故障诊断与维修

介绍了2001款凌志LS430型轿车电动倾斜与伸缩转向柱的组成和功能。该转向柱系统具有故障自诊断功能。介绍了故障码B2602钥匙开锁警告开关电路故障、故障码B2610倾斜位置传感器或电动机电路故障等的诊断。另外，介绍了执行器电源电路和ECU电源电路、倾斜电动机和伸缩电动机电路等的俭修     

沥青地库探索

应用导热油加热技术在中国已经发展了10多年,随着该技术的发展,地库也开始作为沥青贮仓.针对采用地库作为导热油加热沥青的这一技术,对地库的用热设备、导热油供热系统及沥青加热所需热量计算做了介绍.     

地下洞室群开挖过程的有限元模拟方法研究

针对开挖顺序和施工过程对地下洞室群稳定性的影响,探讨了地下洞室群开挖过程的有限元模拟方法。在重点解决有限元模拟开挖过程的关键技术问题(如释放荷载的计算和开挖模拟的有限元实施方法等)的基础上,结合某工程实例,并综合考虑施工条件,提出了合理的开挖顺序,具有一定的理论意义和工程实用价值。     

A cross-country study of fairness and infringement on freedom as determinants of car owners' acceptance of road pricing

Jakobsson et al. (2000) found that in Sweden public acceptance of road pricing decreases if it is perceived to be unfair and to infringe on freedom. The present study reports a survey investigating whether the same effects are found in the Asian countries of Japan and Taiwan. The results indicate that fairness plays the same role. However, income had a direct effect on acceptance in Taiwan but not in Japan or Sweden.     

Bus Priority Using pre-signals

The need to provide efficient public transport services in urban areas has led to the implementation of bus priority measures in many congested cities. Much interest has recently centred on priority at signal controlled junctions, including the concept of pre-signals, where traffic signals are installed at or near the end of a with-flow bus lane to provide buses with priority access to the downstream junction. Although a number of pre-signals have now been installed in the U.K., particularly in London, there has been very little published research into their design, operation and optimisation. This paper addresses these points through the development of analytical procedures which allow pre-implementation evaluation of specific categories of pre-signals. The paper initially sets out three categories of pre-signal, which have different operating characteristics, different requirements for signalling and different impacts on capacity and delay. Key issues concerning signalling arrangements for these categories are then discussed, together with a summary of the analytical approach adopted and the assumptions required. Equations are developed to allow appropriate signal timings to be calculated for pre-signalised intersections. Further equations are then developed to enable delays to priority and non-priority traffic, with and without pre-signals, to be estimated with delay being taken here as the key performance criterion. The paper concludes with three application examples illustrating how the equations are applied and the impacts of pre-signals in different situations.The analyses confirm the potential benefits of pre-signals, where these signals apply to non-priority traffic only. Where buses are also subject to a pre-signal, it is shown that disbenefits to buses can often occur, unless bus detectors are used to gain priority signalling.     

城市公交线网优化的线性模型

为了对现有公交线网进行优化,有效利用现有交通资源,解决城市交通问题,运用系统科学的思想,通过对城市公交线网优化的主要内容、优化原则、优化目标以及约束条件的分析,兼顾考虑乘客出行时间、公交线网密度和公交企业的利益以及公交线网的布局对整个城市的交通系统的影响,提出了优化目标的函数表达式及相应约束条件的数学表达式,建立了公交线网优化的线性模型,并给出了运用逐步筛选法对所提出的数学模型进行求解的方法。     

汽车防追尾碰撞数学模型研究

为了提高车辆在高速行驶状态下的主动安全性能,研究了处于追尾行驶状态的本车与前车的运动学特征;针对前车的不同运动状态分别推导出了跟车距离的计算模型并分析了模型中3个关键参数的随机性和动态性,对制动迟滞时间提出了基于模糊推理的确定方法,对本车制动减速度和前车的运动加速度提出了比较实用的动态测算公式;另外,研究了防追尾碰撞的控制与执行,建立了动态调整安全制动停车距离的神经网络模型,提出了基于危险裕度判别的安全控制方法。     

车辆折算系数的分类及算法

提出了标准车的选择原则:车长等于约定的长度;当交通流密度很小时,以道路设计速度行驶;驾驶员遵守交通规则。定义了微观车辆折算系数:交通流全部由标准车组成时的流量与交通流全部由某种车组成时的流量之比。定义了聚类车辆折算系数:组成该类车型的所有自然车的微观折算系数与组成比例的乘积之和。定义了宏观车辆折算系数:组成混合交通流的所有自然车的微观折算系数与组成比例的乘积之和。计算了这三种车辆折算系数。     

Autonomous cars: The tension between occupant experience and intersection capacity

Systems that enable high levels of vehicle-automation are now beginning to enter the commercial marketplace. Road vehicles capable of operating independently of real-time human control under an increasing set of circumstances will likely become more widely available in the near future. Such vehicles are expected to bring a variety of benefits. Two such anticipated advantages (relative to human-driver vehicle control) are said to be increased road network capacity and the freeing up of the driver-occupant’s time to engage in their choice of leisurely or economically-productive (non-driving) tasks.In this study we investigate the implications for intersection capacity and level-of-service of providing occupants of automated (without real-time human control), autonomously-operating (without vehicle-to-X communication) cars with ride quality that is equivalent (in terms of maximum rates of longitudinal and lateral acceleration) to two types of rail systems: [urban] light rail transit and [inter-urban] high-speed rail. The literature suggests that car passengers start experiencing discomfort at lower rates of acceleration than car drivers; it is therefore plausible that occupants of an autonomously-operating vehicle may wish to instruct their vehicle to maneuver in a way that provides them greater ride comfort than if the vehicle-control algorithm simply mimicked human-driving-operation.On the basis of traffic microsimulation analysis, we found that restricting the dynamics of autonomous cars to the acceleration/deceleration characteristics of both rail systems leads to reductions in a signalized intersection’s vehicle-processing capacity and increases in delay. The impacts were found to be larger when constraining the autonomous cars’ dynamics to the more-restrictive acceleration/deceleration profile of high-speed rail. The scenarios we analyzed must be viewed as boundary conditions, because autonomous cars’ dynamics were by definition never allowed to exceed the acceleration/deceleration constraints of the rail systems. Appropriate evidence regarding motorists’ preferences does not exist at present; establishing these preferences is an important item for the future research agenda.This paper concludes with a brief discussion of research needs to advance this line of inquiry.