舰艇作战系统研制中仿真技术的应用展望

文章简单回顾了仿真技术在舰艇作战系统研制中的应用，并就下阶段运用仿真测试技术进行了舰艇全武器系统作战能力分析等技术方向提出初步构想。     

预裂爆破中爆生裂缝扩展的机理探讨及预裂炮孔间距的设计方法

炸药爆炸产生的爆生裂缝是由爆炸应力波和爆生气体共同作用的结果。文中运用炸药爆炸的应力波理论,计算初始裂纹的长度;然后按照岩石的脆断理论计算爆生裂缝的最终扩展长度,对预裂爆破中爆炸作用过程和裂缝的扩展机理进行分析。同时还讨论了预裂炮孔间距的设计方法,认为在炮孔间距设计时,应考虑原生裂缝的存在。     

赛艇用预浸料的研制

以先进的碳纤维、芳纶纤维和高性能的环氧树脂为原料,研制适于制造赛艇的预浸料,介绍制备设备和技术,分析表明树脂溶液浓度和预浸料的线速度是影响预浸料树脂含量的因素,改进浸渍工艺后赛艇质量和性能有明显改善。     

A second order volume of fluid （VOF） scheme for numerical simulation of 2-D breaking waves

Among all environmental forces acting on ocean structures and marine vessels, those resulting from wave impacts are likely to yield the highest loads. Being highly nonlinear, transient and complex, a theoretical analysis of their impact would be impossible without numerical simulations. In this paper, a pressure-split two-stage numerical algorithm is proposed based on Volume Of Fluid (VOF) methodology. The algorithm is characterized by introduction of two pressures at each half and full cycle time step, and thus it is a second-order accurate algorithm in time. A simplified second-order Godunov-type solver is used for the continuity equations. The method is applied to simulation of breaking waves in a 2-D water tank, and a qualitative comparison with experimental photo observations is made. Quite consistent results are observed between simulations and experiments. Commercially available software and Boundary Integral Method (BIM) have also been used to simulate the same problem. The results from present code and BIM are in good agreement with respect to breaking location and timing, while the results obtained from the commercial software which is only first-order accurate in time has clearly showed a temporal and spatial lag, verifying the need to use a higher order numerical scheme.     

工程车辆牵引动力学概述及其研究回顾(3)

2.2动态牵引试验方法[7] 研究机器动态牵引性能的试验方法可分为现场试验、台架模拟试验和负荷车模拟试验.     

机车车辆动力学研究及发展

机车车辆动力学在最近10年得到迅速发展,考虑车辆—轨道耦合作用的耦合模型得到广泛应用。随着大跨距跨江铁路桥的建设,车和桥的耦合振动会引起接触网的振动,进而影响弓网的耦合振动。因此十分有必要开展接触网—受电弓—机车车辆—线路—桥梁耦合大系统动力学的研究。进行机车车辆动力学性能优化,必须首先确定机车车辆动力学三要素的优先关系,即运行的稳定性—安全性—平稳性,建立以列车为研究对象的模型,同时在模型中考虑机车车辆结构弹性和频变特征悬挂参数以及气流扰动的影响,进而进行灵敏度分析和参数优化。给出考虑频变特性的钢弹簧等效计算方法以及基于循环变量的列车系统动力学建模和计算方法,并验证了计算方法的有效性。     

电化区段预叠加UM－－71电码化的探讨

结合电气化改造工程，对电化区段25Hz相敏轨道电路预叠加UM--71电码化的可靠性及优点进行阐述，对一些技术难点进行分析。     

终南山公路隧道火灾温度分布规律的模拟试验

介绍终南山公路隧道1∶6模型火灾试验情况,给出公路隧道火灾温度场分布规律,为长隧道内设备选型、火灾预警及救授提供依据.