Development of a representative urban driving cycle construction methodology for electric vehicles: A case study in Xi’an

This paper develops a systematic and practical construction methodology of a representative urban driving cycle for electric vehicles, taking Xi’an as a case study. The methodology tackles four major tasks: test route selection, vehicle operation data collection, data processing, and driving cycle construction. A qualitative and quantitative comprehensive analysis method is proposed based on a sampling survey and an analytic hierarchy process to design test routes. A hybrid method using a chase car and on-board measurement techniques is employed to collect data. For data processing, the principal component analysis algorithm is used to reduce the dimensions of motion characteristic parameters, and the K-means and support vector machine hybrid algorithm is used to classify the driving segments. The proposed driving cycle construction method is based on the Markov and Monte Carlo simulation method. In this study, relative error, performance value, and speed-acceleration probability distribution are used as decision criteria for selecting the most representative driving cycle. Finally, characteristic parameters, driving range, and energy consumption are compared under different driving cycles.     

A novel classification method for driving simulators based on existing flight simulator classification standards

As technology has advanced and costs have fallen, the advantages of using simulators to train for safe, economical, and environmentally friendly driving have become more apparent. The need for a driving simulator classification arises from understanding and comparing simulator capabilities and options; however, only a limited number of studies have been conducted related to classification, calling for determination of methods and criteria. In this study, a classification method for driving simulators is proposed by adapting criteria for helicopter flight simulation training devices in which established methods of classification are defined by international and national regulators such as the Joint Aviation Authorities and Federal Aviation Administration. In the proposed method, the level of a simulator is determined by taking general characteristics under consideration, such as motion, visual, and sound systems. Through a case study, the method was applied to determine the class of a specific truck simulator.     

基于视频识别技术的无信号交叉口安全预警系统原型开发

基于视频识别技术开发无信号交叉口安全预警系统原型,在Visual Studio 2010开发环境下,借助halcon8.0图像处理算子,应用背景差法识别与跟踪运动车辆,实时采集车速、加速度、距离等微观交通信息,建立无信号交叉口安全通行模型实现动态安全预警功能,利用模型车辆测试系统的预警可靠性,在参数设置合理的条件下取得了87%的预警成功率。     

压缩空气动力汽车的基本原理及可行性分析

压缩空气动力汽车又称气动汽车,是一种“零排放”的新能源汽车。文章对气动汽车的优点和气动汽车的基本结构及工作原理进行介绍,然后利用数值分析的方法对气动汽车续驶里程进行分析,从而验证了其可行性。     

基于复杂网络的列车辅助驾驶危险致因传播模型

为了解预期功能安全(SOTIF)相关危险致因在基于智能感知的列车辅助驾驶系统 (IATDAS)中的传播特性，提升针对该类系统的危险控制能力，本文提出基于复杂网络的IATDAS 系统危险致因传播模型。该模型在SOTIF危险致因网络的基础上，提供了全局容量-负载传播机制，能有效刻画IATDAS系统的危险致因传播机制。案例分析结果表明：本文所提模型能够解决复杂致因关系下既有模型与系统实际情况不符的问题，如对于具有较长后续传播路径的致因，本文模型能够刻画其较难导致危险的实际特征；依据本文模型实施传播控制，可以显著降低危险致因的传播速度，如对影响节点范围大、前期影响节点数量增加快的危险因素进行控制时，可使其平均传播速度降低68%，比随机控制策略多降58%。该模型可以为IATDAS系统的SOTIF相关危险控制提供决策基础。     

Driving cycles that reproduce driving patterns,energy consumptions and tailpipe emissions

This study presents the Energy Based Micro-trip (EBMT) method, which is a new method to construct driving cycles that represent local driving patterns and reproduce the real energy consumption and tailpipe emissions from vehicles in a given region. It uses data of specific energy consumption, speed, and percentage of idling time as criteria of acceptable representativeness. To study the performance of the EBMT, we used a database of speed, fuel consumption, and tailpipe emissions (CO₂, CO, and NO_x), which was obtained monitoring at 1 Hz, the operation of 15 heavy-duty vehicles when they operated within different traffic conditions, during eight months. The speed vs. time data contained in this database defined the local driving pattern, which was described by 19 characteristic parameters (CPs). Using this database, we ran the EBMT and described the resulting driving cycle by 19 characteristics parameters (CPs*). The relative differences between CPs and CPs* quantified how close the obtained driving cycle represented the driving pattern. To observe tendencies of our results, we repeated the process 1000 times and reported the average relative difference (ARD) and the interquartile range (IQR) of those differences for each CP.. We repeated the process for the case of a traditional Micro-trip method and compared to previous results. The driving cycles constructed by the EBMT method showed the lowest values of ARDs and IQRs, meaning that it produces driving cycles with the highest representativeness of the driving patterns, and the best reproduction of energy consumption, and tailpipe emissions.     

Development of two driving cycles for utility vehicles

Driving cycles are used to assess vehicle fuel consumption and pollutant emissions. The premise in this article is that suburban road-work vehicles and airport vehicles operate under particular conditions that are not taken into account by conventional driving cycles. Thus, experimental data were acquired from two pickup trucks representing both vehicle fleets that were equipped with a data logger. Based on experimental data, the suburban road-work vehicle showed a mixed driving behavior of high and low speed with occasional long periods of idling. In the airport environment, however, the driving conditions were restricted to airport grounds but were characterized by many accelerations and few high speeds. Based on these measurements, microtrips were defined and two driving cycles proposed. Fuel consumption and pollutant emissions were then measured for both cycles and compared to the FTP-75 and HWFCT cycles, which revealed a major difference: at least a 31% increase in fuel consumption over FTP-75. This increased fuel consumption translates into higher pollutant emissions. When CO₂ equivalent emissions are taken into account, the proposed cycles show an increase of at least 31% over FTP-75 and illustrate the importance of quantifying fleet speed patterns to assess CO₂ equivalent emissions so that the fleet manager can determine potential gains in energy or increased pollutant emissions.     

The role of alternative fuel vehicles: Using behavioral and sensor data to model hierarchies in travel

Greater adoption and use of alternative fuel vehicles (AFVs) can be environmentally beneficial and reduce dependence on gasoline. The use of AFVs vis-à-vis conventional gasoline vehicles is not well understood, especially when it comes to travel choices and short-term driving decisions. Using data that contains a sufficiently large number of early AFV adopters (who have overcome obstacles to adoption), this study explores differences in use of AFVs and conventional gasoline vehicles (and hybrid vehicles). The study analyzes large-scale behavioral data integrated with sensor data from global positioning system devices, representing advances in large-scale data analytics. Specifically, it makes sense of data containing 54,043,889 s of speed observations, and 65,652 trips made by 2908 drivers in 5 regions of California. The study answers important research questions about AFV use patterns (e.g., trip frequency and daily vehicle miles traveled) and driving practices. Driving volatility, as one measure of driving practice, is used as a key metric in this study to capture acceleration, and vehicular jerk decisions that exceed certain thresholds during a trip. The results show that AFVs cannot be viewed as monolithic; there are important differences within AFV use, i.e., between plug-in hybrids, battery electric, or compressed natural gas vehicles. Multi-level models are particularly appropriate for analysis, given that the data are nested, i.e., multiple trips are made by different drivers who reside in various regions. Using such models, the study also found that driving volatility varies significantly between trips, driver groups, and regions in California. Some alternative fuel vehicles are associated with calmer driving compared with conventional vehicles. The implications of the results for safety, informed consumer choices and large-scale data analytics are discussed.     

A context aware system for driving style evaluation by an ensemble learning on smartphone sensors data

There are many systems to evaluate driving style based on smartphone sensors without enough awareness from the context. To cover this gap, we propose a new system namely CADSE system to consider the effects of traffic levels and car types on driving evaluation. CADSE system includes three subsystems to calibrate smartphone, to classify the maneuvers, and to evaluate driving styles. For each maneuver, the smartphone sensors data are gathered in three successive time intervals referred as pre-maneuver, in-maneuver, and post-maneuver times. Then, we extract some important mathematical and experimental features from these data. Afterwards, we propose an ensemble learning method on these features to classify the maneuvers. This ensemble method includes decision tree, support vector machine, multi-layer perceptron, and k-nearest neighbors. Finally, we develop a rule-based fuzzy inference system to integrate the outputs of these algorithms and to recognize dangerous and safe maneuvers. CADSE saves this result in driver’s profile to consider more for dangerous driving recognition. The experimental results show that accuracy, precision, recall, and F-measure of CADSE system are greater than 94%, 92%, 92%, and 93%, respectively that prove the system efficiency.     

Crash prediction with behavioral and physiological features for advanced vehicle collision avoidance system

Real-time crash prediction is the key component of the Vehicle Collision Avoidance System (VCAS) and other driver assistance systems. The further improvements of predictability requires the systemic estimation of crash risks in the driver-vehicle-environment loop. Therefore, this study designed and validated a prediction method based on the supervised learning model with added behavioral and physiological features. The data samples were extracted from 130 drivers’ simulator driving, and included various features generated from synchronized recording of vehicle dynamics, distance metrics, driving behaviors, fixations and physiological measures. In order to identify the optimal configuration of proposed method, the Discriminant Analysis (DA) with different features and models (i.e. linear or quadratic) was tested to classify the crash samples and non-crash samples. The results demonstrated the significant improvements of accuracy and specificity with added visual and physiological features. The different models also showed significant effects on the characteristics of sensitivity and specificity. These results supported the effectiveness of crash prediction by quantifying drivers’ risky states as inputs. More importantly, such an approach also provides opportunities to integrate the driver state monitoring into other vehicle-mounted systems at the software level.