通渝隧道围岩变形的神经网络预测

隧道新奥法施工中，常以围岩变形量作为评判围岩稳定性和支护结构经济合理性的重要指标。公路隧道围岩变形量是随时间而变化的数据序列，因而可以建立一些实时跟踪预测模型和方法。根据通渝隧道围岩拱顶下沉位移变形的特性，采用神经网络技术来预测其变形量，结果表明该方法简易、有效。     

客车主要噪声源识别的试验研究

基于偏奇异值分析法识别噪声源的基本原理，采用了近场声压测量法，同步采集15个传感器的振动与声压信号，识别出客车车外噪声的主要噪声源，分析出各噪声源对车外噪声的贡献并做出降低车外噪声的预测分析。所采用的试验与分析方法具有计算量小、声源定位准确的特点，并且可以准确预测零部件的改进对车外噪声的影响。试验研究和实车应用表明，这种方法可以适用于复杂的工程实际。     

基于数理统计方法的铁路隧道衬砌质量缺陷分析

目前,利用地质雷达法检测隧道衬砌质量时,通常仅对隧道衬砌缺陷进行描述,较少深入分析这些缺陷的内在分布规律。采用数理统计的方法,对某在建铁路工程14座隧道共285个衬砌质量缺陷样本的分布规律进行分析。研究表明,(1)在不同测线部位,其缺陷率、不同缺陷类型占该测线缺陷比例、缺陷径向尺寸的最大值、平均值及样本标准差均不同;(2)缺陷径向尺寸总体服从正态分布;(3)在给定显著性水平α=0.05下,缺陷径向尺寸总体均值μ的一个置信区间为(17.99,20.24),方差σ2的一个置信区间为(76.63,110.71);(4)Ⅱ、Ⅲ、Ⅳ级围岩段落的衬砌缺陷径向尺寸均值无显著差异,但与Ⅴ级围岩段落有显著差异。     

Tuning of transfer functions for analysis of wave–ship interactions

Transfer functions are often used together with a wave spectrum for analysis of wave–ship interactions, where one application addresses the prediction of wave-induced motions or other types of global responses. This paper presents a simple and practical method which can be used to tune the transfer function of such responses to facilitate improved prediction capability. The input to the method consists of a measured response, i.e. time series sequences from a given sensor, the 2D wave spectrum characterising the seaway in which the measurements are taken, and an initial estimate of the transfer function for the response in study. The paper presents results obtained using data from an in-service container ship. The 2D wave spectra are taken from the ERA5 database, while the transfer function is computed by a simple closed-form expression. The paper shows that the application of the tuned transfer function leads to predictions which are significantly improved compared to using the transfer function without tuning.     

基于ANN的船舶撞击高桩码头群桩损伤位置预测

本文采用有限元软件ABAQUS建立了船舶撞击高桩码头群桩的空间有限元模型。通过计算评估了撞击力、桩体刚度、撞击位置和撞击角度下对群桩结构损伤位置的影响。基于人工神经网络(ANN)方法,对不同参数组合下的群桩结构损伤位置进行了预测,并对ANN方法的可行性进行了评估。     

Forecasting current and next trip purpose with social media data and Google Places

Trip purpose is crucial to travel behavior modeling and travel demand estimation for transportation planning and investment decisions. However, the spatial-temporal complexity of human activities makes the prediction of trip purpose a challenging problem. This research, an extension of work by Ermagun et al. (2017) and Meng et al. (2017), addresses the problem of predicting both current and next trip purposes with both Google Places and social media data. First, this paper implements a new approach to match points of interest (POIs) from the Google Places API with historical Twitter data. Therefore, the popularity of each POI can be obtained. Additionally, a Bayesian neural network (BNN) is employed to model the trip dependence on each individual’s daily trip chain and infer the trip purpose. Compared with traditional models, it is found that Google Places and Twitter information can greatly improve the overall accuracy of prediction for certain activities, including “EatOut”, “Personal”, “Recreation” and “Shopping”, but not for “Education” and “Transportation”. In addition, trip duration is found to be an important factor in inferring activity/trip purposes. Further, to address the computational challenge in the BNN, an elastic net is implemented for feature selection before the classification task. Our research can lead to three types of possible applications: activity-based travel demand modeling, survey labeling assistance, and online recommendations.     

Driving cycle prediction model based on bus route features

Bus fuel economy is deeply influenced by the driving cycles, which vary for different route conditions. Buses optimized for a standard driving cycle are not necessarily suitable for actual driving conditions, and, therefore, it is critical to predict the driving cycles based on the route conditions. To conveniently predict representative driving cycles of special bus routes, this paper proposed a prediction model based on bus route features, which supports bus optimization. The relations between 27 inter-station characteristics and bus fuel economy were analyzed. According to the analysis, five inter-station route characteristics were abstracted to represent the bus route features, and four inter-station driving characteristics were abstracted to represent the driving cycle features between bus stations. Inter-station driving characteristic equations were established based on the multiple linear regression, reflecting the linear relationships between the five inter-station route characteristics and the four inter-station driving characteristics. Using kinematic segment classification, a basic driving cycle database was established, including 4704 different transmission matrices. Based on the inter-station driving characteristic equations and the basic driving cycle database, the driving cycle prediction model was developed, generating drive cycles by the iterative Markov chain for the assigned bus lines. The model was finally validated by more than 2 years of acquired data. The experimental results show that the predicted driving cycle is consistent with the historical average velocity profile, and the prediction similarity is 78.69%. The proposed model can be an effective way for the driving cycle prediction of bus routes.     

A hybrid deep learning based traffic flow prediction method and its understanding

Deep neural networks (DNNs) have recently demonstrated the capability to predict traffic flow with big data. While existing DNN models can provide better performance than shallow models, it is still an open issue of making full use of spatial-temporal characteristics of the traffic flow to improve their performance. In addition, our understanding of them on traffic data remains limited. This paper proposes a DNN based traffic flow prediction model (DNN-BTF) to improve the prediction accuracy. The DNN-BTF model makes full use of weekly/daily periodicity and spatial-temporal characteristics of traffic flow. Inspired by recent work in machine learning, an attention based model was introduced that automatically learns to determine the importance of past traffic flow. The convolutional neural network was also used to mine the spatial features and the recurrent neural network to mine the temporal features of traffic flow. We also showed through visualization how DNN-BTF model understands traffic flow data and presents a challenge to conventional thinking about neural networks in the transportation field that neural networks is purely a “black-box” model. Data from open-access database PeMS was used to validate the proposed DNN-BTF model on a long-term horizon prediction task. Experimental results demonstrated that our method outperforms the state-of-the-art approaches.     

高精度陀螺全站仪在长大铁路隧道CPⅡ平面控制网分段建网测量中的应用

为了确保隧道贯通前CPⅡ分段建网的精度,保障隧道的顺利施工,以格库铁路阿尔金山隧道为工程背景,采用高精度陀螺全站仪对洞内CPⅡ平面控制网加测多条陀螺边,并提出了陀螺定向精度观测精度内检核、多条陀螺边定向复核的方法,对陀螺定向边位置的选择、陀螺方位角观测中误差、陀螺方位角观测值的应用区间进行探讨。应用高精度陀螺定向成果对比分析洞内CPⅡ分段控制网成果,从理论上探讨了加测陀螺边对CPⅡ控制网贯通预计精度的影响,解决了隧道贯通前CPⅡ平面控制网精度无法验证的问题,确保了CPⅡ分段建网的精度,总结出一套高精度陀螺全站仪在长大铁路隧道CPⅡ平面控制网分段建网测量中的应用方法,其中包括陀螺定向边间距约2 km、陀螺定向边采用对向观测、每测站数不小于4测回且观测方向平均测角中误差应小于仪器精度(3.6″)、依据陀螺观测计算方位角与导线推算方位角较差值并将成果应用划为三个应用区间、依据陀螺定向观测精度变换权重降低贯通预计值、优化约束平差计算方案等。