浅水波作用下护底块石对斜坡式护岸稳定性影响

在水深较小,原泥面为斜坡岩基的场区建造护岸时,应重视护底块石的设计。波浪在护底块石的上方发生破碎,卷破波对护底块体产生沿海侧方向的拖拽作用,从而导致护底块石失稳并引起护面块体的滑动。结合某护岸加固工程的方案设计和物理模型试验成果,提出在护底设计中,应结合增加护底块石质量与增大原泥面糙率两种措施制定护底块石方案;有条件时可通过增加护底长度或埋深的方式设置护底。     

关于木材运输船安全运输的几点分析

木材船海上运输具有一定的风险,一旦积载和绑扎不当或管理不妥,造成货物滚动、移位、货垛倒塌,就会引发安全事故甚至导致船舶倾覆。因此,加强木材船的安全管理,落实各项安全保障措施,是确保木材船安全运输生产的重要举措。     

基于CUDA的散货船稳性并行计算

为提高散货船配载仪中船舶稳性计算速度,通过使用CUDA(Compute Unified Device Architecture)对稳性计算过程进行并行加速.首先基于CGAL(Computational Geometry Algorithms Library)中的切片模块按肋位纵向切割船体型表面,得到每个肋位处横剖面型值数据;然后对横剖面型值数据进行等距偏移模拟板厚,得到各肋位处的外板数据;然后将外板数据发往GPU;在GPU中通过水线面和外板数据求解并行计算雅克比矩阵系数;最后将雅可比矩阵系数传回CPU,求解稳性方程组.     

钢檩条设计中的若干问题

轻型屋面钢檩条的竖向荷载、整体稳定性计算以及檩条与屋面梁、屋架的连接构造是设计的重要环节,本文结合规范和国家标准设计图的编制提出若干问题,供参考.     

薄基岩顶板隧道爆破施工围岩稳定性分析

为更有效地进行薄基岩顶板条件下隧道施工安全控制,以某高速公路隧道为工程背景,运用数值模拟的方法,分别研究不同顶板厚度下隧道爆破施工引起的围岩振速分布特征及其对围岩的损伤情况,并进行围岩稳定性分析。结果表明:1)当顶板厚度在5 m及以上时,围岩是稳定的;2)当顶板厚度为3 m时,最危险横断面上基岩顶板内开始产生严重的拉伸裂缝及一些径向裂缝,将形成超挖;3)当顶板厚度≤2 m时,径向裂缝贯穿顶板岩体,围岩稳定性较差,在掌子面后1 m内可能发生塌落、掉块等事故。     

Magneto-rheological suspensions for improving ground vehicle’s ride comfort,stability, and handling

ABSTRACT

A state-of-the-art discussion on the applications of magneto-rheological (MR) suspensions for improving ride comfort, handling, and stability in ground vehicles is discussed for both road and rail applications. A historical perspective on the discovery and engineering development of MR fluids is presented, followed by some of the common methods for modelling their non-Newtonian behaviour. The common modes of the MR fluids are discussed, along with the application of the fluid in valve mode for ground vehicles’ dampers (or shock absorbers). The applications span across nearly all road vehicles, including automobiles, trains, semi-trucks, motorcycles, and even bicycles. For each type of vehicle, the results of some of the past studies is presented briefly, with reference to the originating study. It is discussed that Past experimental and modelling studies have indicated that MR suspensions provide clear advantages for ground vehicles that far surpasses the performance of passive suspension. For rail vehicles, the primary advantage is in terms of increasing the speed at which the onset of hunting occurs, whereas for road vehicles – mainly automobiles – the performance improvements are in terms of a better balance between vehicle ride, handling, and stability. To further elaborate on this point, a single-suspension model is used to develop an index-based approach for studying the compromise that is offered by vehicle suspensions, using the H₂ optimisation approach. Evaluating three indices based on the sprung-mass acceleration, suspension rattlespace, and tyre deflection, it is clearly demonstrated that MR suspensions significantly improve road vehicle’s ride comfort, stability, and handling in comparison with passive suspensions. For rail vehicles, the simulation results indicate that using MR suspensions with an on-off switching control can increase the speed at which the on-set of hunting occurs by as much as 50% to more than 300%.     

A study on the stability of a motorcycle wheel–swingarm suspension with chain transmission

The present study describes a possible driving mechanism for a self-excited oscillation observed in motorcycle dynamics, often referred to as chatter. This phenomenon, affecting the performance of road racing motorcycles, has been simulated in straight running braking manoeuvres with multibody motorcycle models. It involves rear suspension bounce and driveline oscillation in the frequency range between 17 and 22?Hz. A simplified model of a motorcycle rear suspension with chain transmission is proposed and its stability in equilibrium configurations is studied via eigenvalue analysis. The sensitivity with respect to all its governing parameters is analysed by means of stability maps and the self-excitation mechanism is explained with the aid of energy balance analysis and phase diagrams. It is found that the key role for the instability onset is played by the gradient of the nonlinear characteristic slip function of the tyre.     

水泥粉煤灰碎石基层材料路用性能的研究

对水泥粉煤灰碎石基层材料的各项路用性能进行了试验研究.研究表明,水泥粉煤灰稳定碎石兼具水泥和二灰稳定材料的优点,将其作为路面基层材料是可行的.     

水泥稳定碎石基层的病害及防治措施

对水泥稳定碎石基层的裂缝、离析、平整度差等常见病害的产生原因进行了分析,并提出了相应的防治措施,以保证水稳碎石基层的正常使用功能。     

旧水泥路面沥青混凝土罩面补强

道路路面达到设计使用年限渐渐产生破坏,需要对原有路面进行适当处理,讲述了水泥混凝土路面加铺沥青路面的一些研究。