基于裂纹扩展理论的船体结构疲劳评估

疲劳破坏是船舶结构的主要破坏形式之一。为了保证船舶结构有足够的疲劳强度,各国船级社、船厂等均建立了船舶结构疲劳强度校核规范作为船舶疲劳评估的指导性文件,尽管这些规范均是建立在S-N曲线方法基础上的,但由于S-N曲线方法存在自身无法克服的缺陷(如忽略材料的初始缺陷等),对同一节点进行计算得到的疲劳寿命大相径庭。该文作者在基于裂纹扩展理论的基础之上,给出了一套详细的船体结构疲劳评估方法,并应用此方法对大型船舶结构典型节点的疲劳寿命进行评估,以期能为完善船舶结构疲劳寿命的评估提供参考。     

Structural response of a flexible pipe with damaged tensile armor wires under pure tension

This article studies the structural response of a 6.0” flexible pipe under pure tension considering intact and damaged conditions. In the damaged condition, several wires of the tensile armor layers are assumed to be broken. A three-dimensional nonlinear finite element (FE) model devoted to analyze the local mechanical response of flexible pipes is employed in this study. This model is capable of representing each tensile armor wire and, therefore, localized defects, including total rupture, may be adequately represented. Results from experimental tests validate the FE predictions and indicate a reduction in the axial stiffness of the pipe, a non-uniform redistribution of forces among the remaining intact wires of the damaged tensile armor layers and high stress concentrations in the wires near the broken ones. Moreover, the FE model indicates that significant normal bending stresses may arise in the pressure armor and inner carcass due to an uneven pressure distribution on these layers. Finally, the results obtained are employed to estimate the pull out capacity of the studied flexible pipe.     

富水软土地层浅埋大跨隧道设计

本文以一座设计开挖宽度近 2 0 m,而覆盖层仅 3m左右的地下过街通道为例 ,分析判断富水软土地层中采用浅埋暗挖法隧道设计施工存在的问题和解决的方法。     

Extensive study on the design loads used for strength assessment of tanker and bulk carrier structures

ClassNK has undertaken wide-ranging basic research covering many aspects related to the safety of ship structures, including design loads, structural analysis, strength assessment of buckling, collapse, and fatigue, and rational corrosion margins to develop new design standards which have transparency and consistency. Among the wide-ranging basic research, this article summarizes the results of extensive work on the design loads used for strength assessments of tanker and bulk carrier structures. The main aim of the research was to develop practical estimation methods of design loads with rational technical backgrounds relating to the actual loads acting on the primary structural members of tankers and bulk carriers. During this study, we proposed the following methodology. Design sea states that closely resemble the actual sea states which are considered to be the most severe for hull structures. Find practical estimation methods for the design sea states by parametric studies using the results of series calculations on representative tankers and bulk carriers. Find practical estimation methods for design regular waves which will result in the same level of stresses as those induced in irregular waves under the design sea states. We also briefly introduced some practical estimation methods for the design loads, such as ship motions, accelerations, hull-girder bending moments, and hydrodynamic pressures that are induced under design regular waves. The findings in this study have been summarized and implemented in the new design standards for tanker and bulk carrier structures.Updated from the Japanese original which won the 2003 SNAJ prize (J Soc Nav Archit Jpn 2002; 191:195–207; 2002; 191:208–220; and 2002; 192:723–733)     

Kerr介质腔中三能级原子与腔场相互作用系统量子保真度

研究了Kerr介质腔中相干态单模场与级联三能级原子共振相互作用系统中量子保真度的演化特性.结果表明,对真空初场,原子、场及系统保真度都呈现调制周期振荡;对不依赖强度的原子-场耦合系统,增大Kerr效应或增强初场强度都能提高原子的量子保真度,在原子量子保真度复苏时区同时提升场和系统的量子保真度,但对依赖强度耦合系统却无此作用.     

机车车辆焊接结构疲劳分析关键问题研究

为确保铁道机车车辆各焊接承载部件在整个寿命期间安全可靠,在分析国际上对动态承载焊接结构疲劳研究的基础上,提出机车车辆焊接部件疲劳分析应明确的各类关键问题.主要包括焊接结构的疲劳特征、应力分析原则和应力谱的确定、疲劳评定方法和强度数据的选取、累积损伤准则的实际应用及多轴疲劳的处理方法等.疲劳理论经典算法表明,上述关键问题的较好解决将有助于大幅地提高疲劳分析精度,将其应用于结构设计可保证焊接承载部件具有足够的疲劳强度.     

On the dispersion relation of hydroelastic waves in a plate

This paper deals with the dispersion relation of hydroelastic waves in pontoon-type very large floating structures (VLFS) using a simple beam modeling, where the term hydroelastic waves means propagation of deflection vibrations in VLFS. The purpose of this paper is to show the properties of the hydroelastic waves. The dispersion relation of hydroelastic waves propagating in an infinite plate floating on the water is derived based on the linear water wave theory. The effects of the water depth and of the bending rigidity of the floating plate on the wavelength, phase velocity, and group velocity of the hydroelastic waves are shown theoretically or numerically. Then, the dispersion relation of hydroelastic waves in a finite plate floating on shallow water is investigated. It is shown that the wavelength or the phase velocity of the hydroelastic waves varies with the location in the plate. Received for publication on April 7, 1999; accepted on Aug. 20, 1999     

Fast direction of arrival algorithm based on vector-sensor arrays using wideband sources

An acoustic vector sensor （AVS） can capture more information than a conventional acoustic pressure sensor （APS）. As a result, more output channels are required when multiple AVS are formed into arrays, making processing the data stream computationally intense. This paper proposes a new algorithm based on the propagator method for wideband coherent sources that eliminates eigen-decomposition in order to reduce the computational burden. Data from simulations and lake trials showed that the new algorithm is valid： it resolves coherent sources, breaks left/right ambiguity, and allows inter element spacing to exceed a half-wavelength.     

汽车轻量化的现状及展望（续1）

减少汽车质量不仅是人类社会的需求，也是汽车使用者的需求。目前，世界上很多国家正在开展汽车轻量化的研究，并且有了富有成效的成果。为了达到减轻汽车质量的目的，最有效的途径是使用新材料、制造新技术和改进汽车结构。通过这些途径，汽车的安全性，舒适性，操纵性等都会得到提高。通常使用高强度钢板、铝合金、镁合金可以减轻汽车质量。新制造技术包括设计新结构、改善制造以及装配工艺。未来将不断研发新材料、新工艺，以满足汽车轻量化的更多需求。     

船舶结构混合变量优化的遗传算法

本文针对船舶结构优化设计中普遍存在的混合离散变量现象，对遗传算法进行了若干探讨和改进，以直接获得实用的最优解。通过两个船舶结构优化的算例，验证了本文方法的有效性。